MICTUNINGLight Bar Wiring Kit,LED Light Bar Wiring Harness for Car Motor Lamps Waterproof 40A Relay ON-OFF Waterproof Switch

used it for led light bar

Decent quality and wired up in a few moments comes with spare spade terminals for your lights too and a few spare fuses

Easy and straightforward to fit, you really can't go wrong with this.

Arrived a little late but seems pretty decent. The wiring loom is quite long and appears well put together . The wiring is heavy gauge. The switch is designed to be flat mount and has 3 wires so was unsuitable for my motorbike so I have ordered a new one more suitable.Plenty long enough and the relay is well put together with a special clip holding the cables on to it which is heat shrinked. I wanted the switch to run only when the ignition was on so I needed to know which was the switched connector. I had to disassemble the heat wrap and found the correct wire is blue not white. I cut the blue wire which powers the light on the rocker switch. Connected it to the options plug on my bike and bingo worked nicely.For the price you cant really go wrong. A relay from halfords if £ 4.99 on its own.

Worked a treat and easy to use

I first bought one of these to wire up some roof lights on my 4X4, all the bits you need are there, the only problem would be as with any other wiring project, routing, with the roof lights I had to modify the ends as I needed to fit a water proof plug I also shortened the wires to the switch but it's quite adaptable. I bought another for some spot lights again only needing to extend one of the light connection wire's to reach across to the second spot, easier than trying to get all the parts separate and working out how to wire it up if your not electrically minded.

So much easier than forming my own loom. Fitted in minutes to a light bar on pick up. The remote even allowed me to not bother fitting switch through dash..

Amazing quality for the price. Highly recommend