2 Bike Rack Bicycle Carrier Racks Hitch Mount Double Foldable Rack for Cars Truck SUV Fits 2" Hitch Receiver, Including Anti-Rattle Hitch Tightener

I have used many bike racks for racking my mountain bikes but his is one of the best and easy setup bike racks.Very easy to build from scratch took me just under 30 mins to setup and go from scratch.Holds bikes very securely without any trembling.Quick and easy removable latch for opening the car hood space.Holds upto 4 bikes and the holder is sturdy enough to carry good weight from the bikes.Heavyduty and perfect for all sized bikes.The length can be expandable for easy maneuvering of the bikes.If nkt used the rack can be set down for safety.Overall this bike rack is made sturdy and has good and easy way to setup bikes for travel and other needs.Great product and I highly recommend this bike rack.

very well made and sturdy.they were presants to my kids so they could take their kids bikes on a family trip. they worked well

Good enough. The first kit I got was rusty. The interior of all three square-tube pieces were rusty. Only the mounting hardware and "stabilization plate" were fine. The seller sent me a replacement kit, which was rust free. It has pretty loose tolerances, and wobbles a fair bit from side to side. The "stabilization plate" helps, by clamping onto the bottom lip of the receiver. I added thick paint to both the hitch end of the tube, and both surfaces of the rack's own separation point, and that tightened it up a bit. It still sways a bit, and occasionally rattles when driving over bumps.Once installed, putting the bikes on here is pretty easy. The holders on each fork (to hold the bike frame) seem a little cheap, but good enough for now. The plastic base tents to deform a bit with a heavy bike, but they haven't broken. The rubber strap which goes over the top of the bike frame, is a little tough to secure onto the button-thing. However, it is doable. I don't quite trust it enough, so I add a ratchet strap of my own.It may or may not be possible to carry 4 bikes. If done carefully, you probably could. You can definitely fit 3.

This was easy for my husband to install on my car and we were able to fit our two bikes to go riding this weekend. There was a little bit of rattling but nothing he couldn’t adjust to keep it tight. So far we are happy with it!

Highly recommend this product by Ikuram. It's heavyweight and sturdy, easy to install. The anti-wobble hitch plate makes it all worthwhile. I load my bike on it maybe once or twice a month, so I take off the bikestand and just leave the hitch on. So easy to do that, and I can get into the back of my SUV much easier.

No idea what happened to my review that I wrote last year but I’m glad I came across this again so I can share how big of a piece of crap this rack is! Just bought a $3000 bike, my first full suspension, and it has a beautiful blue to green transition paint job on it. I used this rack less than 3 times and it did irreversible damage to my bike. If it wasn’t for my dad noticing it first on his full carbon bike (that costs over $5,000) it would’ve taken longer for me to realize what it was doing. The parts of the rack that touch the bike are cheap and rub and slide, which is what scratched the paint off the underside of my bottom tube. It also started peeling my factory sticker off the vertical tube below my seat. My dad was pissed bc our bikes clanged together on our short 20 minute drive to a local trail and put scratches on his carbon frame. This rack sucks for even one bike, let alone two or more. Don’t waste your money or take the risk of this piece of junk causing damage. Biggest regret purchase of the past few years for me.

I ordered this bike rack extension specifically for a long road trip (1500+ miles) where camping and off-roading would be part of a long week of travel. Let me start off with the positives:1. The rack works and can accommodate 3 bicycles IF one of them is smaller. We had 2 adult bikes and one kid's bike and I was able to arrange them on the supports to get them all to fit.2. Strong support over a LONG road trip. The three bikes were held pretty securely, with very little bouncing or movement. However, I added extra bungee straps to tighten the bikes together and prevent the handlebars from turning during the drive. I would recommend using extra straps. The built-in rubber straps do work, but I'll cover them in the Cons.3. The entire fold-down system does work and allows the racked bikes to be moved far enough down to open a hatch on my Toyota Sienna minivan if there is no ground slop (flat/level ground). If there is any slope or uneven ground, the position of the bikes may have to be adjusted to open the hatch beyond the handlebars, depending on how you attached them.4. The supplied bracing/anti-jiggle plate part works as advertised if installed and secured tightly, greatly reducing the movement and vibrations. I HIGHLY recommend performing this extra step.Cons:1. The adjustment clasps for holding the bikes are difficult to secure with an Alen wrench, and even after tightening securely, still moved during the long drive. Several clasps were in completely different rotations upon arrival.2. The supplied leather straps to bind the bikes to the six clasps worked, but you cannot use them too tightly. During the trip multiple straps stretched, elongating the holes and allowing one of them to come undone. This was a long road trip, so shorter ones may not have the same problem. However, I'd recommend only using the second tight notch and using additional securing from other cords.3. The lift-down system is awkward and difficult to use when the rack is loaded. The shaft is held in place by metal pins through holes, which have to be pulled out to lower the rack away from the back of the vehicle. Unfortunately, the holes are not perfectly aligned, and any weight put onto the rack pins the metal pin into place. You have to lift up on the rack to remove the pin to lower the shaft from the vehicle, which is difficult to do when it's loaded with 3 bikes. It was awkward to both remove and reinsert the pin because of this, making access to the back o the vehicle undesirable.4. The binding/anti-giggle plate is finicky and does not stay installed. Because of the low draw of the Sienna minivan, the bracing plate is only about 6 inches off the ground. As a result, any bump, ramp, or uneven ground will cause the bolts of the plate to scrape and the entire locking plate comes loose. We had to re-tighten the plate multiple times and at least once at nearly rest stop due to rough roads and bouncing. This will probably be different for vehicles with higher raised hitches.

Great product it really helped us when we went camping and it holds perfect 4 bikes. Supper happy with this product and it was very very easy to install