5-Pocket Cell Phone/Tool Holder (Update Version)

This thing is great. Is is a tad on the bulky side but no larger than it needs to be in order to hold a few usefully sized tools. An excellent balance of size and functionality I think. The sides of the cell phone pocket are elastic, and the pocket is deeper than most modern phones are thick, so the pocket nicely conformed to snugly fit my phone despite it being wider than the CLC spec of that pocket. CLC site says approx 2.5"W, my phone case is 2.875"W, and it looks like the pocket would still expand to slightly higher than 3"W. My phone is a HTC EVO 4G LTE w/ 4.7"diag screen which was big before the Note showed up. The pocket would hold my phone with a bulkier case, but maybe not a Note. The height of the pocket is such that the edge of my phone sticks out just enough to not muffle the speaker. My phone is 5.375"H. With the flap closed there is still room for a slightly taller phone. It is also enough room for a headphone cable to easily fit with a right angle plug. A straight plug fits too because of the way the flap is cut narrower at the top but it is marginal on my phone as the flap puts pressure on the plug in a bad way but other phones may fit better. The inside front and back of the pocket have a little padding with a nice soft fabric to go against the screen. The front pocket does not have any elastic, but it is just wide enough to hold side-by-side both a multitool and a 8-pc folding hex key set (with metal frame only, plastic frames were all too bulky to fit). The front pocket is deep enough that I put a stubby bit holder on the bottom of it and the multitool and hex keys fit on top. Total dimensions of what I fit in the front pocket are 2.25"W x 5.5"H x 0.625"D. Either my Leatherman Wave or original SwissTool fit well. In the middle pockets fit a small screw driver, 0.625dia handle 5" total length, could fit up to a 6" length. The other middle pocket I fit a sharpie and a pen, you can fit a third writing utensil in that pocket if you really try but its tight. There is a gap between the two middle pockets, that while not an actual pocket, can also fit a pen or pencil. With my phone and all the tools in there the flap closes to halfway between the minimum and maximum that the Velcro allows, so there is nice adjustability for longer or shorter tools while still keeping the flap snug. The flashlight loop is pretty self-explanatory and tight at the 0.75"dia of my flashlight. Anything wider wouldn't fit. The keyring clip is plastic and probably will break eventually but the fabric loop it attaches at seems solid so that could be easily replaced by a metal keyring clip. The initial reaction from those who have commented on it has been something like "is that an 80s vintage cell phone?" but they are nonetheless impressed when they see inside. I am told it also looks great next to my CLC impact driver holster, I just wish that holster had the belt clip too. A nice product that I am very happy with. If you think it is too big or small there are certainly other options for different phones and more or less tools. For my needs it turned out perfect. Goldilocks likes it too Summary of my kit, loaded pouch is 1 lb 13 oz Phone (HTC EVO 4G LTE) Multitool (Leatherman Wave or SwissTool) 8pc folding hex key set (1"W x 4"H x 0.875"D) Stubby bit holder (1"dia x 1.5"L, in bottom of front pocket) Screwdriver (0.625dia handle 5" total length) Sharpie Pen Pencil Flashlight (0.75"dia) I hope this helps you make a well informed decision on the product either way. Enjoy. Or not.

Ideal para carregar poucas ferramentas e chaves medias

Fits for my EDC multitools

I bought this for walkies that we use at work. While the walkies at work wouldn't have worked so good because it covers the talk button I now use it for my phone, voltage detector, and knife and I still have a spare pocket for something else. Better than any phone case on the market that clips onto a belt in my opinion.

Great product. Super handy. Great price.