ALITOVE WS2811 RGB-IC Addressable LED Light Strip 16.4ft 300LEDs 12V LED Strip Lights Dream Color Programmable LED Pixel Rope Light Waterproof IP65 with 3M VHB Adhesive Back(No Adapter & Controller)

The ALITOVE RGB Addressable LED Strip WS2811 has become my go-to choice for bringing vibrant, customizable illumination to various spaces in my life. Paired with the SP107E controller, this dynamic duo has transformed my golf cart, added a touch of creativity to my wheel insets, and turned my lake house cabana into a mesmerizing spectacle. Here's why this LED strip has earned its spot as my top pick. **Versatile Application (5/5):** Whether it's inside the roof of my golf cart, custom wheel insets, or decorative lighting for my lake house cabana, the ALITOVE RGB Addressable LED Strip proves its versatility. Its adaptability to different settings and surfaces makes it a standout choice for adding a personalized touch to various spaces. **Effortless Installation (5/5):** The 3m adhesive on the back of the strip makes installation a breeze. It adheres securely to surfaces and stays put, ensuring a hassle-free setup process. The simplicity of installation is a major plus, allowing for quick and effective placement in any desired location. **Superior Quality (5/5):** The ALITOVE LED Strip is a testament to quality craftsmanship. The materials used, coupled with careful design, result in a strip that exudes durability and reliability. It withstands the demands of outdoor use on my golf cart and lake house cabana without compromising on performance. **Dazzling Colors (5/5):** The color spectrum this LED strip offers is perfect. **Remarkable Brightness (5/5):** Brightness is where the ALITOVE LED Strip truly shines—literally. The output is impressively bright, ensuring that the illumination makes a bold statement. It's particularly effective in outdoor settings, where the LED strip competes with natural light, holding its own and standing out. **Perfect Pairing with SP107E Controller (5/5):** The synergy between the ALITOVE RGB Addressable LED Strip and the SP107E controller is a match made in lighting heaven. The controller enhances the strip's capabilities, allowing for seamless color transitions, dynamic patterns, and overall customization. The combination unlocks the full potential of these LED lights.

The previous brand that I had got discontinued, and these are exactly what I was looking for. I love the first option, the dream color. Looks great for under the car as well. The adhesive is pretty strong just be sure to wipe the area you plan to put it with alcohol wipes. I used sp110e for the controller only needed 2 of them, for 4 strips.

Good product but have some issues. One strand's connector was wired wrong so i had to adapt on my extension. The colors don't match my rgb control (example- when i set all my dmx lights to red, the strips will be Blue. Haven't found the correct work around yet for that.

I’m using the ALITOVE WS2811 12V addressable RGB strips in my xLights Christmas display with a Kulp32 board, mounted inside PVC to make light arcs, and they’ve worked really well. The strips are bright, the pixels respond smoothly in xLights, and they bend nicely to fit inside the PVC for clean, even arcs. Being 12V WS2811, they’re easy to configure on the Kulp32, and they’ve held up fine outdoors thanks to the IP65 waterproofing. The 3M VHB backing is strong and helps keep them in place during setup. One thing to watch for: The RGB color order may not match what xLights expects right away, so your colors can look “off” (like red showing as green, etc.). It’s an easy fix by changing the color order setting inside xLights, but it’s something to be aware of when you first test them. Pros: Works great with xLights + Kulp32 Bright, smooth color effects – great for PVC arcs 12V WS2811 pixels, easy to configure IP65 waterproof and solid VHB adhesive backing Cons: May need to adjust RGB order in xLights so colors display correctly Overall, very good strips for DIY Christmas light shows, especially for pixel arcs and other props controlled with xLights and a Kulp32.

I use the same brand pixels up on the house. Got these as they come with the stronger adhesive backing. Used a wled controller and played with the patterns.

Bought used, thought I was receiving a full roll, but I received a partial roll, with two separate pieces, one of which had the protector for the adhesive gone. the wires poking out were also cut with some electrical tape around them. "Like new" is not a term I would use for this in any way... UPDATE: Seller reached out to inform me this was an issue with Amazon's refurbishment program, and sent a replacement in a timely manner. Was able to control with a simple Arduino, despite little experience. (worth noting this is 12v, and you will need a separate power supply for the lights)

Worked great for my xmas decorations

TL;DR - Received one strip apparently defective, replacement strip was also defective. No communication from manufacturer, returning and going with another brand. Get what you pay for. Ordered for a project I'm doing in the garage for my stepson (lights behind his Nerf gun wall). Not my first round with WS821* lighting, as I've built a few props and decorations for the house using my own setups (ESP8266, 5V regulator, level shifter, 12V 6A power supplies I salvage from old access control systems (bench tested first, of course). I've used Alitove's 12mm lights and figured the strips would be good for this project (they're being mounted behind a peg board, so I'm not looking for direct lighting). I understood these are 150 LEDs controlled in 3 LED segments with GRB channel order prior to ordering. What I did not expect was to receive a strip defective and get a replacement strip that was also defective. I checked my power output (13V at plug, 12V at output of strip), checked my data line (5V, ground tied from level shift to ground of 12VDC into the LED strip), made sure I had all my components as needed (resistor off level shift, although not needed on WS2811; 1000uf capacitor prior to power input to LED strip, etc) but no dice. I power cycled my controller multiple times however on the first strip I only ever got flashes of light (very brief on initial power up) both on and off the controller. On the second strip, with the controller I initially got the first segment to light up however the strip never responded to commands; after initial power cycle I triple checked my setup (again) and tried power cycling the strip however it would not respond. I tried reaching out to Alitove multiple times to find out if there was a difference in how these strips are connected versus their 12mm version however never received a response. I've waited about 3 weeks now, so the lights go back and I try a different manufacturer.

Thank great as always good lights and very reliable and good price

I cut mine in 2 to use as a replacement. Great quality and should last a long time

It was used to make a framed light board with our grandson.

la guirlande fonctionne malheureusement qu'à moitié, j'ai tout de même acheté une nouvelle guirlande via ce fournisseur et elle fonctionne parfaitement

They are actually BRG .if you plan to use them with the recommended app or you can program the output of your controller they are perfectly fine , bright and adhere reasonably well to the aluminum channel . I needed a second set to replace my stairs side light and a govee strip and it didn't exactly work as expected as colours were not aligned ( green and blue) . I kept them anyway as was able to use them for the stairs controller on one colour. That being said knowing the above limitations I would buy them again for sure to use in an aluminum channel ,they are decent quality and price is good.