Three Bond Liquid Gasket 1194 TB1194

It is the official product, works just like it says it does, and is a necessity if you have an older motorcycle or do much of your own service/repair work. It's one of those things that you just need to have around, you'll find a use for it sooner than you think. Helps to plug small leaks or cracks, it's needed for engine re-assembly, and makes a good glue in a pinch. Sets up quickly, shouldn't be a problem to spread evenly with card paper (i.e. cut off a chunk of the box), a popsicle stick, or small chunk of clean plastic from a milk carton or something similar. Only thing to mention - it goes a long way, and more is NOT better. Use the appropriate amount for good results, and don't put on too much or it just will give you issues. It stays mildly tacky for use bonding/sealing metal to metal surfaces, almost like rubber cement.

Must have if you are splitting the cases on your Harley.Soft set and easy to clean off the case. Anything inside the cases breaks down easily, so there aren't big strips clogging up the breather gear.

The Three Bond 1194 sealer was recommended to afix a solid Copper head gasket in my race engine. This sort of sealer is required to properly seal the head to the block and seal around the passage ways for water and oil. So far so good. My only complaint is that there should be a little instruction on how to apply this thinly and eavenly. The price I paid through Amazon was cheaper than I could get the product on E-Bay. Very pleased with the turnaround service as well... arrived in even shorter time than promised.

When I received my product the number on it was TB 1184. On the back of the packaging it states that this is a interchange for 1194 and 1104.

I found this product to be great and worked as advertised. The 1211 product they offer is also a great value. This product seals up great and has a high heat tolerance. I will definitely buy this again.

goood

Bought this stuff to fix a gasket leak in my car. I purchased some other RTV from Napa that didn't hold at all. Was annoyed to say the least, and someone recommended this to me. 100% the way to go and would recommend to anyone who needs to seal an oil leak.

I just built a Harley Davidson 107 for my 2004 Road King. Had to slit the cases to change out the flywheels so wanted something that I could trust to seal the cases back up with out any leaks. This is the stuff, works awesome and now no worries, sure wouldn't want to have to pull that motor out and disassemble the whole thing just because of a case leak.