SilverStone Technology CP11B-300 300mm (11.8 in.) Ultra Thin 6Gb/s Lateral 90-Degree SATA Cable with Custom Low-Profile Connectors, SST-CP11B-300

This is the only product I could find that allowed me to attach another HDD to a SATA slot located underneath my graphics card the cabel when fitted is lower than the PCIE slot my graphics card lives in. IMPORTANT:- the graphics card requires removal to fit this cable so an earthing strap is advisable for safe removal/re istallation. Using this cable the new hard disk drive was fitted in about 15mins.

Purchased the cable to address a space/clean installation of an internal SSD. Due to the physically thin properties of this cable it seemed to good to be true but it was almost like it was made to measure for my requirement. I haven't checked how well this cable meets SATA cabling specs, my own real world tests show transfers no less than with any other premium SATA cable, so I'm well pleased.

Excellent Sata cable when you are building a SFF pc and for when you have an obstruction over hanging the SATA ports on the motherboard like a GPU. Just what I needed and fitted in perfectly where a standard SATA cable would not fit.

these are great for SFF builds, let me use my ROG STRIX X670E-I in the NR200p Max case l got. the standard sata cables would not fit (I found out the hard way! lol). So these saved me a lot of pain!

Very little room left in the housing once this is installed with the hard drive. Everything worked well.

I was performing some 2.5inch drive swaps on my old NUC7i7DNHE when the unthinkable happened: I cracked the SATA connector. The drive that was in there previously had been untouched since I got the unit... and had fused itself to the cable...The drive's connectors were fine, but I was in a pinch and needed a new connector ASAP to get my server back up. Other vendors make these and sell from the USA (with huge import fees and shipping), and I've also had stuff come in from said vendors that were damaged/crushed/defective. This Silverstone cable was way less money, a little bit longer than the OEM cable, and took up less space. Also qualified for Prime shipping.It came in, I slapped my little NUC back together and hallelujah: she works! Once more: the SATA connection is way less stiff/loose which means swapping the disks shouldn't crack the connectors in the future. In addition the extra length is very very very good, means I can open the unit and move the SATA drive aside while I install parts.Overall if you need a spare NUC cable, look no further. I hope Silverstone keeps investing in NUC and BRIX related equipment as it is a field with few competitors.

Son delgados y permiten un mejor control del cableado dentro del gabinete. Son un poco costosos pero valen la pena. Unico detalle es que cada terminal tiene una etiqueta con el logo Silverstone y que se desprende muy facil pero es mero detalle que se puede pasar por alto.

The tiny custom SATA lead in my Beebox failed due to it being squashed. This lead was the only thing I could find that looked like fitting in the tiny space. Fits and works well

Works well, and I love the way it fits in with my setup.