JFG RACING Motorcycle Dirt Bike Handguards,Universal 7/8" 22mm and 1 1/8" 28mm Handlebar Hand Guards for Snowmobile Bike Motocross MX Enduro Scooter ATV TRX CRF XR CR Hawk 125 230 250 300 450 650- Red

I put these on every bike we have . They have saved my hands and my levers ect so many times .I highly recommend. Very easy to install as well

Good value for the price, especially when you see other handguards going for over $100. The primary downside is that I have tapered bars (2021 KTM 250 XCF) so bracket does not fit as tight as I would like it. I secured the bracket as tight as I could get it but I can still move handguard if I put my weight into it. Worried when I take a fall, the bracket will move with the weight of the bike on it, which will expose the brake/clutch levers. I may have to buy bar brackets with a taper to fix the issue. First fall will tell.It takes some finessing to get everything installed correctly. If you're mechanically inclined, not a problem.

These fit well on a KLR 650 (pictured) and clear around the brake master cylinder and throttle cables. They will protect your hands while riding and protect the levers and throttle when the bike falls over. They are not as good as the more expensive brands, but for the under $30 price range, they are a very good value. Two parts that could be improved: (1) the “universal” clamp to the inner handlebars is large enough to clamp around 1-1/8” bars, but for smaller diameter bars it uses plastic shims to take up the extra space. These do not clamp as securely as the all-metal clamps and will twist somewhat if the handlebars hit the ground. Then you have to straighten them out. Since 90%+ of handlebars are 7/8” diameter, they should provide a clamp for 7/8” bars, and a separate clamp for 1” or 1-1/8” bar.(2) the expanding nut that goes inside the bar end to hold the outer end of hand guard is a little too small for 7/8” steel bars. You have to tighten it a lot to take up the extra slack. A more precise fit here would help secure the guards better.But overall, they work adequately, and for less than $30, they are a very good value.

I know you get what you pay for here, hardware specifically the aluminum brace is nice and sturdy. Plastic shatters on light impact.

The good:Fast shipping. They look good. The way I had to mount them made them sturdy and strong. Like others said I replaced the stock hardware with stronger hardware from the hardware store. I went head on with a Harley and the protected my hands even though my bars got bent.The Bad (really bad):The company claims they are universal and listed my 2022 honda crf300l as a bike the handguards will easily fit onto. Not even close. I had to severely modify every part the handguards came with. I also had to drill and tap my handlebars where the end of the handguards meet the end of handlebars. None of the hardware they shipped me would work. I also had to move some wiring and my throttle cable to get the handguards to fit. As stated the hardware is super cheap and this item comes with no installation directions and no good videos for my bike. The guards sit fairly close to the brake and clutch levers and a few times I grabbed the top of the guard instead of my levers. If you modify everything like I did you will have to deal with a sticky throttle. I did this with a small spacer I made from a skateboard wheel spacer and a couple of washers.If you own a honda crf300l or Rally and are not seriously mechanically inclined or don't have a super nice toolset with multiple thread taps do not buy these. If you do, expect to do some serious modifications, replace all the hardware that came in the box and fabricate some spacers at the end of your handlebars.Next time I will spend 10 more dollars and get a brand specific set of handguards rather than these universal fit ones.

Product is good but mount hardware (bolt &nuts are cheap & break) must replace nuts & bolts don't even attempt to use the ones that come with it mine broke first ride first tree bump or first drop. Good Product when you use good hardware

Good

Can't give 5 stars because hardware was a light wrong. 1 screw was the wrong size. Had to shop at my local hardware store to finish the install. Final install looked like it was made for my Tiger which has 7/8 tapered handlebars. plastic wind deflectors are height adjustable for added wind deflection, but not oversize. Would recommend to a friend.

For my needs these guards hit all the right places, I don't ride single track at my age much so they are sturdy enough for most riding and look good. Fit on my 2022 KLX300 is bang on with my new bar set up. The product got 4 stars because there was a machine bolt missing and I had to drive to 2 different locations to find a proper match. I added a bearing from an old pair of roller hockey skates as a spacer eliminating the need to modify existing levers. Extending the inner bolt and sleeve would give more peace of mind when tightening up the grip end when a spacer is added.

J’ai demandé un remboursement parce que je n’ai reçu aucune quincaillerie, boulons vis et autres pour l’installation. Pourtant ils étaient sur la photo. Extrêmement déçu. Le vendeur n’a jamais répondu à mes courriels.

Hard to figure out at first but once you get it put together loosely it’s easy to installReally easy!Seems like pretty good quality but we’ll have to see after the first wipe outLight weight but sturdy (aluminum)

Good product. Demands a bit a work to get it to fit your bike but they are all like that. That's being said I'm very pleased by the product!

Sa vaut juste 40$ pas plus j'ai retourner l'article