CNC Spoilboard Surfacing Router Bit 1/4 Inch Shank Durable Carbide Tipped by SILIVN - 1 Pack

Overall pretty decent bit I ordered a second one recently, the first one would have lasted longer but I was taking much deeper cuts then I should have been! I'm new to the type of work I'm doing however this is a pretty great not to expensive surfacing bit! I bought a second one and will continue to use my first one that I sharpened on my belt grinder and will use the new one for final passes! Would recommend

For the price, this is a really good value router bit. It left a pretty good surface on hard maple face-grain, but burned slightly on the initial plunge cut. Overall, I think it kept a good edge and will work great in softer woods.

Just used this for the first time yesterday to flatten a 2’x4.5’ maple slab. Worked very well and could handle 1/8” cuts. I chose to do 1/16” cuts to move quicker and have less chatter, but overall happy with the bit. Unlike the cheap $15 one that uxcell sells, this one stays sharp, doesn’t burn the wood, and cuts pretty quickly.

Used this to flatten some large slabs of pine for a 3 piece furniture project. Also some red alder. Cut over 30 bd ft of wood to level rough sawn slabs on both sides, then filled out. Prime day it was <$20

Works well. Used it to take off a lot of material off a lot of boards to flatten them. Tips started to dull so I bought a second one to finish my large project. New one works like a champ.

Really nice product that performs just as advertised. The upcut bit lifts the woods sawdust right up away from the piece you are working on prividing much better visibility and accuracy which is nice. Loce the bit and the features it provides. Supporting a vet is a pleasure and added bonus. Thanks for the five service and prduct.

I have used this bit extensively over the last few weeks, shattered one this morning. To be fair, I use a 1/4" hex drive 18v cordless impact. Just a tad bit hard, held up better than a cheaper version that I had. All in all a good tool.

I’m not fancy, so I don’t have a CNC machine but I did chuck this sucker up in my router and while using a router sled, it made my twisted slab flatter than Frankenstein’s head. I’m impressed with it, especially for the price.

Used this to resurface a large area that I recessed into a length of 200 x 40mm hardwood and made the finish so much better than the 19mm straight bit.

This is the tool you want if you need to smooth and level large areas with your router (such as stripping back spoilboard, or doing a final finish on a large inset area..In the picture, it is still covered in a plastic layer used to protect it during shipping - this layer is easy to remove by hand but would also come off by itself when used - personally I'd hand strip it to limit bits flying around.Very happy with the product and the speed of delivery.

Awesome tool and saves time... recommended 100%