3d Printer With Linear Guide Rail And Directdrive Extruder Large | Desertcart EGYPT
3D Printer with Linear Guide Rail and DirectDrive Extruder,Large Heated (260X310X305mm) Build Plate,Free PLA Filament Sample & 16 GB MicroSD Card Preloaded with Printable 3D Models and Dual Z-Axi
3.8/5
معرّف المنتج: 113012691
معاملة آمنة
يُشترى معًا بشكل متكرر
الوصف
[Linear Guide Rail And Drag Chain Design]: Our large DIY 3d printer adopts the utility model design of “built-in dual-axis linear guide railway” to ensure high speed printing (120mm/s ,layer resolution be 0.1mm )and precision(min 0.05mm layer), And adopts the drag chain to storage wires, so that the appearance is more simple and beautiful
[One-piece Structure And Guaranty:Simple plug and play installation by plugging the gantry into the chassis and assemble it. Quality Assurance/Technical Assistance: Live chat at www.icoolelectronics.com Mon through Fri 6am – 6pm PST | Email at [email protected] | Phone at +86-17688987098 Mon through Fri 6am – 5pm PST.
[Filament Run-out Detection and Resume Print System] When the filament runs out, the printing will be automatically paused to avoid the extruder from continues to work when no feeding. And,when faced with abnormal conditions, such as sudden power failure, the printer would save the print data and paused the printing. Once the power is restore the printing will be resume. When faced with abnormal conditions, such as sudden power failure, the 3d printer would save the print data and paused the pri
[Overheating Protection System And Built-in Fuse] When the temperature reading is abnormal, our large 3d printer will terminate the printing and automatically cuts off the power to your printer. Built-in fuse to protect the 3d printer
[Auto Bed Leveling And Suitable for Special filament]Our 3d printer detects and collects the height data from 9 different points on the hotbed using the metal induction proximity switch, and perfectly controls the distance from the nozzle to the hotbed to 0.1mm. In addition, when the unevenness of the hotbed is less than 1mm, the 3d printer will automatically adjust the height of the nozzle to the corresponding point of the hotbed, thereby solving the annoyance caused by the expansion and cont
الأسئلة الشائعة
ترست بايلوت
الثقة 4.5 | 7300+ مراجعات
يوسف أ.
تجربة رائعة بشكل عام. سأوصي بها للأصدقاء والعائلة.
