ReadyLift 66-1921 2'' Leveling Kit with Tubular Upper Control Arms (Non-Air Ride Equipped)

For the cost, this level kit seems way more robust than some of the other kits out there. The addition of the tubular upper control arm is a leg up against the competition, the ball joint angle at full droop is MUCH better than the stock UCA. Install was easy for someone mechanically inclined but is absolutely doable for someone with little experience. Only hiccup during install was that the studs on the factory strut were about 1/8 inch too long and had to trim the studs down with a dremel. Overall this kit really changed the look of my truck and gave it the stance I wanted and the clearance to run 35x12.5 tires.

Easy to install and no issues yet after 1 month of use. Truck looks and handles great!

Straight forward installation. Will need 6 ton jack stands to get high enough, torque wrench to at least 150’lbs and wrenches up to 15/16. Installed on 2020 Rebel with 1.5” pucks as shown in the back. Gave me approximately 1.75” instead of 2” but may be the fact I raised the aft also. Like the taller stance more like the power wagon giving a little more approach and departure angles and makes up for the loss of clearance from running board/ side rails.

I went through 2 of these and both got sent back because of leaking seal grease. Also these are terrible for anyone who gets snow. The part with the grease zerk is is sunk down lower than the rest of the unit so salt and water and anything else is going to sit in that cup and eventually damage it. They do not come with or sell a protective cap for this which is ridiculous for the premium price you pay

Easy to install... Just watched a couple YouTube videos. Only issue I had was the hole drilled in the ball joint for the castle nut was too low. I had to use about 1/4 inch of washer for the cotter pin to go through but.

Best price out there on Amazon. Installed on my 2019 Ram Rebel today. Had installed, but went pretty fast, about two hours. Took it for alignment afterwards and the tech said it was just barely off. Once aligned, it drives perfect and feels great. The lift is perfect. The front looks pretty even with the rear and is plenty tall for me. The tech at the alignment shop said the upper control arms in this kit are bulletproof and a nice improvement over the high density plastic ones from the factory.

Leveled out the truck perfectly and ride is unchanged which is what I was looking for with this setup. Quality material. Spacer is one solid piece and the upper control arms are heavy duty and corrected the angel. Had it professionally installed for peace of like took the shop about a hour

Easy to Install for a competent mechanic. Leveled my truck the way it should have been from the factory (2020 Rebel). Rides just like factory, maybe even a little better. A great price through Amazon

The installer said they were very impressed with how little ( almost no) change in alignment after installation. Indicating a good kit. However it rubs in reverse with 35’s.Also with 35’s Look wise I’d recommend a 3.5” lift at least. Should be fine with 33’s.

I love this kit, maintains the factory ride while giving my 2020 ram rebel the stance it needed from factory. Install was easy and high quality parts.

Installed in 2.5 hours happy with the results. I ended up using the Moto fab pucks for extra lift. I’d highly recommend this!!

Excellent quality, leveled my 2019 Ram Rebel, looks way better, no more rake. Installed by dealer followed by alignment. Definite recommend.

meilleure hauteur. la c'est un vrai truck. très heureux merci ready lift