Industrial Blue Water Pump, 0.5HP, Copper & Brass, 40L/min Flow, 7m Suction, 240V

Good buy ,be careful to order the right adapters though

Good product for my garden irrigation system.

The media could not be loaded. I followed the installation instructions to a T.Even though I was only pumping about 30cm in height it wouldn't pump.I also noticed the cable retaining clip was loose, so decided to tighten it myself.On opening the top, which was loose, I also noticed the retaining clip was broken.See attached photos.

Used for garden watering, good delivery and better than expected delivery.

This is a case of you get what you pay for.It works fine.It definitely needs priming, won’t self prime at all (it doesn’t claim to). I didn’t prime it initially and motor strains and doesn’t spin. For my application pump was placed lower than water level, so priming was easy, connect to inlet, and let gravity push water out of top.It pumped water along 50m of standard garden hose (need adaptors to connect it to bsp fitting) and a height gain of about 2mAs other reviewers have noted, it rusts. After a period of not using, priming again spewed some rusty water.It had also seized, but I took off the impeller housing, ran it and it freed, and then worked ok again with housing back on

Bought this pump for a filtration system for a hot tub, ended up seeing the water turn brown with rust. The pump housing is untreated mild steel which is rusting on the inside. Definitely not suitable for fresh water / pond / filtration system. I see a couple people saying they are using as a fresh water boost pump - most definitely do not drink water that had come out of this thing

I use the pump for water harvesting and is swich on and off twice a day and so far has beenvery good. regards bob.

I liked the water pump because it was the size that I wanted