Description: - Infrared remote control to achieve the function of home appliances switch to replace the manual switch; wide applications, simple wiring, convenient - The maximum drive power of 800W or less, can drive most of the small household appliances and electrical appliances - Module type: learning type (you can learn all NEC format infrared remote control, other formats do not support) all the working current does not exceed 80mA (power-down automatically save the set mode) - Working mode: self-locking, jogging, interlocking three modes of free switching - Widely Used: Home appliances switch, lighting switch, wireless control products, switches, intelligent switches and other electronic equipmentSpecification: - Material: FR4 Board - Color: As picture show - Size: Approx. 60x40x21cm/23.62x15.75x8.27inchPackage Includes:1 piece Relay Module Board1 piece 3 Key Remote Control SwitchNote:Pls allow an error of 1-3mm due to the difference of manual measurement.
A**R
You have to program it, see review
No instructions. Could only get it to operate in latched mode, relay 1 or relay 2. Not both. There are three buttons on the board, s1,s2,s3. S1 learns relay1 code, S2 learns relay2 code, S3 learns the power button code. This is the way I set it up. You can assign any of the buttons to any remote button, a Sony tv remote worked also. I could not figure out how to energize both relays at the same time. I could not figure out jog. So, ch1 on remote relay 1, ch2 on remote relay 2, turning off relay1, power button turns off either relay. I spent more time on this review then trying to get this module to work as described. Press and release a button then hold a remote button, a led between relays blinks 4 times. That button has learned the remote button code.
ترست بايلوت
منذ يوم واحد
منذ 4 أيام
