Eco-Fused 2mm Double-Sided Adhesive Sticker Tape - for Smartphone, Tablet, PC, Laptops, LCD, Digitizer, Small Electronic Repair - Includes Pair of Tweezers, Microfiber Cleaning Cloth

Good for when I was repairing my cell. It was stolen from me while I was working at Walmart

For the repairs I do on iPads and phones and electronics and I got to have something to stick this stuff is pretty darn good and I've used a lot of other brands

The media could not be loaded. TLDR; This is the proper product for sealing new cellphone screens into place or back covers. It works very well and is comparable to factory adhesive. I repair many diverse devices and when used properly this product does not fail and works very well even over long periods of time. Proper usage is a bit tedious, remember not to touch either side with bare hands or dirty surfaces, use tweezers and a clean work space. Properly wipe down all services you plan to adhere against with isopropyl alcohol and dry before using. Cleaning and drying surfaces is a necessary step. This product includes a large amount of adhesive tape suitable for an (estimated) 20-25 cellphone repairs.Extended: The product is well packaged and protected with a resealable bag. The sides of the tape should not be exposed to dust so it comes with some white "wax paper" covers. This tape is very thin as it should be and is ideal for electronics repairs, particularly cellphone screen replacements and small component adhesion such as battery adhesion strips in mobile phones. There is a pair of fine tweezers included which absolutely come in handy.When properly used this product works very well. Many people who mentioned "failure" often touch the product with their hands when applying it and thus contaminate the sticky surface with oils. Another common mistake is to touch this against another surface accidentally or work in a very dusty environment. The tape is thin as it should be and thus surface area is small, any contamination will greatly affect performance.Also be sure to fully clean both surfaces with isopropyl alcohol. The surfaces you plan to adhere together with this need to be cleaned, even if they look clean already. They also need to fully dry (you can use compressed air to ensure this, alcohol dries very fast anyway). Never wipe surfaces with anything other than the lint free cloth included in this kit (or a brand new equivalent).If you do everything right as mentioned above the results will be great. I've used this exact product many times and never had any issue. Another huge advantage is that it behaves like factory double sided tape when attempting removal which means if the device needs to be repaired later (it will, if it broke once it will break again) then you will be able to easily reopen the device. I tested this with my usual repair methods via a heat gun to loosen the adhesive and it works very well with this tape.As a final tip, remember to place the circular protective covers back over the tape on both sides and store it in the original resealable bag when done. Do not leave it out on a desk or anywhere else as dust and other pollutants in the air can ruin the effectiveness of this product.

This was my first experience replacing a screen/digitizer on a cell phone; however, I am an EE student so have experience with other electronic devices/repairs. While other brands got good reviews, this was the only one that was black, the same color as the original tape. I doubt that makes it any better quality, but since the phone was black I didn't want to risk seeing any white trim around the screen.While prepping the phone (Motorola Electrify M), I kept thinking this tape better be strong. The outside edges were roughly 1mm wide, so no much surface area to stick to. The top and bottom though had ample area. But this didn't disappoint! In fact, it's so sticky that it was difficult to move if I happened to lay it down correctly. The tweezers came in extremely handy for applying it too. Trust me, if you decide to go with another brand...you better pick some up, it was almost essential I used them.Took me about 20 min to lay out all the tape. Some areas were much wider, so I just laid down 2-3 strips side-by-side. I didn't do a 100% cover, but got most of it. The edges only need about 1mm, but rather than cut it I just folded the excess over. Worked fine. I also used the tape to fasten down other areas where tape got damaged when taking it apart.Once done, the screen held fast and secure. I shook it around and even tried to ply it up a little. It obviously started to come up (which is how I got the original screen off), but it gave ample/acceptable resistance. I'm sure it will strengthen a little over time too.The tweezers were also a great bonus. As another said, they're very sturdy and not cheap. The only drawback was the uncoated bare ends are not very smoothe. They had little jagged edges that could easily snag, but I just smoothed it out with some 220 grit sand paper. I'm sure they were added to the cost since most other brands were ~$3 roll, but as I said before, you're going to need them anyway.

La cinta pega bien, cumple con su función. No me gustó la calidad de la pinza ya que se dobló facilmente cuando lo usé.

not very sticky, had to use super glue to help at the end

This is exactly what you need if you're working on a newer phone or piece of electronics that uses adhesive to bind parts together. Important to notes is that you should remove the old adhesive if you're going to apply new so that you don't affect the size as much as you would otherwise.Cell phone manufacturers usually use custom cut tape pieces that perfectly fit every area that they need to go, but for the DIYer you need something that you can mold and shape to get into the right position (I used the points of tweezers and the tip of a knife for this). Be careful not to overlap pieces or you'll increase depth, but overall, this product works well. It's holding my phone together right now.The included tweezers aren't great, but aren't bad. I found I needed two pairs to really hold and manipulate the tape (2mm is really small, that's the width of the tape, by the way) and the included ones are better than some precision ones I've used, but shouldn't be used for anything other than the tape as they're not very strong at the tips.I had to remove the pieces I had taped to do further repairs later, and it came apart just like the manufacturer's adhesive, but didn't shred as badly which means that I didn't have to reapply it for reassembly, which I like.Overall though, if you're looking to fix your phone, this is what you need. I love it and would buy it again.

I fix phones and this has been useful. Highly recommend.