Draw-Tite 76194 Class 4 Trailer Hitch, 2 Inch Square Receiver, Compatible with 2016-2025 Volvo XC90 and 2018-2025 Volvo XC60

Perfect fit for my Nissan 2500HD! Simple to install. Looks good too. Nicely painted and sturdy.

Great product and install instructions! Fit perfectly on my 2016 Colorado WT.NOTE: The actual install time would have taken me about 5 hours if I were trying to do it like the average DYI person. Certainly NOT the hitch's fault that the bolts were incredibly hard to take off the truck then equally hard to get back on. The hitch holes were right where they needed to be. I needed my friend's repair shop, lift, and pneumatic tools to get the job done in a reasonable time.

Fit perfectly on a 2025 Grand Cherokee. I can’t stress the importance of watching videos on how to install. It was a solid 3 hour install including fishing the wire harness.

Ok so I have a 2015 chevy colorado wt 4x4 that came with a bumper hitch. I needed to change ball size often for different trailers and so i decided to go with the receiver hitch to make that easier. The hitch fit good and was good quality.Tips - There are 8 big bolts and 2 small bolts holding the bumper and old hitch on. these will be rusted badly and you will need a long ratchet and a 21 millimeter socket for the 8 large bolts and the little ones are like a 12 or 13 mm. you should spray these through a hole in the frame area inside the rail to help with removal. These are in an area that is hard to access with a impact and they are extremely tight. they use some thread locker on them so hit them with a torch to free that up or it will be a tough battle. the 4 large bolts on the bottom were easy to remove with the large impact. the 2 center bolts have clips that will need to be put on the new piece. the old hitch ball has to come out before the bumper will come off.be sure to remove the wires that are attached to the bumper before removal. i used zip ties to reattach the wiring. i used a 3 foot 1" drive breaker bar to loosen these big bolts so get ready for some physical work if you tackle this yourself. Good luck

Hitch appears to be built solid with good hefty to it. Install looks to be straight forward, paint/ coating looks well done also.

worked out great been using for years now

This is a nice heavy duty trailer hitch with a capacity greater than the vehicle's towing capacity. It installed with no problem. But you do have to remove the rear bumper which is no simple task.

Fit great and stays totally hidden behind the basic bumper cover on the Durango.