Behringer FCB1010 MIDI Footcontroller

Works well with mac mini m2, logic pro x, midi guitar 2/3 and Kontakt 7

古いシンセ(DX7Ⅱ)のプリセットボタンが効かないところが数か所出てきたため、修理に出すか悩んだ挙句、これを購入。MIDIケーブルで接続するだけですべての音色呼び出しが可能になりました。おまけでエクスプレッション機能もついた。機能については満点です。値段がもう少し安かったらよかったので星4つ

This pedal does exactly what it says it will. I wanted to change to rack mounted effects and began by changing patches manually. The FCB1010 was recommended to me by a friend and has since been recommended to friends by me. It is a solid unit that has so far stood up well to live use and i see no reason to doubt it will last a long time. Programming is quick and easy and can be mostly be done standing or sitting. I say mostly because some of the global parameters require switching on the unit while holding a pedal down. It can control up to 5 midi units although i am only using it for 4 and the expression pedals can be set up to do pretty much anything that can be controlled by midi. There are also 2 1/4" sockets which can be used in place of normal "on/off" type pedals for things like bypass. They can be set to operate in several different modes although i dont use them, instead i have set a "bypass" patch. My only criticism is the size. It is a very long unit and that will be a deciding factor for some. For me it isnt a problem. All in all a great unit, well worth the price and should last for a very long time

I had read the reviews and knew what I was getting in to when I purchased this controller: it was going to be a crash course in MIDI programming and difficult for a beginner. Also, that this board is inexpensive, comparably, for all of the features you get. What I didn't know is that the stock firmware works just fine for my application, which is Ableton Live 9 and multiple guitar VST's. I ordered this board here, on 8-31-2015, I received the new model with stock FCB1010 Firmware version 2.5.1e, as confirmed by the free PC utility, FCBEditor. I spent a lot of time looking at the UnO and Eureka eproms. I may still get one of those at some point but, for now I've been able to get Guitar Rig 5 and Overloud TH2 working perfectly, with stock FCB firmware, Ableton Live 9 and with a Scarlett Focusrite 6i6 controller. Here is a must have utility for PC users: this free utility will allow you to program your FCB1010 without all of the pedal pushing on the board itself: http://host.mtnsys.com:81/faq-fcb/PCEditorBeta.htm - If that link is not working, search for - PC Editor FCB1010. It is pointless to try and program the FCB1010 from the pedals, when this utility gets it done much easier and faster. I use this with Windows 7 x64 and can't speak for other OS's. It's good to have two MIDI cables, in/out, for programming. Buy two if you have none, as the FCB1010 doesn't come with any. If you can't get the FCB1010 working with your VST's in Ableton: 1. Insert a blank MIDI track 2. Set the input of the MIDI track to the MIDI receiver for your FCB1010 - in my case Scarlett Focusrite 6i6 3. Set the output of the MIDI track to the separate audio track that contains the guitar VST you want to pass MIDI control to - in my case Guitar Rig 5 4. Set the MIDI track to IN - not Auto or OFF 5. Make sure the track that contains your VST audio track is armed/record lit up on track - Guitar Rig 5 track, record button lit 6. Tap dance your way through 100 amps - 10 banks*10 presets There are multiple youtube videos that will help you figure out assigning the expression pedals.CC# 7 for volume and CC#11 for wah is pretty standard. I'm not going to say this was an easy task, it took me 15+ hours to get things right, mostly because of old and outdated info and software out there on the web, but this was a very rewarding experience. I learned a lot that can be applied in many different ways. There are also a lot of useful mods out there, like powering the FCB1010 over the same MIDI cable, so you can have just one cable running to this board. And some more: https://www.youtube.com/watch?v=8m0v3Rr6f4U If you like a challenge and the satisfaction of being able to control any part of your VST's or DAW with your feet, you need the FCB1010.

La estoy ocupando con un tecladokorg oa700 y esta genial, ahora los cambios de fills los hago con el pie y no me distraigoaltocar en vivo. Genial