Yellow Fog Lights,3 Inch SAE Fog Lights with Cut-Off Line, IP67 Waterproof Street Legal Amber Fog Lights Offroad Fits for Wrangler Bronco Trucks Tacoma Tundra F150 Ranger UTV

Overall, a nice package. This is a really nice well thought out kit. No instructions but pretty straight forward. Installed on a 2002 Jeep Wrangler. The battery is over on the passengers side and I wanted the switch to the left of the steering wheel. The cable just made it. I could have moved the relay to the firewall and had more length but it worked out fine. Plan locations for everything and you will be fine. I bundled an excess 3 feet or so of excess cabling to the lights under the fuse box so there should be plenty for other applications. A mounting bracket for the switch would have been nice. Very bright and a nice sharp cut off at the top of the illumination so they can be aimed high enough to really light the way with out blinding on coming drivers. Very happy with this choice.

Installed these on my aftermarket bumper for my Jeep Mojave. These are very bright and have a sharp cut off line. The 6500k color matches perfect with my head lights and they have a nice powder coating to the housing. The wiring harness made wiring a simp and kept things factory!

First, I have doubts about the claimed DOT approval of these lights. As I understand it, it should say DOT on the lens, but as you can see, even in their ad, it does not.Second, one of the two is already letting moisture in after being installed less than 6 months. Currently unavailable on Amazon, leading to serious doubts about the vendor and quality of this product.

I've had some expensive incandescent fogs over the years (cibie, hella, etc) and these are hands-down the best I've used. Bright, wide-but-thin beam pattern with sharp upper and lower cutoffs. The installation was a breeze after I found a good spot for them, and the included wiring harness and switch worked great.Two weeks after installing, I had some moisture inside one lens. The seller sent me a replacement pair (arrived 3 days later) and things are perfect now. The design is really simple with very few opportunities for water to get in. If you're so inclined, it's simple enough to pop the lens off the front (six small allen bolts) and smear some silicone RTV around the gasket to ensure things are sealed up tight.

As indicated by others the seals are some what poor although the lights are otherwise good.The seal hex bolts on mine arrived loose which would have let water in. As suggested applying silicon is easy and will likely fix the issues.However the seal problem should have been fixed from the factory and should never be up to the purchaser.

Looks and works great

After only 20 days water started coming in.I contacted Customer Support and they didn’t want to replace it. 👎👎👎