AIMADI Pull Down Kitchen Faucet with Sprayer,Commercial Single Handle Stainless Steel Brushed Nickel Kitchen Sink Faucet with LED Light

This faucet was one of the easiest to install of any faucet I have installed because it uses easy to tighten screws to secure it to the sink instead of having to tighten nuts in a small space with a tap wrench. It reaches out a bit further into the sink than most other brands I looked at, which is helpful with my double sink because I can wash closer to the center of the sinks instead of in the corner by the faucet with a short reach faucet. Each water outlet on the faucet has its own shutoff. If you have cats that play in or near the sink and worry about them hitting the handle and turning on the water when you are not home, the shutoffs at the water outlets keep the water from running if the cat hits the lever by the sink. The faucet has stainless where a lot of others had rubber grips. Stainless is more durable and easier to clean.

Love it! Looks great, works great...

So the light is cool. Unnecessary, but cool. Something else to talk about this holiday when the family comes over and asks what's going on with our sink. More importantly, this has the look and feel of a faucet that you would think should cost at least twice as much. The pot-filler arm swings freely behind the spray arm so that you can move one without worrying about hitting the other. Even though it is short, it just reaches the corner of the second sink, so you can fill that one without having to use the sprayer. Pressure is fantastic compared to the unit we replaced, even after running the water full-hot for extended periods. Presume this has washerless valves, because there is a very positive feel to the off/on with none of the "squishiness" you get from a rubber washer valve.The spray arm detaches easily from its holder, and has a locking mechanism for hands-free operation if you want to fill both sinks at once while you do something else. Even with both spigots running, there was only about a 20% decrease in flow. If you have ever worked in a restaurant, you will recognize the sprayer mechanism. It is easy to operate with one hand, and the tension on the flexible spring (which returns the sprayer to its holder) is perfect.As for installation, I agree with the reviewer who advised assembling the supply tubes to your plumbing before mounting the faucet. We replaced some of the under-the-sink copper pipe with PEX tubing which we pre-fit to the faucet, then joined to the copper with sharkbite shutoffs. Simple, easy, reliable, and well worth the expense and effort.

We bought this for kitchen faucet in our new build. Overall simple install. Size and proportion are perfect for our sink and space. Great industrial look for our farmhouse at a fraction of the name brands prices. We’ve had it about a year now. A few minor issues: 1. the base seems to keep coming loose and pivoting every time we turn the faucet.no matter how much we tighten the screw Pretty simple fix; added additional plumbers putty under base and used clear silicone around the base to hold in place. 2. The led just started malfunctioning and only flashes red all the time when using. Minor details. We may try to take it off and soak in descaler. Or just find and order a stainless steel piece to replace it.

Really awesome product and the sensor makes the sink hands free!

I brought this faucet based on the positive reviews and it looks great in my kitchen. However, I loved the LED lights changing from cold (blue), warm (green) to hot (red) but after less than a year those lights no longer work. Very disappointed about the lighting but functionality usage is still great, the price is decent, and it looks good.

Although we were a bit skeptical we bought this based upon all of the positive Amazon reviews. Although it's too early to know how it will hold up long term, our initial perception on the quality and aesthetics of this faucet is that it is a high quality faucet that rivals name brand products costing 4-5 times more. It looks beautiful, feels solid, and the water pressure is improved vs the American Standard it replaced. My wife loves it! The color change on water temperature does work but for us that's more of a gimmick rather than a needed feature. The install instructions are a little lacking, which is why I docked a star on "Easy To Install". In fairness it is easy to install if you know basic plumbing. It took me less than an hour to remove the existing single hole faucet and install this faucet in a granite countertop. The advice from prior reviewers to pre-install the braided water hoses onto to faucet taking note from the instruction drawing which is HOT and COLD before dropping in the faucet was a must for our install. Also, the accessories section of the instructions refer to an O-Ring, Rubber washer, Nut, and Screw Cap. However there is also a metal washer that's not listed but included and is depicted in a later illustration. I'll summarize the sequence below for anyone who'd like a little extra guidance, but to sum up we are really happy with this purchase and if it would have had a name brand on it we would have not thought twice about it costing a lot more.You may find the following install info useful. I'm going to use the part names and (numbers) provided in the instructions:1. Insert the black O-Ring (2) into the groove on the bottom of the Faucet (1)2. Hand tighten the HOT and Cold Hoses (6) onto the Faucet (1). Do your twisting/threading of each hose as close to the faucet base as possible. Note: the illustration in Step 4 of the instructions indicates which hole the HOT and COLD should be threaded to.3. Drop the hoses through and thread the brass Nut (4) onto the Faucet base (1) The shorter thread section is towards the faucet. Hand tighten.4. Carefully drop the faucet into place through the opening in your countertop or sink hole taking care to have the O-ring on the bottom of the faucet sit so that it is centered over the hole. I'd recommend you have someone else to hold the faucet in place at this point until the install is finished so it doesn't shift.5. From underneath the sink first slip the clear Rubber Washer (3), followed by the brass Washer (no part #) onto the threaded brass Nut (4) and then screw on the Screw Cap (5) taking care not to over tighten it. Tighten the two set screws on the Screw Cap (5) but don't over tighten. Attach the braided hoses to your HOT and Cold water supply lines.

El monomando no trae LED como especificado en el anuncio

Very disappointing, was initially very pleased with the tap. Couple of months later the LED stopped working and I noticed water leaking with a tiny hole in the arm of the tap causing limescale, found it very odd, how’s that possible and now I have seen a few more and am very concerned. Tried to see if I can reach out and get it repaired but there’s no option. Writing here in the hope that someone can help.

Es handelt sich nicht um eine handelsübliche Anschlussgrösse für Deutschland…?? Wie kann ich die Armatur anschließen ??

I love the look and functionality. Easy to use, the sprayer is great and the colours it turns when hot or cold is cool. I’d recommend this tap.

Looks and works great! Easy Install!