3D Printing 3D Printer Adhesive for Adhesion to Heated Print Bed, Spray, 400 ml 13.52 fl oz

This stuff is great, better than nano polymer adhesive and cheaper too, though I would recommend waiting for this to go on sale if you can. Unlike what some have claimed this isn't just relabeled hairspray, It has better adhesion than hairspray, and unlike hairspray it doesn't degrade even at 120C bed temps. This is the first adhesive that I've tried that works well on bare steel, so no more destroying buildtak/pei/glass beds with prints that stick too well to the build surface. It does need some help with larger ABS and PC prints, I use ABS slurry in addition to this adhesive which entirely prevents warping at the cost of ease of removal.If you're just printing PLA parts, they hold well, come right off when the bed cools and the adhesive lasts for quite a few prints before needing to be reapplied. I haven't used it much PETG, frankly I find it more annoying to print than ABS, but the two prints I have done with PETG have stuck well and released easily when the bed cooled.

This spray works absolutely fantastic on a glass bed! I print with ASA a lot and you can;t use the regular bed because of the high temperature which makes it warp. I tried the glue stick on glass. Does not work at all for me. I also tried a number of other adhesives and they all failed. But this stuff works perfectly. Holds the print in place and lets go when it cools off. You have to try this product if you have adhesion problems. Totally worth it.

This legit solved all my bed adhesion issues... I had tried everything, every brand of glue stick, every brand of hair spray. One of the youtubers I follow reccomended this glue to me and it works so well. Ive been using it for months and haven't had a single print fail due to adhesion. Once the plate is cooled the print will pop right off which is great because a lot of glues I've tried ended up damaging my build plate because I'd have to scrape the parts off even once cooled.

I've used a dozen different adhesives and this one works as well as any, but it much more user friendly. Spray it on a clean plate and you're set. I do but it on sale for $12-15 and it's worth every penny. Super easy and works very well.

A great spray for print bed adhesion. I no longer have to fiddle with bed and print temp when using this. Plate cleans easily with a little dish soap. It has made a big difference with finicky prints. I can usually print 3 or 4 projects before I wash and spray the plate again.

The media could not be loaded. So I stopped 3d printing about 3 years ago, recently I got rid of my printers and got some new flashforges. After a while and a ton of prints, I started to use the flashforge adhesive and it was terrible, nothing would stick, it always left some type of film was left like oilish. So today as of about 2 hours ago I found my old can of 3DLAC from 2022 that I bought from here on Amazon and decided to give my 3 year old spray a try and let me tell you it still works flawlessly, I don't even know why I didn't try finding it in the first place, now prints are coming out very nice all thanks to the little adhesion I needed from 3 YEAR OLD SPRAY THAT WAS HALF USED and still worked!!! Love this stuff and just bought 2 more cans.

Love it. fast, easier than glue. So far no prints detached after +50 times used. I don't always wash plate between uses and no detachments. Strong odor for a few seconds, need to let plate cool once done, otherwise hard to get piece off. havent burned through a bottle yet despite +50 prints including tall and thin prints.

Good adhesive. Works great.