TOCOL 2+2 Pack Fit for Samsung Galaxy S10 Plus - 2 Pack TPU Screen Protector and 2 Pack Camera Lens Protector, Alignment Frame, Easy Installation, Bubble Free, Support Ultrasonic Fingerprint

Great product and great customer service

Good

Good product, but a bit tough to install.

Good quality

Wasn't sure at first... But this protector works well. When I first put on the screen protector, there were a lot of bubbles. I did my best to try and push them out with the little card they give you for pushing out bubbles. There were still so many bubbles! I figured I did something wrong so I used the other screen protector it came with. Followed the video again and more bubbles! I tried to get them out again and I got a few out but I ended up just giving up. 2 days later... A lot of or l the bubbles were gone on there own. I've now had it a week... All the bubbles are completely gone and the protector looks great! I also get a great response from the screen with this thing and no issues with finger print reader. Really happy with how this turned out.So, take my advice, just wait and let the bubbles go out on their own, they will go away I promise!

I found three major issues with this screen protector. First, in my opinion, the design is inherently flawed. The S10e has a flat screen with a slim black border around the portion of the screen that displays graphics. This screen protector is only designed to cover the portion of the screen inside that border, not the entire glass front of the phone, leaving a 2mm gap of exposed glass between the screen protector and my phone case. Not only does this leave a breakable portion of glass exposed, I already notice dust and dirt collecting in this gap after only a couple days use.Second, even considering the screen protector is only designed to cover the display portion of the screen, it still doesn't fit properly even when using the provided alignment tray. With the screen protector perfectly aligned with the right side of the display portion of my screen, there is a very slight (less than 1 mm) gap on the left side where the screen protector doesn't quite cover the full screen. This may not sound like much, but it causes just enough distortion at the edge of the display that it's driving me crazy. Oddly enough, it's also too long. With the top of the screen protector perfectly aligned with the top of the display area, the screen protector extends an extra 1 mm below the display area into the border. This is not due to an installation error; the screen protector is too narrow and too long for the screen.Third, installation was not easy. I had to practically smash my finger through the glass to smooth out the air bubbles. I finally got rid of the large bubbles, but there are still a few small bubbles around the edge of the screen that I can't smooth out. In my experience, this is very common with most screen protectors, but I was surprised considering how many very positive reviews there were for this product.Overall very displeased. I'll be ordering a new screen protector from another manufacturer. One that actually covers the whole glass screen!

I've used the Armorsuit film protectors on previous phones, thought I'd try a tempered glass protector this time (Samsung S10e). I was expecting the installation to be a little tricky, and it is! Nothing specific to Tocol, screen protectors are just hard to install. First try I made the mistake of doing it in the kitchen - too dusty! Even though I was careful with setup & cleaning, several specks of dust were trapped under the protector. Once that happens, the protector can't be reused as it has a sticky back and there's no way to get the dust off it. 2nd try was in the bathroom after taking a shower and spritzing the air over the counter, then waiting for things to settle out. Much better! However still not 100%, there's one dust mote under the screen which I'll just have to live with. Also had some trouble getting all the air bubbles out. I had to pry up the edge carefully and squeegee them out. Film protectors are slightly permeable so the last tiny bubbles disappear over a day or two; this won't happen with glass. The other issue is that one edge just won't quite stick down. Another minor issue with flat glass protectors (again not Tocol's fault) is that the S10e's screen edges are slightly curved, so the protector is slightly undersized to cover just the flat area. This leaves a visible gap between the protector and the phone's case. But the main issue is the pale line down one side where the protector's edge hasn't quite adhered.Tocol should add to their instructions that you need to install the protector in a completely dust free zone, and that you really only get one chance to lay it down. If you have to pry it up to release bubbles there's the risk of the edge not adhering properly. I'm really glad Tocol gives you 3 protectors! Now that I've used 2 of them I don't dare try again right away. I do live in a very dry, dusty environment (Arizona), and it's been a very dry summer. I may try again with the last protector in the winter when it won't be as dusty. At least the price is good so it's not a huge loss!UPDATE 9/4/20I contacted Tocol about the edge not sticking down, and they promptly offered me a refund, which I accepted. So 5 stars for customer service!I think I know why one edge isn't sticking - the protector is very slightly misaligned. As another reviewer commented, the installation guide frame is slightly larger than the protector. You need to center the protector within the frame; I can see from the selfie camera hole that mine is just off center. I think the S10e screen curvature is enough to prevent the edge of the protector sticking because of this.After living with the protector on for a week I mostly don't notice either the trapped dust speck or the unstuck edge, but I do notice the "frame" effect of the gap between the protector and the case, about 1mm all the way around. The thickness of the protector and low edges of the case also make the glass surface just about flush with the edge of the case, which I also don't like. None of this is Tocol's fault, just my personal preference, but I think I'll eventually switch to a thinner film style protector.UPDATE 9/18/20I got my wireless charger! There was an insert in the box that said, if I write a review here and fill in the form with a screenshot on Tocol's website, they'd send me a wireless charger. There was also the small print saying it's only for early customers, and given that this is a previous generation phone I wasn't really expecting to get anything. But I got an email saying it was on the way, and it arrived today! And it's great, circular and very thin like a thin coaster. Works perfectly. Thanks Tocol!I have to say that after a few weeks, this glass screen protector is not for me, sadly. Nothing to do with Tocol, I just don't really like it - too slippery and I dislike the small gap between the protector and the case, crumbs get trapped in it and I keep feeling the edge when dragging there. Not Tocol's fault, all of these case friendly glass protectors are like this. I just personally prefer the thinner self-healing film style, which are also more scratch resistant than glass. Still, good to have tried it and top marks to Tocol for their customer support.

Great product