FlantorGarden Irrigation System,50ft 3/8" & 50ft 1/4" Irrigation System Blank Distribution Tubing Watering Drip Kit/Irrigation Kits Automatic Mist Irrigation Equipment Set for Garden,Flower Bed,Lawn

Good price and they work.Two complaints:1) Sometimes the 1/4" barbs don't hold so I had to use wire-tires to hold hose on.2) There's no 3/8" TEE so, if you want to run it in two different directions, you have to make a trip to Home Depot.

Very good product, very easy to install even in small area

This product kit is fairly complete and comes with vvarious drip emmiters and tubing. To make a connection between tubing and drip heads, the tubing must be softened with a dip for a minute or two in hot water. A presure reducer should be considered to avoid busted water connections / depending on line pressure at the hose bib.

Great product , I am a repeat purchaser, I use it for flower beads and my garden. Precision watering at its best and its quick and easy to install

The two sizes of tubing (1/4 and 3/8 inches) are perfect of the garden areas that I wanted to irrigate in the yard. The joints that connect from 3/8 to 1/4 tubing have really good fit and easy to install. One major complaint is the quick connector. It is really flimsy and none of the connector attachments are made for the standard 3/4 inch hose/spigot common in the US... Luckily, I had a 5/8 inch garden hose fitting to 3/4 female, which I inserted into the rubber universal connector that came in the kit....

If you have done pneumatic control connections this is just the same. Make sure your connections are pushed all the way on

I bought this for my 5 gallon bucket garden. I've got 5 emitters installed per instructions, one per bucket. It wasn't too difficult to setup.I got everything put together, and turned on the water. Had a leak on the garden hose adapter, needed to tighten a little bit more. There aren't too many threads to get a good grip, although I think there is some teflon tape included (hand tightening a little bit more did the trick). Let it run for a few minutes, was satisfied with how everything installed.I put the system on a timer, thought I'd be good to go with watering this summer. Well, today I looked outside while the timer was going, and I had a spray of water about 20 feet from one point on the system. The emitter tubing popped off from the T. I didn't think my water pressure was particularly high. Interestingly enough when I pressed it back together and tested again, it took several seconds after the timer turned on before another popped off (It wasn't the initial surge of water that did it).I suspect the sun heating the tubing made it soft and unable to hold. I will have to figure out a way to keep this together, maybe small zip ties for extra clamping pressure? There isn't much space on the barb for the T. I need to put more engineering into my system, your mileage may vary.

This is an excellent irrigation system for small projects. I was able to add 20 heads with good water flow in all. Only thing missing are T- or Y- connectors. This system assumes that your water source is at one end of the garden so you can connect to the faucet and extend the larger tube to the other end of the garden. Since my faucet is in the middle of the garden, I had to get a difficult-to-find 3/8 inch T connector from another source.

The media could not be loaded.  TIP: if you love gardening and holiday abroad during the summer this will save your plants and all your hard work over the year.TIP: it's essential to plan your garden and your irrigation system so you can cut it down to right size to ensure each plant receives drops of water.TIP: to help attach the drippers, place the tubes in warm water first.I bought this kit as I have made some new raised borders and wanted to add it to my existing irrigation system.What I particularly liked about this kit is the larger tubing as it allows me to increase the water flow to each and every dripper on the system.The kit has everything you need to get started. Simply connect it to the tap, cut your pipe to size and add your drippers and stakes.It can take some time to plan and setup, so allow for this. It can also be fiddly for arthritis ridden fingers.These tubes are thicker than my previous kit which I'm sure Indicates a better quality.If you found my review useful please consider giving me a helpful vote and perhaps a follow for future reviews. Many thanks

This kit is so easy to put together. It comes with two bores of pipe, lots of tee pieces and lots of dippers, along with the hose end connections to attach to a tap or hose. It is very easy to put together, simply cut your hose to length with scissors, push on the connector and tighten the grips by hand if necessary. Then lay it out in your garden. Ideally you need to warm up the hose using hot water to make it more flexible for getting the end on. The drippers come with ground stakes to secure them in place. It's a well thought out system. I would have included a couple of equal tees to tee off the large pipe to more large pipe. But it's a minor point and overall I'm very happy with such an easy to use kit.

with the extra nozzles was able to set this up to cover a large area of the garden

Es muy buen producto, de calidad y con bastantes componentes para realizar muchas configuraciones, me gustaría que incluyera más terminales de final para poder hacer en lugares distintos el riego, ya que solamente incluye una de tapón de final