Raspberry Pi 4 Case with Fan Cooling Pi 4B Case with 5V 3A Power Supply, 4 pcs Aluminum Heatsinks Support Pi 4 Model B 8gb/4gb (No Raspberry Pi Board)

Layered acrylic cases seem to be a dime a dozen these days - everyone is making one, and not everyone is making them well. They put together loose and sloppy, and are hard to get lined up tight with clean edges. That's not the case here. This case was clearly well thought out from bottom to top - each layer is precisely molded to the components on the Raspberry Pi 4 to ensure a great stack. This definitely means you aren't going to get a Raspberry Pi 3 into this case, but it also means you are almost guaranteed to get super clean looking edges once your stack is complete. The fan is very quiet, even on 5V. I tried switching it to 3.3V, and I honestly couldn't hear a thing unless I put it up to my ear to listen. The two videos attached barely have the fan audible - this was the best I could capture! Keep in mind that the video was shot about six inches from the Raspberry Pi in an attempt to pick up audio. At a more reasonable distance, you cannot hear the fan at either 5V, or 3.3V. The pictures attached show the unboxing, and various stages of the build process from start to finish. The good: - It looks amazing, seriously. This is about the best looking layered case I've put together. - The included heatsinks and power supply make this case go from a good deal to a great deal... you're not going to need to add anything except an SD card, a micro HDMI cable, a keyboard and a mouse to get up and running. The neutral: - Pay attention to the (fantastic) instructions. Don't get ahead thinking you need to install the heatsinks first. These instructions really are clear about when you need to do what. If you've done this many time before, you'll be tempted to just "wing it". You may end up installing heatsinks in a way that will make the layers not line up. - The wires on the included power supply seem a bit thin, but it's only carrying 5V @ 3A, and it IS marked as UL listed... so they must be correctly. For reference, The wire on the official Raspberry Pi power supply is about 3x thicker. The bad: - I had no bad experiences with this kit, I am really happy with my purchase. Verdict: Highly recommend. As soon as I buy another Raspberry Pi 4, I'll be buying another case - guaranteed!

It’s one of the best cases I’ve used. The sleek, clean look makes it perfect for a desktop setup, and it comes with everything you need to protect and cool your Raspberry Pi right out of the box. Pros: ✅ Sleek & Minimalist Design – Looks great on any desk and fits well with other tech gear. ✅ Great Cooling – The built-in fan and aluminum heatsinks keep temperatures low, even under heavy workloads. ✅ Easy Assembly – Everything aligns perfectly, and installation is quick and hassle-free. ✅ Includes 5V 3A Power Supply – No need to buy an extra adapter; the included power supply is stable and reliable. ✅ Strong & Durable Build – The case feels solid, providing good protection for the Pi board.

First, I have to say that I recently put together a case for my first Raspberry Pi 3B+ that was not the layered style and I liked it so much that I wanted to do the same when I got a Pi 4B. However, since it was not yet available, I decided to give one of these layered cases a try. As long as you have a Pi 4B, a micro HDMI cord, a micro SD card and a keyboard and mouse, this kit will be the only thing you need to put together your own little desktop computer. In my opinion, getting a kit with heatsinks and a fan is the way to go to keep the unit cool when in heavy use. This is especially important with the Pi 4B which runs hotter than its predecessor, the 3B. The instructions that came with this kit were clear and easy to follow (just follow the pictures step-by-step). Even taking my time and taking some photos along the way, it took me about 15 minutes to put everything together nice and snug and when finished, the enclosure is nice and solid and attractive as well. The fan runs silently even at 5V with the device only at elbow's length. The power supply that came with the kit is also nice as the connector seats firmly and having a switch on the cord is a great feature. When I saw another review for this kit that said the case interfered with the insertion of the HDMI cable, I was a bit concerned but my cable fit fine and seated fully with no interference whatsoever. It's the only cable of this type I own or I would have tried others but I suspect the vast majority of cables will work without a problem. The micro HDMI cable is new to the Raspberry Pi, so one recommendation I would offer is that these kits be supplied with one or two of these cables. So, to conclude, I liked this case more than I expected but even having said that, I still want to try a non-layered case for my Pi 4. It will be nice to compare the two side-by-side but after putting this one together, either choice is going to be a good one.

Perfect case

Easy to setup. Fits the Pi nicely and the integrated fan is great. Its been running smooth 24/7 for about a year now.

This case is good. Came with heat sinks and a fan which is two speeds, really liked that. Went together good and looks good. Fit perfectly. Also it’s a really great price for what you get!

I held off buying this for a while because so many people had issues... I'm here to tell you it's easy af. I took maybe 10 minutes to do it. If I had any complaints it's the power cord Is not as long as I'd like. 1st of all likely the most thorough set of instructions placed with an item I have bought on Amazon to date Perfect product Under priced Assembly 10 minutes Aesthetically pleasing Functionality perfect. Zero issues with plugs Fan is so quiet, i nicked my ear b4 I heard it. My pi would now survive a bomb blast I'm sure of it. Will definitely be back for more. Tips when you get it do not shuffle the pieces. Take the screws out hold it together as it was and start there. Do Not mix the pieces up I can see that being a pain In the buttu

Fits beautifully, and the fan operates quietly (barely audible), even at maximum power. Generally intuitive assembly (had to check the installation guide at times) and the included heatsinks stick on easily. Super happy with the high quality build of this case. Works as advertised.