Husqvarna135 Mark II Gas Powered Chainsaw, 38-cc 2.1-HP, 2-Cycle X-Torq Engine, 16 Inch Chainsaw with Automatic Oiler, For Wood Cutting and Tree Pruning

I bought this saw to compliment the larger 460 Husqvarn Rancher that I purchased several years ago. The Rancher has proven itself to be reliable and useful helping me with 7 heavily wooded achers. I needed a smaller (lighter) saw for regular upkeep on the property. I selected this saw because of my past experiences with Husqvarna products and the saws lightweight. Having already owned Husqvarna saws, I knew the startup proceedure. I unboxed the saw, added the 2.6 ox of 2-cycle oil (provided with the saw) to 1gallon of gasoline, and filled the tank on the saw. I also filled the bar lube resevoir (not provided so you'll need to purcahse some). Follow the startup proceedure and the saw starts EVERY time -no issues. For those who have not had a Husqvarna, the startup is to push the chain brake forward, Pull the chock out and push it up to the highest position, pump the primer ball 6 times, place the saw on the ground, slip your right foot through the handle (to hold the saw firmly to the ground), place your left hand on the top of the handle (to steady the saw when you pull the start cord), pull the rope-start with your right hand until the saw "burbs" or acts like it wants to start (about 2 or 3 pulls), push the chock down to the next "notch", and give the start cord a pull. The saw will start every time. Pull the chain brake to the rear and Let the saw idle for about 15 seconds, then give the thottle a good "blip", run it up to speed for about 30 seconds to warm the saw up, and you are ready to cut. The brand new saw - out of the box - started on the first pull after following the above proceedure. I really like the light weight and very sharp 16" blade. I also like that the air filter element is easy to access and clean. I'd also recommend investing in a Husqvarna carry case with integral chain bar cover.

Great product. Started right up

If you need a saw for home owner use that doesn't cost a fortune and does the work of commercial saws this is a good choice. I've taken down some apple trees, and done some trimming of large limbs and this saw gets the job done. Great value!

Bought a year ago, it works really good, I haven't had any issues like its predecessor , Poulin chainsaw

Seriously this thing doesn’t come with the basic components like a bar oil. I understand gas, but seriously no bar chain oil ships with this thing. I needed it quickly. That’s why I bought it on Amazon now I have to run out.

This saw has been a stellar as for performance! Lightweight, powerful and a dream to operate!

Lightweight. Very powerful. No job to big for this beast

Really like this saw. Starts & runs well (if you read the directions) I have a feeling those that complained about slow or no start..........didnt read the directions.