WLJH 74 Led Bulb Dash Lights 3SMD Super Bright T5 2721 37 286 Wedge PC74 Twist Socket Automotive Instrument Panel Gauge Light Kits Cluster Shift Indicator Interior Bulbs Ice Blue Pack of 20

#103 Bulbs are $6.99 per pair and to replace a pair that is burned out costs the same as a kit that will do your complete instrument cluster and if you have to remove the cluster to change two bulbs then you might as well replace them all as generally once a bulb in car goes out the rest follow over the next few months.This creates an opportunity for an upgrade and improvement, Plus LEDS come in array of colors so you can go all Xhibit and Pimp Yo' ride! of course you could just want to do it as upgrade, it's easy enough!I chose Blue because it matched my stereo decks lighting (hey we all have our reasons) and wasn't disappointed at all. although my pics may not do it justice as I am a no photographer.Old greenishe factory Picture 1.Bright, very visual and aesthetically pleasing Picture 2 original factory dash and if you turn on your daytime running lights the blue shows well in daylight! although my pics don't do it justice.*Since I was already at it, I also put in a white instrument overlay and painted the instrument needles fluorescent rd picture 3. I mean since I was already working on it as it is and that was only a few steps more. This is above and beyond not related this product*Best of all, it's unlikely you'll ever need to change the LEDS again unless of course you keep the vehicle 20 plus years...***I am not mechanic and this not mechanic's advice, just how I did it. follow at your own risk, results may vary, I am not in any way responsible for your decisions ***On a 2004 Jeep grand Cherokee you'll need a phillips head screwdriver , a needle nose plier and a sharpie.There are youtube videos that show how to do this also..Step one: Remove plastic cover surround between the steering column and the cluster this is done by hand.Step 2: Remove the four screws that holding the cluster two below and two above.Step 3: Pull cluster out and remove , then unplug the power cord.Step 5 Remove old bulb clips and bulbs using a needle nose turn half of turn ( I suggest cleaning the contacts with alcohol and a Qtip)Step 5: Install LED bulbs in the clips and then back into cluster. Once all complete ontoStep 6: Plug in power and turn on lights, any that didn't light up put and X with a sharpie on the back. Just relax this is not so badStep 7. remove unlit bulbs and then remove them from the clip socket and rotate 180 degrees, the LEDs are polarity sensitive and this will correct any that didn't light. Slightly frustrating but still you've had worse outcomes and this manageable.Step 8 : Plug in check again, If all are lit.Step 9: Reinstall the cluster, screw the cluster back in place and replace plastic cover surround between the steering column and the cluster

Installed these last night on my 2006 F-350 6.0 Diesel Lariat. One thing to know when installing them is that the direction they go in matters. So, once you have them replaced, test them with the dashboard still apart. If you notice some not working, just pull them out, turn them 90 degrees, and reinstall them. There’s one tricky one to test which is the bulb that indicates that cruise control is on. I believe it’s on the very bottom of the left side (looking at the face of the instrument cluster). Another important thing to know, the bulb housings supplied do not fit in the instrument cluster, so you’ll need to pull the old bulbs out from the OEM housings, install the LEDs into those housings, then you should be good to go. Just be very careful not to drop/lose the OEM housings. Anyway, I didn’t find any bad LEDs in my order and my dash is back to being bright. I would definitely recommend.

They worked out well, simple to install, bright, they also work for most of the heat/ac controls in my non-fancy 04 Grand Cherokee Laredo.My only complaints are I wished they didn't change the color of my dash; while both the oem and these bulbs are white, my dash went from the oem green to a light blue color. I am guessing the color change is because of the brightness and or kelvin of these bulbs. The description does not state the kelvin temperature of these bulbs; they must be around 6k(?). The new dash color is nice and pleasing but is now different than other control lights, like the shifter, heating/ac controls, stereo, etc.. The oem green is coming from the dash clusters and not the bulbs itself, but the kelvin of these must change the tone of the color. I also like to keep things more original/oem. My other complaint is that since these are installed my FM stereo has increased static whenever the lights are turned on, must not be fcc noise compliant.I wished they included the 2 odd bulbs for the A/C and Rear Defrost buttons; I can't seem to find LED replacements for these and they are still green/not matching the rest of the dash anymore. Also, something to replace the shifter light setup which is still green.

work like a charm but i have to change overlay on 02 mustang but work bright recommend cant go wrong for price for a note if do not work turn bulb around

It says pink in the video and purple on the actual item button, not sure why. The lights mostly don't work, half of my dash was partially lit up, and barely discernable that light was even coming through, even after flipping the lights around. If you're looking to waste time and money, I'd definitely recommend buying these things lol

Sockets didn't fit well into my dash and it took a little messing around with twisting them back and forth until they finally came on they lasted for probably about a year but that's all the life I got out of them

Recommend.

Super good bright light output. Easy to install. Idk if these are polarity specific because I nailed it with 9 of em the first time, unless I just lucked out. If that's the case not worrying about the polarity it a super nice bonus. Worth it and the color saturation is good.

The bulbs were very easy to install and functioned as intended. Bright but not blinding, the color is nice at night, hardly noticeable during the day. Some of the bulbs didn't light on the first try but as other comments have stated the polarity is just backward and the bulb just needs to be flipped. No burnt-out bulbs yet, will update as time goes on.

Ho acquistato queste eccellenti lampadine per sostituire quelle montate su di una vecchia moto di un amico e devo dire che sono davvero eccellenti. Rispetto ad altre hanno a mio avviso un grosso vantaggio: dispongono infatti di due gruppi di Led. Quelli "in testa" ideali per illuminare direttamente attraverso il cruscotto e quelle sui lati per illuminare anche sui lati del quadro. Ottimo venditore al pari del prodotto.

Solo vienen 25 focos. Buena iluminación pero no es la cantidad que dicen

Very happy 👍

Easy to install, great results.