⚡ Stay switched on, rain or shine — power your ride like a pro!
The Nilight 200A Starter Relay 4 Pin Split Switch is a heavy-duty, 12V automotive relay designed for high current applications up to 40 amps. Featuring a fully waterproof and dustproof sealed design, it ensures reliable performance in all weather conditions. Equipped with a pre-wired 5-pin harness using durable 12/16 AWG tinned copper wires, this relay set offers easy installation and long-lasting durability, making it ideal for automotive, truck, RV, and camper electrical control needs.
| Connector Type | Through Hole |
| Contact Material | Copper |
| Contact Type | Normally Closed |
| Current Rating | 30 Amps |
| Mounting Type | Wall Mount |
| Brand | Nilight |
| Operation Mode | Manual |
| Coil Resistance | 100 Megaohms |
| Coil Voltage | 12 Volts |
| Contact Current Rating | 30 Amps |
| Maximum Switching Current | 40 Amps |
| Maximum Switching Voltage | 14 Volts |
| Minimum Switching Voltage | 14 Volts |
| Specification Met | CE |
| UPC | 812227032197 |
| Global Trade Identification Number | 00812227032197 |
| Manufacturer | Nilight |
| Model | 50044R |
| Item Weight | 1.01 pounds |
| Product Dimensions | 7.17 x 6.34 x 1.93 inches |
| Item model number | 50044R |
| Exterior | Painted |
| Manufacturer Part Number | 50044R |
| Position | Left |
| Voltage | 12 Volts |
J**A
It do what it do
Matches the description. Worked without issue. Easy to install. Delivered on time. Packaging protected product and in good condition.
B**1
It works
It works great. I followed the wiring diagram that was given to me. I also compared it to the device(door lock actuator) wiring diagram. I connected this item to the lock actuator and negative trigger from the aftermarket car alarm. You can use these relays to do a lot of different stuff, negative or positive triggers. In my case, I used the aftermarket door actuator to run my trunk release. 85 to alarm. 87 to green wire of door actuator. 30 and 86 wired together. Another wire from 86 and 30 with 25amp fuse to constant 12v.
C**7
wiring
nicely made ane water proof
M**K
HD relay and fuse in one!
It is nice to have a relay and fuse in one. They do, of course, take up more space, but make it easier to add a relay controlled accessory.
M**.
Nice relay with minimal short coming.
The wires are not tinned. They do not mark wire numbers to wire colors. Not that big of a deal but something they should do so you don't have to do it. I am rating at a 4 because of the wires not numbered and I just installed the relay. It does appear to be well built and has a very tight fit.
E**!
Excellent
Excellent product
I**Z
Reverse polarity set up
Used these for a cheap but upgraded fix for my seadoo vts trim system though wired this way it works for most dc reverse polarity needs. The red wire 30 sits normally closed to 87a the yellow wire. Then switches to 87 when the coil from the black and white wires are energized. So red being the output to the device is sitting on negative ground until the relay is tripped then it switches to positive while the 2nd relay is still on negative giving a closed energized loop. Hope this helps. It's all rocket surgery!
C**L
They Seal Out the Water
These have worked great on my truck lighting projects where there is any chance of water exposure. No issues with shorts or blown fuses due to water.
ترست بايلوت
منذ 3 أسابيع
منذ 5 أيام
