Nilight 2PCS 3.9 Inch Front Rear Side Marker Lights 3 LED Amber Clearance Indicator Lamp Waterproof Sealed Surface Mounted for 12V Truck Trailer Camper RV

The convenient two-pack came quickly and installed easily, and nice and bright. Awesome price too

fit my utility trailer, beautiful LED

exactly what was needed. Easy installation. BRIGHT.

MOUNTING: These lights are theoretically easy to mount but if you have a hardend steel frame on your trailer, you can forget the self-tapping screws this light comes with as they won't survive the drilling. Go buy some 8-32 ,1 inch stainless steel phillips bolts with a flat washer. locking washer, and nut. Drill out the hole in the black light bracket just slightly larger than the bolt and you're good to go. These light require a ground to frame. If your trailer frame is painted, consider using a wire wheel in a drill and grinding the paint to bare metal for a solid ground. Also crimping a connector hoop the ground wire makes attaching to one of the mounting bolts much easier. Once the black braket is mounted, you have to place the light into the bracket. It's a super tight fit and the only thing that holds the light to the bracket are two little plastic teeth at the ends of the light that slide into a groove at each end of the bracket. You have to be careful when attaching because the teeth or the lip of the groove can break. Go slow and place one end into the groove at an angle and try to slide the other into the groove. I used a screw driver to gently pry the lip of the groove up to create more room. Once in place, make sure it's properly seated by using a small screw driver to put the orange teeth on the light toward the back of the groove. It should click if not all the way in. When trying to angle the light to get it in the bracket, you may need to gently tap it to get the teeth of one end to fully seat in the groove. If you don't, the other end won't clear the top of the groove and it won't go in. BRIGHTNESS: These are bright lights however there is one caviat. The brightness is only viewable when looking dead on to the light. The lighting effect significantly diminishes at even gentle angles. It was so bad, when I was testing the light, I thought they weren't working until I happened to walk to a different angle and noted that they were in fact illuminated.

Easy to installed, but not as bright as I thought they would be. They still look great.I

These Nilight LED lights are compact, bright, and very easy to install. With a sealed and waterproof design, they're ideal for my truck. They function as marker, indicator, or clearance lights, offering great visibility and durability even in harsh conditions. Highly recommended.

Received received What was described

Light fit to replace one of the back brake & turn signal lights of our 2004 Logan 3 horse Performance horse trailer well.