Samsung Galaxy S6 Case [Dark Blue] RhinoShield CrashGuard Bumper [11 Ft Drop Tested] No Bulk [EggDrop Technology] Thin Lightweight Protection

Great case that adds little bulk while adding some grip to the phone. One gripe I have with this case is that it has too small a cut-out for my headphones. I believe that may be due to how thin the case is to begin with since a larger cut-out might affect the integrity of the case and make it prone to cracking around the head jack. Hence the thinness of the case does come at the price of smaller ports (I have the Samsung charger cable so I have not run into a similar issue with the charging port). Another minor gripe is that the buttons, while easy to press, collect dust because of their deep indents. If these are non-issues to you, I recommend this case.

After a few days of using this bumper case, I have to say that I'm fairly satisfied with the security and style it provides.However, I must say that I have three bothersome issues with it.1) While I do find that in the right lighting the dark blue case matches the color of my phone, I have noticed that around the edges, where the bezel's lip covers the phone, the paint is showing signs of somewhat cracking. This ties into my next issue.2) I have to say, while it is still fully intact, I am increasingly anxious whenever I remove or re-install the case. Reason being that the paint is showing wear marks (as a matter of fact, the first time I removed the case they showed up) around the stress points, the inner edges. I am concerned mostly that, over time, this will eventually wear thin and collapse, leaving a broken case.3) As for my final reason, the sound quality. On this Galaxy S6 variant of the case, there is a plastic grill that covers the already existing speaker grill of the phone itself. The issue with this is that the holes cut out in it are too small, which in turn greatly impairs the sound quality. Granted, I have only noticed this decrease in quality when notification tones play, oddly enough. When the tones are set to anything that isn't too quiet, the case applies a rather "tinny" sound to it. As I said, I only notice this with notifications, music and other audio still sounds fine, to what I've experienced. I suspect it has something to do with the pitch of the sounds, but that's beside the point. In all, I question why grill wasn't just left as one large cutout like other cases.As a side note, I also noticed that this case is not compatible with any connections much larger than the ones that come with the phone (micro USB and headphone jack). This is not much of any issue to me, however, as the new micro USB cords I purchased from Amoner seem to work fine (if anyone is curious).Aside from that, those are my only gripes I have about this case. Over all, it rocks a minimal look which lets the Galaxy S6 show off its impeccable design, while still supplying that protection and grip which it otherwise lacks. Questionably large inputs beware for this is likely incompatible, unless you force it. Paint wearing away is a minor, but noticeable issue that can be somewhat subdued with a bit of rubbing each time it shows up. Wear on the gripping lips of the case is a concern, and sounds quality is an issue, but so long as the case doesn't give way, I'd recommend it.P. S.Evolutive Labs, I can't help but think my wear concerns are from improper application of the case, but I was unable to find any methods of installation for the Galaxy S6. If there is a particular way to install and remove this case, or if it doesn't matter and the case will surely hold up, please let me know. Thank you for your time, and (if this truly is just an anxious concern) for your fantastic product.

I purchased this case with a bit of trepidation. What I wanted was the lowest-profile case I could find, that would provide some much-needed grip, and would still show off the lovely build of the GS6. I think I got exactly what I was looking for.First off, the reasons for my trepidation were two-fold. Many people have commented that the case cut-outs are too small to accommodate some USB cables and/or headphone jacks. Well, I haven't found that to be the case. I have tried every earbud I own, as well as all of my USB cables (1 is particularly large, see attached photo), and all of them fit just fine. YMMV, of course, but I suspect that Rhino Shield may have updated their case.Secondly, at least on review mentioned that the case is too slippery, which is one of my parameters. Well, I have certainly had grippier cases, but this one still provides much, much more traction than the bare phone, so I'm satisfied.So... This case does exactly what I wanted. It's slim, it appears to provide decent protection, it's purty, and, well, it just works (heh). The only improvement I would want is the addition of a lanyard hole (are you listening, Rhino Shield? My idea, so send me a free one when you make it, alright?) Since our phones have supplanted stand alone cameras, a method of securing them while taking pictures whilst zip-lining in the Costa Rican jungle would be nice.I cannot attest to the protection aspect of the case, other than it keeps all the delicate bits, including the camera lens, raised off the table. I didn't buy the case for drop protection, haven't dropped a phone in years. There are tons of videos showing ridiculous drop tests on YouTube, however, and it certainly appears to do the trick.

When I wanted to purchase this case, I did a lot of research to realize if this is what I am actually looking for. In terms of protection, Rhino Shield Crash Guard is a high-quality shock-absorber to save your phone from damages due to accidental drops. It adds almost no extra weight or bulk to your phone, yet provides comparable, if no better, protection compared to other standard bulky cases. However, after 2 months of use, I have noticed two critical design issues with this bumper case. The first one is an aesthetic issue with the matt coating on the bumper which looked really awesome at first, but now that it has started to peel off on its own, looks really awful (see pictures). Besides, there are several random scuffs on the edges of the case even though I have never dropped it. These are wears due to everyday normal use after 2 months, possibly from the case being rubbed against other stuff in my pocket. The second design issue, which has also been pointed out in previous reviews many times, is with the headphone and USB cutouts which are too tight to accommodate many non-OEM handsfrees and cables although the original earbuds and the USB cable coming with your phone fit perfectly. Overall, though I like its minimalistic design, I believe this bumper case is overpriced considering the quality of material used.

Decent case, however the material is slippery and it makes the phone a lot wider. I almost feel as though im more likely to drop the phone in this case. However, bumper style options are limited, and the thickness obviously contributes to drop protection, so it's a trade-off. Only gripe is the speaker grill covering which mutes the speaker too much.

Bella cover molto resistente agli urti ma dopo 2 mesi si inizia a rovinare la plastichina che ricopre il bumber. Sarebbe perfetta se non ci fosse questo problema estetico

Great product. Found out about it through an impartial you tube review. Comfortable great product that seems to live up to its hype. I would recommend this product.

confezione e spedizioni eccellenti come sempre.il bumper si presenta solido e di qualità. non posso ancora dire se sarà efficace a proteggere il mio Galaxy S6 dalle cadute ma sicuramente toglie l'effetto saponetta dovuto al vetro, ai bordi stondati. Prima vi assicuro che si spostava molto facilmente su superfici leggermente inclinate( mm ) ora non corro più il pericolo di vederlo scivolare.Nonostante il suo spessore rende ancora s6 manegiabile ( ore assomiglia più ad un telecomando, ).il tasti fisici del volume rimangono morbidi alla pressione, mentre ho l'impressione che il tasto accensione sia leggermente più duro. ma non è un problema.I fori per cuffie , usb , sono perfetti.Ogni foro dell audio ha la sua membrana del bumper ma non noto una riduzione significativa del suono.ho comprato questo Bumper per 2 motivi :Rialzare la fotocamera rispetto ai piani d'appoggio e LO FA'.Proteggere S6 dalla cadute evitando di distruggerlo. Questo è da vedere.

The case wore out VERY quickly. I'm not hard on cases. I have a desk job and my phone just goes in and out of my pocket. There is some sort of aesthetic/grippy coating on the outside hard plastic part. This started flaking off around the holes on the bottom of the phone and on the corners. The softer plastic/rubber internal bezel which is in contact with the phone also started to peel and come off in chunks on the corners. Functionally I trust the case to protect the phone, but it started peeling after about 3 months and has got progressively worse. It's been almost a year and it looks like the case has seen some pretty intense action, but it hasn't....