Ekena Millwork PNL20X20AS-01-CASE-4 Ashford Molded Classic Wainscot Wall Panel, 20-in. W x 20-in. H, Factory Primed White, 2 Count

I had an existing chair rail and added thin decorative molding below it with these pre-made frames under that. It looks so nice! Yes these are not wood but once they are on the wall, they look they are and that is all that matters. It is also a bonus that there are no miter gaps in the corners like traditional wood built frames. The material is lightweight but durable. I used 2" 18 guage brad nails and shot into the studs where I could and into the drywall where there were no studs. Recommend a thin bead of caulk on the outside and inside to finish it off. All the people leaving negative reviews bought them thinking they were actual picture frames lol

I love these pre made wainscoting panels. I have done so many things with the different sizes. Great for doors too. I used this size around out kitchen island. Just used wood glue, caulked and painted them all the same color as the island. Looks high end on a budget. I have used bigger sizes to do the walls and they look so good, I used a nail gun for those

These looked and worked better than expected. Light weight, takes paint well, easy to install, makes a big aesthetic difference. I recommend painting before installing (and touching up afterwards) and using a headless brad gun to mount them (I bought a Milwaukee cordless brad gun just for this job...and it was worth it).

Product came nicely packaged and had proper protective material to avoid damage. This is important since product is made of foam. (Ridged strong foam, but still foam) I ordered a 12 pack and none were damaged. Some however were slightly warped or not Square. This wasn’t a big deal as there is a lot of play, while installing, to get the make to square angles. I used construction adhesive specific for foam and tacked them into place with a nail gun. Installation was a breeze, once spacing is configured. They look great.

We had terrible oak, hollow, plain doors all throughout our home. We don’t plan to stay here forever so I didn’t want to buy all new doors but I knew I didn’t want to live with these boring ones either. I came across these and decided to give them a try! We are so happy & pleased with how they turned out! It was definitely a labor of love, though.For anyone interested in the process, I’ll do my best to lay it out here.1) we cleaned the doors with a microfiber cloth & TSP spray. We then rinsed it off with a wet microfiber cloth & let it dry.2) we sanded them down using 220 grit sandpaper/a palm sander - this was a must because the laminate was super glossy and the paint would not have stuck without it. We followed that with tack cloth to get all the remaining dust particles.3) I measured out where we wanted the pieces to go on the door - this part sucked haha! But I’m also super particular about stuff like this. We have doors that are very close to each other, though, so I wanted them to look the same. I measured 8 inches above and below for each panel so that when you look at them, they’re the same height off the ground even though some of the doors were different sizes.4) I used liquid nails to glue them down and painters tape to secure them. Some of the were bowing so you really have to tape them down while they dry! I let them dry 48 hours (we were away for the weekend so it probably would’ve been 24 if it wasn’t for that).5) after removing the tape, I primed the doors using Stix primer! Pretty expensive but I wanted my paint to stick! Even after sanding, the shiny laminate doesn’t fully go away. I painted the primer on the doors and AROUND the pieces. It says they are pre-primed so I didn’t feel as though I needed to prime them and didn’t want to risk any streak marks.6) After that was dry, I used caulk and ran it around the pieces on the outside and inside. I wanted it to have a clean look because even after taping, there were some areas that didn’t hold/were bowing. I let that dry.6) I then painted 2 layers of paint (with 24 hours between coats) using Benjamin Moore’s Advance line. It’s pretty self-leveling so I didn’t have to worry about streaks as much. I painted the pieces and doors with a Wooster brush and mini roller.7) attached my hardware and enjoyed!We’ve had a handful of people over now and some of them knew we were doing these and said they would never have known/absolutely loved how they turned out and the ones who didn’t know, were SHOCKED when we told them. Overall, it’s definitely a process but I’m so happy with the end result! I hope this helps for anyone who is wanting to spruce up their doors but not have to pay the price for fully upgrading!

I am so glad I purchased this for my door. It really upgraded it and made it look more expensive.

This is a frame in only the most basic sense of the word. Let me count the ways in which this frame disappoints:1) It’s made of what appears to be cheaply formed foam, like one of those old fashioned toy gliders. It’s a very cheap material that feels like it will snap if you look at it wrong. The surface is poorly finished, with lots of defects like bumps and pits and overspray.2) There is no recess for your picture or canvas to set into. This is literally just a flat, one-dimensional rectangular piece of plastic. I guess that’s what is meant by “picture frame panel”.3) There is no glass or Plexiglas included. If you want to put your own glass into this frame, you’re out of luck. There is also no hardware to use for hanging. Granted these things were not listed in the description, but when buying a picture frame, people usually assume these are included.4) If all that weren’t bad enough, the measurements of this frame were taken from the outside edge. If you buy this to frame a 16”x20” photo, you will be covering up a significant amount of the picture. The dimensions of the opening are roughly 12.5”X16”. I have no idea what size picture this is meant to frame, but it certainly doesn’t work for the 16”x20” picture I intended to use. Normally frames are sold with the inside dimensions in the title, and the outside dimensions listed in the description.I am sending this back for a refund. I suppose if you are buying this for some kind of arts and craft project (set decoration?), it might be useful. But given the amount of work you will need to do to make this frame presentable, I would be inclined to buy a few scraps of trim from a hardware store and make something myself. As it is, this is way over-priced for what you get.

Very nice quality and ease to apply to door I had redone!

These were perfect. I wanted to update the inside of condo entrance door and this was easy to install. Just a bit of glue, caulking, paint and done.

Good product

I am missing items

Las molduras son de muy buena calidad y fácil de instalar, pero sólo recibí 2 y no he recibido información de cuando recibiré el resto (El mensaje de Amazon dice "Entregado")

Super belle qualité mais annonce et emballage a revoir.