Motor Wireless Remote Control Switch 110V 220V AC 10A High Power Roller Shutter Door Electric Curtain Remote Forwards Reverse, Wide Voltage 85V-250V 433MHz RF Remote Control Relay

Using this to control a motor for my pool cover for which the electronics failed and cost alot to replace. This was easy to install and works great. The range on the remote is great. Saved me alot of money.

Added this to a hoist with a hand held remote... Allows addition of limit switches and safety switches before use.. Limit switches were normally open ... So will close when triggered... And once triggered will not allow remote to move in that direction.... So after up limit.. only will move down direction... Safety switches in parallel normally closed.. so must be triggered open before remote will work.... Two wiring diagrams for study... I had to open my hoist up to learn how the wires inside are to interface the wireless remote to the wired connection to the hoist... Best of luck and safe projecting...

Had trouble with the first pair. Second set works well enough for what I need and they're cheap.

Used this to make my boat lift remote controlled. Works great at a good price.

Very quick shipping and product seems good to go. I’ll update once I try the product out one way or the other. 😎

Used this to control my attic lift, HF 60347, which can draw 7.5A. It worked very well for almost a year, but then the up relay failed closed (glad I had an emergency stop). So pay attention to loading - the seller's recommendation to limit to 5A is a very good suggestion. If you need more, add on a bigger relay.

I now can Cover/Uncover my Hydraulic Pool Cover with this Remote Control Switch (love operating Cover viewing from indoors!). One switch wired to actuate hydraulic motor, both (reversing) directions; the 2nd switch wired to actuate the hydraulic fluid valve, forward/reverse, i.e., Cover/Uncover; I programmed all remotes to operate both switches concurrently. The original manual key-switch remains functional. For Pool Cover Safety, remove jumper on both switches for MOMENTARY switch operation. The 10-amp (5-amp suggested use) switch contactor rating seems sufficient due to Relay in original hydraulic motor circuit. Time will tell if this switch is durable operating in waterproof box outdoors. I recommend this switch for projects/experiments!

Easy to install directions made it easy to get your wires where it need to be and it works great. Made it nice with the remote switch