Da by 3 pcs 3/8"(10mm) Barb Splicer Mender Hose Brass Barb Fitting with 6 pcs Stainless Steel Pipe Clamps for Water/Fuel/Air

I tried to repair a cracked dishwasher inlet hose that was too old and brittle to accept the barb without cracking.

Good quality . Arrived within a few days of order

This will fit 3/8 ID hosing very well. Handling the product, I felt some sharp spots, not a huge concern as the hoses are tough, still could have used some more deburring for peace of mind. I deburred it myself. In a pinch this will also fit 10mm ID hose, just not as snug. Good price, and plenty of worm clamps.

Well made and great value for the money. Please specify in the listing somewhere that 3/8” is the ID of the connector. I may use these in the future, so not worth sending back.

The clamp edges were all sharp and will cut hoses. I filed 1 clamp smooth, installed it, and then found the worm screw and clamp threads were misaligned so the screw turned smoothly 1/4 turn, and then roughly 1/4 turn, continuously. All the clamps were the same. I threw them away. The barb fittings are fine, but a little thin walled.

This is very sturdy. Very easy to install. You have to clamp it by the end to create a good seal. I clamped it at first with a little bit of the hose part sticking out and i got a leak so i adjusted it more towards the lip of the cut water hose. Good product.

Connecting 3/8” sprayer hose. Works greatDo have to cut hose off the nipple if removing as they grip that tight but not an issue for me to loose 2” off a 50’ hose. Hose clamps a nice addition

So amazon app keeps asking me to review this. Its a brass tee. It works as it should by connecting 3 hoses together. The ends were round as they should be. Its still shiny, I'm sure it will dull with time.. I would buy it again if I needed more.

Fittings were of good quality and installed as expected.

Worked perfectly and got them quick