Hunter Sprinkler MINICLIK Rain Sensor

With rainy season coming I knew I didn't want to try and remember when to turn my system on or off so I decided to make a small investment and purchase the Hunter Mini-Clik sensor. I couldn't be happier! It was super easy to install and it worked right away. I wasn't comfortable putting it on my roof line so I put a 1"x3" treated pine board in the ground next to the system and mounted it about 5' from the ground. Voila!

Works well

Good brand. Good product. Easy to install.

I installed this MINICLIK Rain Sensor On the Hunter ProC controller today. It was easy to connect the wires to the two SEN points in the Controller and also found a good place to mount sensor near the controller. The “operation check to verify correct wiring”, was not clear cut. Instructions tell you to turn on a zone and depress the spindle at the top of the sensor to test the wiring. Mine did not work as the zone was to shut off after depressing the spindle switch. I checked the Hunter web site and was told that you have to turn on the zone manually BUT not with the rotary knob as usual. The rotary knob does not recognize a rain sensor. You have to manually turn on the zone only by the one touch method on the Hunter ProC. Depress and hold the right arrow button to turn on. Once done after depressing the spindle the zone should immediately turn off, which mine did. Other than the small glitch of manually turning on a zone, everything went well and waiting on rain to come to fully test. Thanks Hunter.

This is the exact replacement for my Hunter sprinkler system. Works great! It shut the system down first time it rained.

I liked the simplicity of the installatulion process. I simply replaced my exsisting sensor with a new one, easy. First rain, it shut off the system for 24 hrs. then resumed normal operation. It even shut off the system when it started to rain in yhe middle of the sprinkler cycle. Great investment, saves water, and those nasty comments from those neighbors making fun or your sprinkler running during a rain storm.

This unit is well built and easy to install. Good instructions to follow.

Needed to replace sensor that squirrels ate and to complete circuit to use sprinkler syatem

Très bien

e' quello che cercavo x il mio impianto speciale di prelievo acqua da pozzo gestito da sensori e centraline digitali, mi serviva un sensore x quando pioveva per anticipare l'aumento della falda freatica di sorgente...eccolo, quando piove mi avverte e partono le pompe antiallagamento.....

Works well. Did not come with great instructions but you tube helped with that

Corta el riego bien y se reactiva después de unas horas después de la lluvia en función de la apertura de aireación. Muy sencillo para un programador Hunter Eco-logic.

Received the product promptly from seller. I've installed it for a few days now and it has been ON/OFF raining in the area (both light rain & heavy rain storm from various hours). It is not always raining during my scheduled watering time but I think the sensor is working the way it should..