CDI 3/8 Inch Drive Adjustable Click Torque Wrench, Range 30-250 In Lbs / 4-27.7 Nm (2502MRMH)

This wrench works great. It doesn't have a very audible click but more of a feel.It is very well made. It is very easy to adjust and is very accurate. It even has reverse torque. I would highly recommend this wrench. I also bought the CDI 1503MFRMH 1/2 drive wrench which covers 20-150 foot pounds and this wrench covers 3-20 foot pounds. So with two wrenches i can basically torque anything I need to.

Comes pre calibrated with an official certificate of calibration. I have used many types of torque wrenches from snap on to proto. The quality is very high, features 3 positions for torquing application, Clockwise, Counter Clockwise and a neutral FIXED setting for those tight spots but best for use with a crows foot, that way the rachet is fixed to hold that 90 degree angle. Only draw back is that product has some type of plastic on it for the socket release mechanism, although its plastic, it is durable, but i would prefer steel.

I had to put new lifters and a cam in my 2007 Silverado. I already had two Snap-On torque wrenches. One up to 250 ft-lb and the other up to 100 ft-lb but didn't have one that does the really low torque settings. Since I no longer work professionally as a mechanic I didn't want to buy a Snap-on in the neighborhood of $300. I learned that CDI make the Snap-On branded torque wrenches with the only differance being the ratch head. This turned out the be a very nice torque wrench at a perfect price point. Anything cheaper is total junk and anything nice is priced really high. Only complaint is the ratchet head, not as nice as a Snap-On but I'm really not complaining for the price. I would definitly buy another CDI torque wrench if the need came up.

First torque wrench I bought. Accurate, easy to use and looks sleek. Only wish the numbers were different colors so it’d be easier to read.

Very accurate tested it against Performace Tools 0-60 in lb wrench which I also own. I used two 1/4 in sockets with a 1/4 inch bit connecting them. For low torque below 35-40lbs the performance tool could be considered slightly better because of the fact it doesn't click when it's reached torque. I found that the when the head clicked at lower torques it could add 2-3 in lbs of force for just a moment which doesn't happen at higher values. This doesn't bother me I actually prefer it this way. My only concern was the wrench was not set back to 0 when I received it, but the wrench is still very accurate. Also the bottom of this wrench is not cheap plastic it is a quality rubber, very happy with this tool overall.

After receiving the tool and doing my tool inventory sheet and adding to my toolbox I used a very fine engraving tool to mark MY tool along with (2) other torque wrenches, just this torque wrench had a problem of the chrome peeling up. I contacted the people I purchased it from via email, that I have, they told me to contact the manufacturer. Manufacturer told me NO, contact the vendor you bought it from. I was sick around this time and did not contact them in time to initiate a return.

This is the nicest torque wrench I've owned, after almost 5 years of use on different motorcycles, on critical bolts it's been very reliable with a smooth click motion. It feels consistent. Would recommend as a tool you can "trust" without breaking the bank. Only complaint is the reverse/fixed switch stays in place but could be a bit firmer (easy to knock out of position).

I purchased this wrench online and purchased an IKON ft lb wrench at harbor freight. Sadly to say the IKONis much better quality. A. The on/off switch is metal not plastic like CDI B. The "rivet" near the top on the CDI seem weak compared to the IKON. I'm sure the CDI is a great wrench but I believe the IKON a bit better.

Small, fits in tight places, nice distinct click, reversible ratchet, works as it should. Only complaint is I need my glasses to read the setting.

Exactamente lo que necesitaba y con un tiempo de entrega excepcional

Really nice torque wrench. Short enough to fit into tight places. Very precise, company says accurate to +/- 4%, but the calibration certificate that came with mine was within +/- 1.5%. Only thing I didn't like was the switch on the ratchet doesn't have a positive detent, it's very easy to switch it when working in a tight spot, not worth removing a star though.

works great and the larger range is just what i needed. saves me from carrying 2 torque wrenches in my service kit.

Well made, easy to use and very precise