VIVO Universal Adjustable Ceiling Projector, Projection Mount Extending Arms Mounting Bracket, White, MOUNT-VP01W

This ceiling mount has worked out exactly as I needed. My projector mounted to it without much effort and I am able to get it adjusted as needed. A well made product for my purposes..

In summary: Solid design seems to fit all projector types and allows for easy positioning to get just the right angle. Takes some finesse to get the projector on the mount. See the video for a hands on demonstration. I purchased the ceiling mount for my outdoor theater system and am very happy with it. For the price I paid I received a very well made mount that I have complete faith in. It leaves the projector a good distance from the ceiling (about 4 inches) and allows me to easily position the projector at the correct angle depending on where my screen is, which is important because I may not set the screen in the same spot every time. As you can see from the stock photos, there are three pivot points for you to point the projector up and down or tilt left and right. And the arms that attach to the projector itself allow some wiggle so that you can pivot left and right. You can loosen and tighten each pivot point, but just out of the box the screws were loose enough that I could pivot the projector but tight enough that it would stay in place. Perfect! First time setup will likely take you 15 or 20 minutes to get the arms in the right spot (which requires unscrewing some of those arms) but the design is such that it seems like it should fit almost any projector- including supplying 4 different sizes of screws to attach to the mount to the projector. Once the projector is attached to the bottom part of the mount, you will need to attach it to the top part of the mount, which will take another 10 minutes of unscrewing and positioning. Once you've got everything in place the first time, removing the projector from the mount will take you about 3 minutes each time. I wish this took less time but I can't complain because I don't think that's really what the mount was made for. And 3 minutes isn't really a big deal anyway. I can strongly recommend this product!

This was a great find. It’s the least expensive mount that I saw, and it does the job! I did some creative maneuvering and got the mount connected to the projector with some trial and error. I mounted the ceiling piece with no issues, but I had to think about the slant of the projector before mounting or I would have mounted the ceiling piece backward. If you are going to swing your projector downward slightly, you need to mount the ceiling piece with “made in China “forward, toward the screen. That wasn’t mentioned in the instructions. It looks fine, but you really can’t see it with the projector right under it. I do believe it is durable as it is made of metal and the screws all tighten up. It pivots in about any direction, so you should be able to get your projector image as desired. I recommend mounting a board from joist to joist, or a piece of plywood attached to one joist, lest the mount might dig into your drywall. I would never mount a projector using drywall anchors. I don’t recommend all of the products I buy on Amazon, but I do recommend this mount.

Great mount for the price. Low profile, easy to assemble and adjust. Comes with all the hardware necessary for mounting to the ceiling and your projector to the mount (unless your particular projector requires some odd screw size/length). 1 star off as it's not the prettiest mount; but it's low cost, functional and very secure. I have no worries about my projector or mount falling. I like that it uses hex bolts for the adjustment points as they are easier to tighten down than regular philips head. December 30, 2017 Update: still stand by my review. Good mount for the extremely low cost. Just upgraded to an Epson HC4000 projector (also great) from an Optoma GT1080. As the description now states, this mount can only do 12.5" max spread on the mounting holes. The Epson is a little farther. As a work around I used 3 arms as the Epson has a variety of mounting points (1 center and 2 on each side in a triangle shape). Is it slightly less secure? Yes, but I still have no worries of it falling...the triangle mounting pattern also has the slight benefit of being easier to "center" the balance/tilt of the projector on the mount.

I needed a new mount going from my old Epson 400 max output 720p to my new monstrous Epson 4010 4k projector. I had 2 choices, Best Buy install or a DIY with a cheap mount. I went the later knowing if I messed something up I could just spend the extra coin on geek squad coming out - luckily I didn't need to. This mount is great! It comes with all the hardware necessary plus it includes multiple sized screwed for various brands of projectors. I'm giving the product a 5 star overall due to value, but there is 1 caveat to which I read in another person's review of their Epson 4000 which applies to the 4010 and above line of Epsons as well and that is that 1 of the legs does not reach so you will only get 3 legs attached. Luckily because of the position you can grab with the 3 legs it makes it incredibly sturdy. My only gripe at this point with the mount is how easy it is to manipulate. This may not be a problem for most home theatre rooms, but mine is located right below my kitchen where the kids run through like crazy and the pounding the floor takes above moves the projector to where at night when I turn it on I usually need to adjust it to the center. Not a big deal, but I wish there was a better way to find a setting and cement it to that exact point so it doesn't move. Overall, the minor grip aside it's a very sturdy and heavy mount that at this price point and the articulation it gives you cannot beat.

Great value for your money! The modular mounting system enabled me to set to the right footprint of the Benq th575 quickly. I was able to follow the directions given in the box and mount it within 30 minutes. After mounting, you will be able to adjust to the perfect angle. I would recommend this to anyone who’s trying to mount a projector on a budget.

I can't believe the pricing on this mount. It's extremely well made and was exactly what I needed. I mounted a BenQ MH535FHD in my finished basement. Adjusting it took a bit of time but the entire install was exceptionally smooth. In my case all the mounting hardware was there including the bolts that fit my particular projector. The BenQ I have has only 3 mount holes so I was able to remove the 4th mounting bracket for a clean install. Very low profile. I couldn't be more pleased -- this is certainly one mount to consider depending on the weight of your particular projector.

This does not fit Optoma projectors. There are two issues: 1. the included M4 bolts are too short for optoma. You need to purchase your own M4 by 12mm bolts for a few bucks at a local supply store. 2. The optoma mounting holes are very close together and these arms won't fit, even after removing an arm. You will need to make two modifications: First, remove and arm and cut it in half so that it won't interfere with the other arms. Second, remove one of the arms and mount it in a different location using the existing arcs that in the plate. This mount will work for Optoma, but it requires a trip to Home Depot / Lowes and cutting and relocating the arms. Overall, I'm happy with the mount, but not happy that it took me two trips to Home Depot and probably 3 hours in total to finally get this mounted. Knowing what I know now, I would be able to get this sorted in about an hour, including the trip to Home Depot.

Deze mount past goed op mijn BenQ beamer en voelt stevig aan. Fijn dat deze ook op 2 assen kan roteren zodat je door middel van deze mount je beamer altijd recht op je muur kan projecteren.

This is a excellent bracket I actually used mine as a base or a stand for my projector I got a timber chopping board painted it black and screwed the part meant for ceiling to the board and it’s strong and sturdy the bracket is strong and has many adjustments you only need to tighten up the bolts a bit no need to over tighten

Holding hiesense 3 points 8kg projector perfectly. You need 3 persons to safely mounte your projector to the seiling.

Received as described

Did not get the correct rechargeable battery and no wire for charging