LK [3 Pack] Screen Protector for Samsung Galaxy Note 10 Plus/Note 10+ / Note 10 Plus 5G Flexible Film (Ultrasonic Fingerprint Support) Self Healing HD Clear, Case Friendly

I own the Samsung Galaxy Note10 plus 5g. The screen protector that came on the phone failed miserably. With in 7 months the protector was so scratched up it would barely read my finger print. I thought I would take a chance with this protector even with some reviews that claimed it was complicated to install. I have to admit I was very apprehensive about installing it even after I watched the install video provided via a link. I actually waited a week before trying to install it. Now that I have installed it. I am amazed at how EASY IT ACTUALLY WAS. There are 3 protectors that come with this pk so I figured if I mess it up I can try again. I opened the package and found supplies to install 3 protectors. Everything was in triplicate so u don't reuse anything but the included squeege and microfiber cloth. Everything else there are 3 of. I laid everything out I would need, the protector, a stop block made of hard foam, a cleaning and drying cloth, a dust collecting sticker, a squeege, a instruction sheet with step by step instructions and microfiber cloth. I took a deep breath and started. Aligning the protector is always hard however with this one u can pick it up and realign it again and again. I actually pulled it off the phone really easily I might add and reapplied it 7 times before being happy with its placement. I did have trouble getting all of the tiny little bubbles out at this stage and left a couple but it did NOT affect final application of the film. I stuck the stop block to the table (that thing really STICKS TO THE Table but it's easy to get off and nothing was left behind, no glue or pieces of foam nothing) aligned the top of the phone, laid the included squeege on the dotted line and peeled step 2 and just slid the squeege forward to the top of the phone. There were NO BUBBLES AT ALL LEFT BEHIND. I turned the phone around placed the bottom against the stop block and repeated the step before peeling up tab 3 to the dotted line then slid the squeege forward and got the same result. NO BUBBLES. I peeled the final tab 4 off the protector and the film never tried to lift with the tab. I then used my thumb to press down the sides to the phone for both sides. Then cleaned the screen with the included microfiber cloth and that is it. It LOOKED COMPLICATED BUT WAS SO EASY I WAS EMBARRASSED I WAITED SO LONG TO DO IT. Just take ur time follow the step by step instruction sheet and it will turn out like a professional did it.Now how it preforms. I didn't have to reenter my finger prints. The phone read my prints easier and faster than it did with the included protector that came already installed on the phone when I bought it. The stylus tracks better as well. Before the stylus dot had a slight lag when holding the pen just above the screen and moving the pen back and forth the dot followed a little behind. With this protector I do not see that. My fingers "slide" across the protector without that feeling of rubber and resistance I got with my old protector. It actually feels like glass until press just a tad. It then becomes like a sticker so u don't slide across ur keyboard when u don't want to. It doesn't feel like it's real thick either. I can't speak to scratches yet although I have been using my stylus for almost a week almost 24/7 and I don't have any scratches so far.The coverage of this protector is AWSOME. it actually covers the ENTIRE SCREEN from top to bottom and side to side. The WHOLE THING. It doesn't stop halfway down the side like most do. It goes all the way to the edge of the screen even over the curve of the sides. It is case friendly. It did NOT lift up when I put my case back on which is a 2 piece case. A rubber base with a plastic outer cover so the rubber piece covers the Curved part of the screen and has ALWAYS resulted in lifting up the edges of the protector. This one didn't becouse it extends over the edge much further than any I have had before.I hope I have answered most of ur questions with this screen protector and it helps u make a more informed decision when considering what to buy.

UPDATE 12/1/20- It's been almost 6 months since I installed this screen protector and it's doing fantastic. I'm still on the first one and haven't needed to replace it yet. The sides have stayed down and I have no bubbles or imperfections. I occasionally will switch cases and this hasn't caused any issues. Fingerprint sensor works great. The only negative I can find is the screen protector doesn't have as much, or any, oleophobic qualities. After a while of use, I'll notice a little bit of shiny/greasy quality from the oils on my hands. It wipes off, but just not as nice as it could be I guess. Overall, I'm still very impressed with the screen protector. It's the best install process I've ever had and I didn't get any bubbles. I still have the remaining two protectors which I may not even get to use before I end up buying a new phone.ORIGINAL REVIEW- This is the third screen protector brand I've tried so I'll tell you my experiences.I really liked the default installed protector from Samsung on my Galaxy Note 10+. Over time, I finally damaged that one enough that I needed to find a replacement.I started with the Spigen NeoFlex. The Spigen is a wet install so it was messy, but I was able to align it perfectly and get all of the air bubbles to come out. The sides were about 95% staying down which was pretty good although it sucked that it wasn't perfect like the original. I immediately noticed that there was now an "orange peel" effect which looks like a type of texture. On top of that, the screen would have a rainbow effect when I looked at white and the feeling of the screen cover was sticky and rubbery. I researched further and found out the original screen protector from Samsung was a PET film (Spigen was a TPU) so I started shopping around to find one.I tried the UniqueMe brand and it had a 2 step install. It was nearly impossible to align the protector at the bottom using some supplied stickers and then remove the full piece back cover to install it. I had several air bubbles which I managed to mostly get rid of with a lot of work. The new film felt and looked much more like the original although the fingerprint sensor didn't work as well and the sides quickly started coming up. Very soon afterwards, some dirt and lint was stuck to the sides so they would never stay down.So now I'm trying the LK screen protector with the 4 step install. The install was easy and it went on with zero bubbles from the very first attempt. I have pressed down the sides and everything looks really good. I was able to place the phone back into a Samsung case with the 2 kickstands on the back and it didn't pull up or effect the sides in any way. I used the phone for a couple hours and noticed that there was just the smallest of beginnings of the sides starting to come up. I used a hair dryer on the sides and pressed them down. I'm on day 2 with heavy phone usage and the sides haven't come up at all. It will take time to tell if the sides continue to stay down, but so far, this is a really amazing film. Not only is the entire install process very easy with great results, the screen is clear just like the original and the fingerprint sensor works great too. I like that I have 2 more films after this one wears out and feel confident I'll be able to install again without air bubbles.If you want your phone to look and feel like it originally did and have a pretty easy install process, this is the brand I'd recommend.

Well, I watched the video that they had here, because I didn't see it on any papers that came inside the box. So I installed the first one following the video here with the listing, but my protectors didn't have anything like those in that video. So 1st one was messed up. Too many bubbles. Tried again thinking user error, and it also had too many bubbles. So I was looking at the box it came in, and saw the link to a video on it, so I go to the website, but what starts playing is a screen protector install for an S22, or at least that's what the "title" at the top of the video says. I have a Note 10+. But I received all the stuff in that video that came with my screen protectors, so I watch it. Simple. Like 5 steps. Flawless install. So I decide to try it, since the screen is the same size, and camera in same spot, etc. Worked beautifully on the first half of applying screen protector, but in next to last step, the film got stuck to the protector itself, and now I have a few little bubbles at the bottom of the screen protector. Other than that, it looks beautiful. If I would have went to the website first, instead of coming here to watch the video, I likely would have gotten a clean install on the first or second try. So, do yourself a favor, if you get the white plastic thing that "plugs" into your phone with the installation kit/screen protector kit, go to the website listed on your box. It says S22 in the video, but it works the same, and mine did fit my Samsung Galaxy Note 10+. Wish they would give you 4 though, because people are, well, people. Hehe.

Good

Este protector se ajusta perfectamente al teléfono, incluso si usas protector, y en general se ve muy bien ya que como tiene pegamento en toda la superficie se adhiere bien a la pantalla y no se ve opaco como algunos protectores de cristal, sin embargo, el único detalle por el que no le pongo 5 estrellas es porque como el protector es de plástico, con el tiempo se le hacen marcas de cuando usas el S pen o sin querer tocas la pantalla con la uña y se empieza a ver feo, otra cosa es que si una persona se desespera por instalar el protector puede que le quede mal y lo eche a perder, sin embargo, gracias al video explicativo que te dan y si lo haces con cuidado no tiene porque quedar mal el protector.

Estas micas son suaves, como de gel, y cumplen con el cometido de cubrir la pantalla del celular.Ahora, la contra que le encuentro es que batallo un poco con el lector de huella para que alcance a leerla, pero con presión mas fuerte la lee bien. Además otra contra que le encuentro es la cuestión de que al usar el lápiz para escribir sobre la pantalla, se marcan los trazos sobre la mica protectora y se batalla un poco para que detecte los trazos.Fuera de eso, pues creo la relación calidad-precio es buena mas no excelente, es por ello que le doy 4 estrellas. Además la instalación es bastante bien detallada en sus videos así como en los instrucciones, pero no se puede decir que sea fácil, se toma su tiempo para hacer un buen trabajo.

Desde que adquiri mi equipo en ningun lado pude encontrar un buen protector de pantalla que se asimilara a la mica que viene de fabrica . Hasta ahora.Esta marca es impresionante el mejor que he comprado y puedo decir hasta de mejor calidad que la que viene de fabrica. En apariencia se ve más cara que otras pero NO. Por que te dan 3 cambios y la calidad de las micas es superior a muchas.La instalación fue muy fácil si sigues el tutorial que viene en YouTube.El pegamento de la mica es muy buena pero lo que mas me sorprendió gratamente es que por la forma curva de los Galaxy Note es muy difícil que de los lados quede al 100 y esta queda perfecta completamente pegada hasta en la curva y aunque le pongas la carcasa de protección queda tan bien puesta que no se despega.Lo recomiendo absolutamente llego antes de lo esperado.

He usado ya dos micas y sin duda es una de las mejores. Siempre habia batallado en encontrar una que pueda leer la huella digital y sin duda esta es la mejor, facil de instalar con su video y de buena calidad.