BESTTEN 5 Pack Screwless Decorator Wall Plate, 2 Gang Decorative Outlet Cover, USWP6 Gloss Snow White, H4.69” x W4.73”, Faceplate Cover for Receptacle Outlet & Switch, UL Listed

Just what I needed. These are nice, slick, easy to install, high gloss, and have a clean look.

These BESTTEN wall plates were a quick and easy way to update my basement. Love that the screws are hidden, gives a nice clean look. Install the base plate and then snap the cover on, no fuss. Five in a pack was perfect for what I needed. Gave the basement a bit of a modern touch. Good price too. If you're looking for a simple upgrade, these are a great choice.

These are cute, though a bit tricky as others have said. If you have an older place, I'd suggest maybe sanding down or patching the wall holes a bit beforehand, and not always fully screwing the outlet/switch itself all the way in (that's what will give you more of a gap/bow on the plate). The cool thing is there are spaces left open to loosen the actual outlet screws and try to adjust it while attaching the plates (reduce gap/bowing some). Weirdly, there are zero directions but it's easy enough to figure out. However, the first one I tried to do backwards and it sat MUCH more flush/sturdy because there was no gap. **All the manufacturers would need to fix this, is to make the mounting piece solid all the way through or flat without the lip, instead of having the open gap area in back which allows for the bowing. Or just have the 4 corners screw right in to the wall.** I contemplated siliconing them to the wall instead, so might try that if some of the gaps are still bugging me. After some practice, I was able to adjust some of these to fit more flush, so might go back to the first few for adjustments.Not super well designed but they look sharp for an upgraded look without metal plating, and I do like them enough to keep them. I'll be ordering more and hopefully the double rockers will be back in stock soon!I'm going for a transitional style, so mixing the black and white turned out just how I wanted 😁 Hopefully can add some decals next.

Great Product

These are great. Slightly larger than the brand name plate that is everywhere, so just replace all your plates if you are worried about matching. Works with smart switches too, except weird shaped ones like Sonoff, but if yours look normal, this works.If you have never done hidden screw cover before. Read this. It is so easy when done right, but the complaints here are from people who just do not know.1. Outlets use square tip screw, not Phillips. Get the right tool for the job.2. Loosen the outlet from the box about 1/8”3. Push two screws into the backplate. They recess. So literally pull the plate out of the box as is and push the screws through.4. Separate the backplate from the front plate5. Remove protective plastic from front plate6. Attach back plate to outlet. Tighten it all the way until it is tight, but plate doesn’t flex out of shape7. Tighten the outlet screws until the plate sits flush with the wall. Do not over or under tighten.8. The top plate goes on one way. It has a TOP label. The slot in the cover goes down if your eyes are too bad to read. Push it on until it snaps in. Work your way all the way around.9. If you screwed up, use a flathead in the bottom to remove the plate. Twist to separate, then move the screwdriver around the inside edge until all then snaps loosen.

These covers are great and so is the price

Excellent quality and color. Nice fit

They do look good but when people say it’s hard to take the top plate off once it on they are not lying. I actually cut my finger open trying to get one of the top plates to snap off.