DNA MOTORINGTTC-RU-051 Pickup Truck Bed Top Roll-Up Vinyl Soft Tonneau Cover Compatible with 1995-2004 Tacoma 6Ft Fleetside / Styleside Bed

This cover worked fine with my 1997 TOYOTA TACOMA 6'ft bed. Although not designed with a bed liner, it can be ADAPTED with 6 cutouts for the anchors. I used a BOSCH Oscillating tool to make the cuts, and made the cuts without removing the liner. Once anchored down properly, it felt solid that I don't have to worry about it flying away while driving. As other reviewers noted, it is a bear to close - even during the hot summer days in Aug 2022. The workmanship is very good and the material seems to be of good quality as well. After one year, or four seasons, I'll revisit this review to update.

fast, super easy install, missing one screw but still able to install without.

This worked great for my 1998 toyota tacoma single cab 74.5 inch bed. I was leary as far as which bed cover would fit but this turned out great! Unfortunately the mounting clips to the bed rails were loose so I used the rubber protector the kit came with to put under the clip to fully secure it to the bed. Make sure to measure the distance on each side to line it up evenly. Slight problem with the right side rail closing so I have to play with it to fully lock it down. Looks nice and saves gas mileage too

Installed the soft roll-up bed cover on my 2002 Toyota Tacoma single cab standard bed without a bed liner and the clamps don't work properly. There is enough wiggle room for the clamp to come loose when fully secured with the provided bolt. I had to file off a little over a 16th of an inch so the clamp can tighten enough to secure the bed cover rail to the bed rail. Be prepared for this when installing.I did do an install on my other 2003 Tacoma that had a bed cover and it fit perfectly fine.

Love it! It’s pretty easy to install. I had a stock bed liner from Toyota in my Tacoma (01). I had to cut 6 holes with my Dremel so that I could mount the rack mounts to the frame of the bed. After that you just piece the frame together (3) sides with the tailgate open for end of the rolling cover to clip in. Probably took 45 mins because I was trying not a mess cutting rectangular holes for the brackets. Then just roll it out and adjust the snap in ends so it fits snug but not too tight. Then just enjoy the security and better gas mileage provided by the durable cover!

Installed the cover on my 04 Tacoma.Pros: Fit is ok, attaching it is easyCons: Unclear instructions, had to make some small wooden spacer blocks to fit the included clamps (they were too big)Two of the six allen bolts had defective allen heads where they were basically flat, as if not milled completely. Gotta get more from the hardware store.Overall looks like a decent product, would have given 5 stars if I didnt have to add blocks or get new allen bolts. Its a shame they don't have better quality control.

Not bad for the price

Looks good & works great

You have to modify the clamps a bit to grab the bed. Fits a 6ft box on a Mazda B2200 perfectly. Great cover. Had it on 2 months and so far no problems. Just keep in mind you will have to make the clamps fit if you are using it for this application.