for PowerBeats 3 Ear Hook Loop Clip Silicone Replacement Repair Parts Left and Right Fit Dre Power Beats 3 Wireless Headset Headphone + Tool + Glue (Black)

I am very happy with the replacement ear bands for my earbuds. I've had these for seven years. I use them for work and mountain biking so they were heavily used. The instructions and the replacement pieces will enable me to use them hopefully for another few years. Not everything needs to be thrown away when it breaks; this is a great option to extend the life of an investment.

Perfect fix

Very good and simple. Problem that the glue in the tube was already dried up and unusable. Great value too. Will probably just switch the other ear tip to balance it out and match them up for best fit.

I do not recommend this repair kit because the E8000 (glue) was dry inside the sealed tube, AND the plastic pry tool snapped with very little pressure. As a result, I am unable to complete the repair (mostly because of the E8000 being dry - which means I can't seal the headset closed. One of the two Ear Hooks looked like it had glue residue at the base - as though someone had tried using it but wiped it off and returned it. The rest of the kit appeared new - despite the glue and pry tool being total fails. The ear hooks look like they're a good replacement. Of course now I have to go out and get my own E8000 separately, so all this kit was good for was a tiny screwdriver and the two ear hooks. But not enough to get the job done.

Great Kit to have, gets the Job done swiftly, this brand is a good One!

I followed the YouTube video I found and all went well until I tried to remove the screw inside - it was frozen and unremovable - someone must have really tightened that sucker down - but that's obviously not a problem caused by this product. I was able to make a modification that should work. BUT - when I tried to use the adhesive to reseal the headphone case, I discovered that the GLUE HAD ALREADY HARDENED IN THE TUBE. I even cut the tube open to verify this. Amazon said they would have problems sending a replacement (???? I understand they can't send just a tube of adhesive, but I could go on the site and order another whole kit right now), and they offered to "contact the seller" (made in China - good luck), who they said might take 4 days to respond. They finally gave me a refund and now I will need to find a local hobby shop to find a suitable adhesive (I don't want to epoxy it just in case I need to repair it again).

This kit was exactly as described and the instructions were detailed and correct. My Powerbeats fit perfectly now without a concern of a bud falling out of my ear. Just be prepared to do a little work in getting the old screw loose.

Pretty easy to change the earpiece loop. Watch YouTube video. Use heat gun (HOT hair dryer) to heat up case; pry open with Jeweler's screwdrivers or dental pick tool. Scrape off old glue from mating surfaces. Carefully peel back the layers until you can see the screw holding the earpiece end in the socket. Remove screw. Clean out old nub. Put in new earpiece in socket, screw it down. Use supplied SuperGlue E8000 on edge of case. Reinstall guts carefully. Put case back together; wipe off excess glue; and hold together with a clamp or 2 for a few hours. Loop is a little more flexible and a slight shape change from original, I like it better. Took me like 20 minutes to do it first time no experience at it.

Very easy to install and very good quality

Mis powerbeats necesitaban ésta refacción para revivir, por suerte lo encontré aquí.

fixed my earphones

Problema resuelto cambie el gancho roto y el otro también quedando muy bien y funcionales

With a little patience I managed to fix my earphones. All tools included worked well. Happy to fix rather than exchange.