Crystal Clear UV Resin 8x30ml with Foldable Lamp & Tweezers with 48 Holographic Glitter Sequins Multishape for Resin Jewelry Making DIY Pendants Earrings Keychains Necklaces Nail Art Accessories

الوصف

Color:Set 1 Package includes: 8x UV resin 1x USB-powered UV lamp (with USB charge cable) 1x Tweezers 48x Holographic sequins multiple shapes Brief instructions: The use of the resin is very simple. It can be cured under UV lamp or UV torch (about 5-10 minutes, we recommend to add & cure the resin by layers, so that the curing time will be shorter). Also you can cure it with the sun when the sunlight is strong enough, taking about 35-60 minutes. When the weather is cold, it might take a bit longer. We recommend the use of gloves when using the resin just for easier cleaning. Directly pour the resin in the mold or the bezel and add the pigment, glitter, dried flowers or anything you want in it using a toothpick or tweezers and cure the resin. When you add pigment in it, make sure you don't add too much at one time, gradually adding the pigment is recommended. It's possible that there are bubbles in the resin, for example, when the dried flowers you put in it are not dried enough. How to avoid bubbles: 1. UV resin should be poured in silicone molds in layers, allowing air bubbles completely escape. 2. To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up. For example, heat the oven to 80℃(176℉), turn off, ventilate it a little and filled the mold with the resin. 3. Before using the resin, place it upside down to prevent air bubbles from escaping during extrusion. 4. Use a toothpick to concentrate the air bubbles on the surface of the resin. Puncture them with a pin or undo them by applying heat with a heat gun or a lighter. If you have any other problem about using the resin don't hesitate to let us know.