DEWALT Tool Box, One Touch, 24-Inch (DWST24082)

This remarkably tough 24" toolbox is an extremely useful, excellent value. I can easily fit my drill in the large basin bottom, along with work gloves and my larger tools. This allows plenty of room for the tray above it, which can be lifted out or slightly slid to the side, using its handle. The chunky but just-right exterior handle of the toolbox has a comfortable rubbery-grip texture where fingers hold it. It has a sturdy spot to add a padlock, if needed. One of the best parts is actually the single but large metal easy-lift spring handle, made precisely so that it's convenient to open it with one hand alone while I have items in my other hand. Even better is how it closes and latches (because of the spring), just by giving the lid a little elbow bump to close itself, so I could have tools in both hands and not have to set anything down to latch it. Especially for a DeWalt item, and for the size, this is a proud bargain find and would make an excellent gift as well.

I needed to store a set of tools and supplies for professional photo mounting and framing which has both small and some rather large tools. I specifically needed a toolbox that had a removable top tray, but not the conventional arrangement where it stretches all the way across the box or only leaves a small opening along the front edge of the box and this was the only box I could find that had the tray that only covers half the box which allows me plenty of space to store all the smaller items above and below but then leave the other half of the box to store all the larger tools that need the full interior height of the box. Thankfully being the only one that fit my needs, it is also excellent quality and very durable which would easily stand up to much heavier use than what I am using it for. The large but simple front latching system is also great compared to the old fashioned latches on either side, this is simple to quickly open with one hand.

This tool box is a really good box. I keep most of my cordless tools in this. I really like the fact that the latch for it closes automatically. You don't have to snap it back in place once you close the lid.

I started off with a basic Home Depot toolbox that served its purpose well for a couple of years, but eventually, the hinge broke, making it a hassle to open, close, and keep secure. I decided to replace it with the DEWALT One Touch 24-Inch Tool Box, and I couldn’t be happier with my decision. This toolbox is significantly larger than my previous one, allowing it to hold all my tools and then some. The lid opens and closes securely and easily, thanks to the one-touch design. Additionally, it features a handy little compartment on the top for quick access to smaller items. Overall, I highly recommend this tool box. It’s durable, spacious, and well-designed, making it a great upgrade from any basic toolbox.

This was perfect for the back of my 54 willys jeep. I have a jeep for wheelin and had a back seat in it when I bought it. I took the back seat out and there were two brackets mounted to the floor boards. those are 24 inches apart so I bought this box thinking it was about 24 inches (because of description) It was a bit small I would say between 20-22 inches so it didn't fit perfectly, however I was able to use rubber bungee cords which fit perfectly. We did a very hard 5 hour wheeling trip and it stayed in place, never broke and I was able to carry all my (pink) tools in it that I need to help fix a few break downs on the trail. This is a plastic box, however it is super thick and very rugged. It has a very nice snap on the front to close it and lock it in place and it seems very very secure as far as not letting anything in. It was the perfect size for what I needed it for.

This ruggedized tool box has been around for at least 12-13 years and hasn't changed across the black and decker conglomerate tool brands. I purchased the 28" Stanley Fatmax version, which also had the waterproof seal, back then for my general purpose home tool box and it's still as good as new. After moving into the new 50 yo home, I had all facets of new tools that I needed to purchase for modernization during improvement projects, including electrical and plumbing tools, drywall tools, and tile tools. I wanted smaller, task-oriented tool boxes that are ready to use to cut down on all the back-and-forth trips for forgotten tools from the garage, and these Dewalt version tool boxes are perfect sized just for that. I had checked prices and availability at the local Lowes', which supposedly had them, but instead had the Craftsman version at the same pricing Amazon has set for the Dewalt version. The Dewalt version was $35 in store, but they of course didn't have them out on the floor and I didn't want to deal with Lowes' subpar customer service associates that disappear when you actually need help, so I bought them from Amazon instead and saved a couple bucks. You can't go wrong and I easily can recommend any brand of this style tool box!

I bought this case to store several power tools that didn't came with a plastic carrying case. I was worried they might not fit with the plastic tray in place but I was wrong. It easily accommodated my jigsaw, a ryobi angle grinder, a dewalt hammer drill, the handle of the drill and the one for the grinder, a set of masonry drill bits in its case plus more. And still I was able to put the tray on with plenty of space below. They pics show how it all fits plus I measure the dimensions inside to give you a better idea on how big it's inside. When closed it seals very well without any flexing like most cases. It's water resistant so it can survive the rain, splashes of water, etc., but definitely the contents won't survive if the case is submerged completely in water. One person asked if you can stand on it, well in my case yes I can stand on it as a step but obviously how the case can withstand that will ultimately depend on your weight, it's a sturdy case but it's still plastic. Overall I'm satisfied with it, Dewalt never disappoints me.

So if the top tray isn't exactly horizontal with the box it'll fall in. There is also a cutout for said trays handle that'll let anything smaller than a screwdriver fall into the bottom. Really neither are a big deal to me and I love this box. Imma fatty fr and even I can sit on it, I'm talking 3 fitty. The latch is strong and easy to operate and it's pretty big. I got it 04/23 for $25 and it was a hands down steal for that. For the now $32 on 10/23, I may look around a little more but for what I dunno. I'm thinking something around the $15 range and a step or 2 down from this.

Perfect fit for the carrier on my Skidoo Skandic. Good latch mechanism.

Es una caja muy útil y de una buena construcción, es bastante resistente, soporta mucho peso por dentro y demás puede servir como un escalón, puedes pararte sobre la tapa y resiste muy bien Como se ve en las fotos que adjunto, lleva bastante herramienta En total 4 taladros, grapadora, sargentos, extensión y diversos accesorios Tiene una Charola que cubre poco más de la mitad, lo que para mi es conviniente Un detalle muy padre y que me gusto es que el seguro se pone con solo bajar la tapa y ya al instante se puede levantar toda la caja ( como se ve en el video) sin poner más seguros y con solo jalar la pestaña de metal se abre, es práctico Resiste transportarlo incluso bajo la lluvia Tiene un sello en la tapa que no permite que entre agua Muy buena y practica caja

Perfect size box for my bricklaying tools tote tray inside as well I think you can only get these from USA ,so if you see one on Amazon get it I was lucky £50 post and packing included well pleased with it great bargain

Es caja muy resistente y de material que te permite sentir lo robusto que es, realmente pagas por algo que vale la pena, sin embargo un par de detalles, una es la charola para mi esta ok pero pienso que de manera global a mucho les quedará pequeña, ya que al ser corta a mi gusto permite deslizarla para poner objetos que necesiten un espacio mayor en cierta parte de la caja, otro detalle es que si metes mucha herramienta podrías llegar a hacer que se deforme ligeramente la cuadratura de la caja y eso propicia que cuando cierres la caja no caiga automáticamente el pasador de por lo que debes de empujar sutilmente la tapa para que encaje, si esta todo correcto dentro de la caja el pasador cae sin problema( ese sistema de cierre es muy práctico y la tapa al abrirla toda no se va hacia atrás).

There is nothing not to like about this toolbox.