MIRA SAFETY Full Facepiece Reusable Respirator, Respiratory Protection (2 MIRA NBC-77 SOF FILTER)

I’m an Army combat veteran with 4 tours in Iraq, and somewhat of a gas mask collector. Within my collection, I own the following:- MIRA Safety CM-6M- MIRA Safety CM-7M- Drager CDR 4500- Drager X-plore 6300- Drager DHS 7000- Drager FPS 7000- 4A1 Israeli Civilian Mask- Israeli Military M15 Mask- Mestel SGE 150- Mestel SGE 400/3- Mestel SGE 400/3 BB- Russian M-10-M Protective Mask- Avon M50 MaskI originally wrote a version of this review for a Drager mask I purchased and it got a lot of helpful votes, so I figured I’d expand on it and go into detail about the MIRA CM-6M, while giving some background about the other masks I own. Considering the many options, it’s important to know what the mask is intended for, and the level of protection it offers.The focus of this comparison is for CBRN applications (chemical, biological, radiological, nuclear). Keep in mind, that a gas mask is only one component of CBRN PPE (personal protective equipment). To minimize exposure during a true SHTF scenario, you also need coveralls, gloves, boots, and Chemtape to seal up the seams. Along with that, you would need a decontamination agent such as FAST Act for equipment, and RSDL for the skin.Also keep in mind, that you need to make sure the filter cartridges you purchase are made for CBRN applications. To be a true CBRN filter, it should have a rating of “A2B2E2K2HgSXP3 D R Reactor”. There are many filters on the market which cover “A2B2E2K2HgP3 D R”, but very few that also cover SX and Reactor. SX is for a few CWA’s, and reactor neutralizes radioactive iodine. The MIRA NBC-77 SOF filters cover all the bases.Anyway, onto the review!--MIRA Safety CM-6M:PROS*Compliant under EN 136 CL3 standards for respiratory protective devices.*Large visor with a very wide field of view.*Made from butyl rubber which meets material specifications for CBRN protection.*Has a silicone inner mask to prevent fogging, and is hypoallergenic.*Comes standard with a speech diaphragm.*Comes standard with a pre-installed drinking system and external canteen.*Compatible with CamelBak water bladders.*Fits standard 40mm filter cartridges, which are widely available.*Fits up to 2 filter cartridges simultaneously, increasing the time you can go without changing filters, and making it easier to breathe under physical exertion, or for people with smaller lung capacities (kids).*Used by governments in Europe and the Middle East.*Not ITAR or EAR controlled as they are produced in Europe, so they can be shipped to friends and family overseas without a mountain of paperwork.*Long shelf life of 20 years.CONS*Has a slight rubber smell. In all fairness, all butyl masks that I own also have some rubber smell, just figured I’d mention it just in case someone reading is very sensitive to this.*It’s not NIOSH CBRN Approved so it would limit professional use in the USA (Most government agencies require NIOSH CBRN approval for respiratory devices as part of OSHA standards if using the mask as part of your workplace PPE). Definitely great to have, but having or not having this certification does not determine quality, just means it went through and passed a certain series of tests here in the US.---MIRA Safety CM-7M: Very similar to the CM-6M, but made for tactical applications and military personnel. This is the mask currently used by the Czech military. There are 2 visors that are recessed to offer better optical relief for use with scoped rifles.Drager CDR 4500: Fantastic all around mask that I have now designated as a preparedness backup after my CM-6M and DHS 7000. The lack of a drinking system made me seek out other options as gas masks get pretty stuffy, and taking off the mask for some water while getting out of dodge may not be an option.Drager X-plore 6300: The structure of this mask is identical to the CDR 4500, with some slight color variation. The major difference is the rubber used for this mask is not NIOSH CBRN approved. However, It does have a NIOSH rating for use against many gases, chemical agents, and particulates. This mask holds an EN 136 CL 2 certification.Drager DHS 7000: This mask is absolutely incredible, although extremely difficult to find and prohibitively expensive. From all the masks I own, it’s definitely my favorite. I found one that was used for around $500, and they sell new for about $800. You can use it with one of 3 configurations: an RD40 filter, a PAPR, or an SCBA. If you can find one and have the cash, buy it. For basic CBRN preparedness purposes, however, it’s definitely overkill.Drager FPS 7000: Great mask that’s EN 136 CL2 approved, but it is not meant to protect from CBRN agents, and only works with an SCBA system.4A1 Israeli Civilian Mask: Sold mostly in surplus stores and can be picked up for under $30. Visibility is poor considering the small visors, one for each eye. Many people in Israel have this mask in case of emergency, and I’m sure it’s saved lives over the years, but I would not trust it considering most are surplus and could have been sitting around for 20+ years. This mask is not rated for CBRN purposes. Also, do not use the supplied filter as most are long expired.Israeli Military M15 Mask: Similar specs to the 4A1, but with bigger visors. These do expire (20 yr life), so keep that in mind if purchasing. I’ve owned 5 M15 surplus masks over the years and 3 had damaged valves, leading to a return. These masks are resistant to certain warfare agents, but not the full gamut. I would recommend looking up the spec sheet for more detail.Mestel SGE 150: This mask looks really nice, but is not intended for CBRN purposes of any sort. There is no coating on the visor against chemical irritants, and there is no CBRN certification. Primary use for this would be against tear gas, pepper spray, and riot situations.Mestel SGE 400/3: Same as the SGE 150, but with 3 filter ports instead of one. This mask also has a few optional accessories. Retail is around $200, and can cost upwards of $400 when fully loaded with accessories (speech diaphragm, drinking module, canteen). If you want the extra accessories, you either have to buy it pre-installed or send it back to the factory for professional installation which could take weeks. This is a great mask to block tear gas if you’re stuck in a riot but is not intended for CBRN applications.Mestel SGE 400/3 BB: Same as the SGE 400/3, but has a rubbery butyl seal, thus meeting material specifications for CBRN use (usually $50 more than the standard model).Russian/German M-10-M Protective Mask: This mask is outdated and not fit to be used for CBRN protection. All it’s good for is a Halloween costume.Avon M50: This is the current military issue mask for the US, and is a quality piece of equipment. There are a few caveats, however. The M50 uses proprietary M61 filters which are very difficult to find un-expired. As Avon only sells these masks and accessories to the military, 99% of the filters on the market are expired surplus. Also, the military generally only disposes of M50s that are defective or expired, so I would only recommend purchasing if you can get one in a sealed box, with the included instruction manual. As another reviewer mentioned, if the valves on your M50 are clear, the mask is defective. So long as you get a sealed mask with unexpired filters and functional values, it will work very well for CBRN applications.Also to note, these are also ITAR regulated and cannot be exported out of the country.Conclusion:In my opinion, the MIRA CM-6M gas mask, coupled with the MIRA NBC-77 SOF filter gives you the biggest bang for your buck for a CBRN mask. It’s used for civil defense to protect government officials all over Europe and the Middle East, meets material specifications for protection against CBRN threats, comes with a drinking module, canteen, and a speech diaphragm. The large visor makes it easy to see through, and the inner mask prevents fogging. Both the mask and filters have a 20-year expiration, which blows the standard 6-year shelf life for filters out of the water.A comparable mask from Drager (DHS 7000) would cost ~$750, one from Mestel (SGE 400/3 BB with Infinity Drinking System) would cost ~$400, and an Avon M50 mask would run you ~$600 with all accessories. Considering the massive savings, this mask is definitely my top choice for preparedness on a budget without sacrificing features.Hope this helps!

I work as a law enforcement officer in Southern California so being prepared is part of my job. I purchased a set of these filters because it’s one of the only true CBRN filters available to the civilian market. They are rated for A2B2E2K2HgSXP3 D R, with a Reactor element as well. The letters stand for the different classes of contaminants, and the numbers next to it show which concentration of these elements the filter can handle. I attached some pictures that help break this down.I have not used these filters, and hope that they sit in my patrol car for the entire 20-year shelf life untouched. But, if they need to be deployed, I feel much better about having a product that covers everything as opposed to just a few different gases.

The internal straw was not air tight if you want to get gassed used this mask. will not work as intended.

We used it as a family while visiting relatives in California. It was so much smoke that it was impossible to breathe. Mask is very comfortable and fits my 10 year old. With a combination of Mira filters it worked well. It is reusable and made of bromobytul rubber which is rare component for survival masks. The great surprise is that it is also certified cbrn mask and filters have a 20 year life shelf.

I was shocked to see that this filter was manufactured in the same month that I received it. It’s not going to expire until October of 2039. I couldn’t be happier knowing that I don’t need to replace it after just a few years.

You pay a little more for these gas mask filters, but they last a lot longer and are rated for CBRN protection. Standard filter cartridges last 6 years and cost an average of $55. Over the course of 20 years, I would have spent $150+ to keep them fresh and up to date

Great fit. Quality product. I have a military issue mask that cost $800+ and this one is just as good. Great price.

Well, used this as Halloween costume (along with the Soviet gas mask and Geiger–Mueller counter) - worked way above expectations.Highly recommended :)

Great product great quality.