Guyker 6Pcs Guitar Locking String Tuning Pegs (3R + 3L) – 1:15 Vintage Deluxe Style Tuners Key Machine Heads Set with Keystone Knob Replacement for Les Paul Style Electric or Acoustic Guitar - Nickel

These fit perfectly on an Epiphone LP Special, look fantastic, tuning stayed tight after an hour live set. I’m heavy handed and was playing some heavier rock. I was on the fence about these but they are awesome!

A bit worried about buying these after reading some reviews, but glad I took the chance. They look nice, not great, but good enough for my $200 Epi Les Paul Special, a HUGE upgrade from whatever crap tuners were on it from the factory for sure. Installed easy (you will likely have to drill the holes a bit larger if your tuners have the push in ferrules and not the screw in type, if that is not what you want, you need a different set of tuners with the push in ferrules). They are a bit inconsistent in the resistance of turning the knobs, but not too bad and may free up a bit over time (they are a bit stiff, but I'd rather them be stiff instead of lose). The sting locks all work well, but remember these are not high precision, so keep your expectations realistic. If you want Grovers, buy Grovers. These will probably work like true locking tuners will if you take your time, but I left a bit of string so I could wrap the sting at least once around the peg after locking and I did not overtighten the locking screw as the treads are not as precision looking as higher quality tuners. Again, for under $30, I'm impressed. They look good, function better than expected, and give the old Epi a more vintage style look. I would not put these on a Gibson, but for a cheap Epi or equivalent, they are more than adequate and I'd buy them again.

Well made,perfect for upgrading guitar although it still goes out of tune just sitting.

I needed to replace some broken tuners on an Epiphone SG and these fit perfect! Very easy easy to install and they seem to be good, solid quality tuners, great value for the money. So far the tuning stability is holding up fine. Their color though is a little closer to green than in the picture, but my son didn't mind since the guitar is also green, but just a note if you happen to care about the color.

My second set of these and I love em! Ordering more soon I put them on all my budget Les Paul’s. Great quality over all with no sloppy pegs. Tight and smooth! Tuning stability is night and day and they look amazing! Not much heavier than the old ones.

From the start there were issues. It claimed to be 9mm shafts but I had to open the holes to use these. Next, I could not keep the locking shafts tight. Eventually, one backed out and was lost, so I just removed the rest to stop the aggravation. Next, a plastic key came off. They are not screwed into the peg, like most tuners. Its just a press fit, and obviously not hard to come off. Most recently, I discovered that without the locking shafts, there was nothing holding the rear cover and tuning jackscrew in place. One popped off and now that I have lost what I did with the five shafts that remained, I have nothing to keep the cover and jackscrew in place. I hate to spend even more money on a cheap guitar, but I should have spent the extra $20 bucks for a higher quality product. Buy once, cry once. These tuners are tearjerkers.

They do the job well and hold the strings tight. They fit perfect on my Epiphone nighthawk, didn’t have to make any mods.

Guyker locking tuners fit my Epiphone ES 339 pro perfectly. The existing holes in the headstock we’re the size needed to fit these new tuners. And most importantly the spacing of the holes that allow you to screw down these new tuners to the rear of the headstock were perfect. It took no time at all to install these. I had read some reviews about these tuners being hard to turn and the locking screws not working properly. Mine seem to turn fine although I did turn both the tuner pegs and the locking screw many times to make sure there was no problems. I also put a very small amount of 3-in-1 oil on each to make sure they would work smoothly. I use the Billy Gibbons 7 gauge strings on my guitar and had no problems with the lockers holding on to the strings. Even the very thin high E string. I have had them on for several days now and have no problems holding the strings in tune. I had tried to get some higher end tuners but they are sold out almost everywhere. When I saw these for approximately $20, I thought what could I lose. The Kluson locking tuners are 19:1 ratio compared to these at 15:1 but that is still a little better then the stock Grover deluxe. So far I am very happy with this purchase.

This will not fit for guitar heads with 6mm hole. This will work for guitar with 10mm hole. As it is shown in the size diagram. Before ordering --- Check the size; Remove atleast one tuning key from your guitar, check the tuning peg hole size using Digital Caliper or a ruler. Along with this, it is also better to measure the dimensions, the screw hole distance etc.

La dureté des mécaniques est TRES irrégulière. Certaines tournes très bien (voir trop sensible), d'autres c'est quasiment impossible de faire tourner la mécanique. Grippées. Le mécanisme de verrouillage est très bien, les écrou de montage également.

Always good quality and 15 to 1 ratio keeps tune, Locking wheel is easy to use

Una de las clavijas originales se rompió y decidí reemplazarlas por éstas, la calidad del material a primera vista es descente, en cuanto a afinacion seguiré probando de momento no desafina demasiado, (también compré puente flotante de la misma marca y de momento parece estable).

Very nice upgrade. Recommend. They look great and tune as expected.