✨ Upgrade Your Cabinets, Elevate Your Style! ✨
The Cosmas161-319ORB Oil Rubbed Bronze Cabinet Bar Handle Pull combines high-quality solid steel construction with a stunning oil rubbed bronze finish, measuring 14-1/8" in overall length and designed for 12-5/8" hole centers. Each pull comes polybagged with 1" mounting screws included, making installation a breeze.
L**S
Very well made
I have been looking to change the kitchen cabinets pulls and I found similar ones to these ones at a high end store, but they were expensive compared to these so I decided to give it a try based on other reviews. I am so happy i gave them a try, they are amazing, excellent quality and they look amazing in my kitchen.If you are hesitant about these, believe me, you are not going to regret it. I recommend them.
A**R
Eight years later, still looking great.
I bought these back in 2014 for a kitchen remodel we did. These handles were more attractive and yet only 1/3 of the price of what I saw in person at cabinet stores. I took a chance and ordered them and was very pleasantly surprised as they are even better than the pictures. These are really solid, sturdy and attractive. They are a perfect match for our Mission style custom oak cabinets. And eight years later, they still look perfect.
M**.
No regrets
Love, love, love these handles!! They have a nice heavy weight to them and are a much better quality over the what the big Box Stores sell. I'm very glad I took the chance to try them out.I included a picture of the silver handles I installed 20 years ago and have hated since day one. As you can see, these oiled bronze handles are a major improvement and they are twice as heavy. Not sure why I waited 20 years to change them but I'm really happy I did. Don't think I could have found anything sooner that I like this well.Now to the only problem I had when I put them on. My dear sweet, percision minded husband gave me zero wiggle room with the holes he drilled originally 20 years ago. When I tried to install my first handle, they were just a smidge too long from center to center. I read on the box that they are 76mm and in our world we needed 75mm since that is 3". My heart sank thinking I would have to redrill with larger holes since I'm on the lazy side. Husband to the rescue: he discovered there is a set screw holding the handle to the screw stems and a 2mm hex key fit perfectly. All I had to do was break the screw loose and 1/2 a turn later, there was enough slack to install the handle on 3" handles without any problems. They installed nice and tight also, no looseness in any way.I also got the matching handles for some smaller drawers and they really complete the feel. An added bonus is no matter how nasty dirty the kitchen gets, I still have awesome handles and knobs that make me smile.
R**C
Nice solid pull-knob...
So we ordered 6 of these and will be using them as curtain ties-backs (yes, yes, I know these are cabinet knobs but the size and shape are perfect for what we wanted). In order to figure out how to mount a knob straight to a solid post, we had to see how this was put together. Obviously its pretty small so should be simple. Well, I here to say it is. See the our image of the piece taken apart for some idea.There are 4 parts, the rod, the rod holder (cabinet standoff), the set screw (little black screw) and the cabinet mounting screw (silver screw). First, we noticed that our cabinet screw only went in a 1/4"... that seemed odd. So we looked a little closer and saw the set screw. Well we took that out and voila... the rod fell out almost immediately. Looking a little closer we saw that the pin head of the set screw had missed the pre-drilled hole to sit in. There's a small dimple in our rod but it's covered by the handle collar. Reseating the set screw into the rod not only made the rod a little straighter but also allowed for the cabinet screw to go nearly all the way in (1/4" stuck out or so). So that's the rod... if your's isn't straight or seems really lose, check the set screw and it's positioning.Aside all that, we now know how we're going to mount the rod/knob to a post/wall where one can't get to the backside to use the cabinet screw. Simple solution... HANGER BOLTS They have a fine machine thread on one end and coarse wood thread on the other. Something like this 5/16'' -18 x 2'' Steel Hanger Bolts, 8 pack Now I just need to find the right thread size and we're all set. I'll run to HomeDep0t to figure that out and and the size needed later for other peoples reference.edit:K, found the Hanger Bolt to match: 4317-E (20) - 8-32 x 2 Hanger BoltsAn Amazon Item that matches it: 8-32 x 2 Hanger Bolt (20 pieces) edit 2015-03-21:finally remembered to snap a couple photos of how we have our knobs mounted. Curtains aren't in the photos because we've got them in the wash... got a little wet during the winter months here in Washington Stateedit: 2016-05-11wanted to just add a couple of photos that show the knobs and how little they stick out compared to the surroundings...
C**A
Absolutely Stunning!!!
If you are on the fence about buying these, buy them! The quality of these pulls far surpass what you can get at a big box store and what an amazing difference they made for our kitchen in the new house! I was a bit worried they would be “too rustic”, but they brought out the rich quality of the wood and completely transformed the space. We are over the moon happy with them! We bought 50 of them, and used all but one. Some might need a slight adjustment, as they might look a bit crooked....this happened on 2 out of the 50 and were easily twisted to straighten. We did also need to use longer screws for the drawer pulls, but that was completely expected and definitely worth it! We just ordered 2 10 inch pulls for our longer cabinets directly from the company as they weren’t on Amazon and they shipped very quickly. Do it! You will not be disappointed!
J**S
Perfect update!
Got this cabinet at an estate sale but really wanted to change the outdated knobs. These are perfect, I will most likely buy more for my kitchen cabinets! Easy to install and seem sturdy so far!
A**R
Well I am disappointed
I am disappointed because I have this lovely hardware but can't install it because the screws that came with the hardware are too short and I will have to go out an buy screws before I can install. Very frustrating and there must be a standard size and length attached to factory cabinets so why not include two different length. So for the price not satisfied ...if I wanted to go out and buy my hardware I would have done it. I wanted it delivered to my home and be able to install right away,
T**E
Excelente producto!!
Excelente producto muy alta calidad.
G**N
Good quality
2 of the 15 were loose and garbage but the rest were good
A**R
Door pulls
Went well with wife's cabinet make over. Looks really good. Came in good time and good value
M**U
exelentes!
muy buena calidad me encantaron!
ترست بايلوت
منذ يوم واحد
منذ أسبوع