Apoxie Sculpt - 2 Part Modeling Compound (A & B) - 1 Pound, White/Stone White

Great product. A bit expensive and hard on the hands, but that applies to all epoxy clay. Follow instructions and wear when using (learned the hard way)! Sanding when dry only yields moderate results so make sure to smooth as much as possible before hand. Takes a little practice but results are super. Will buy again and again.

Used for customizing my tabletop war-gaming miniatures and repairing damage to resin figurines and sculptures. It works like GreenStuff if you are familiar with that. mix part A and B and then you have some time to sculpt it into whatever you want. As it cures it goes through various stages of workability. It will be a little more sticky early on and then as it firms up you will be able to using sculpting tools to create all sorts of detail with finer details being easier early on and smoothing being easier a bit later. Once cured it is very hard and can be sanded or painted. Between this and some model paints I've been able to save quite a few little resin figures that got chipped when they got knocked of their shelves. When done well the repairs are barely noticeable and very well adhered to the original piece. Once cured it lasts forever and doesn't discolor but stored in the tubs I've noticed that my part B developed a yellow orange film where its exposed to air. Part A has no problems. They still both work even with the yellowing of the top of the part B stuff but even after over 8 years of having the tubs the stuff under that top yellowed layer still looks fine.

I don’t know why I didn’t try this stuff sooner. Use it to customize my action figures and it works great. A lot better to work with than other options. The price could be better but I think it’s still well worth it.

Apoxie sculpt is great you can use it for a million and one things it's a two-part epoxy that you mix together and my opinion you really don't have to wear gloves just know that it's going to be sticky at first when you start sticking it together it will start getting warm in your fingers that means it's curing it's able to be smooth out with water which is awesome and you can fix and model things with it it's the best two-part epoxy out there I would buy it over JB weld any day that's also waterproof once it dries you can sand it you can carve it you can paint it. I highly recommend this product and it lasts a very long time as long as you keep it away from the air

I know, people here think that this stuff is expensive. And that is because they are ARTISTS, not BOATERS. Wait until someone take the same product and puts it in a box written "marine" on it, you'll see. For a boater, this stuff is a hidden gem. I was looking for a better alternative than the overpriced marine-tex and other crappy epoxy available in the marine world, not even because of the price, but because of: 1/ the crazy toxicity of the marine products 2/ the ridiculously short working time 3/ the hard to smooth, impossible to shape texture 4/ the necessity to sand forever after it dries (because you couldn't get it perfectly to shape). 5/ the waste of half of the product on the mixing surface and mixing stick, and the other half while sanding the excess (yes, I know, that makes 100%. I'm exaggerating, but just a little) THIS PRODUCT IS A MIRACLE. Let me list here the amazing benefits of this product: 1/ it is epoxy. This means super strong, waterproof, UV-resistant, can be used inside, outside, underwater, under the water line, on wood, on fiberglass, on metal, on whatever you throw at it. Epoxy rules. 2/ it is EASY to mix and work with. As easy as play-doh. 3/ it is VERY EASY to smooth/shape/blend! just put soapy water on your finger and it becomes a magic wand. you can blend pieces together, smooth them out, just by passing a finger on top. Crazy. 4/ there is a GREAT working time of over 2 hours. No rush, mistakes can be corrected easily. 5/ there is virtually NO WASTE, as every little piece of it can be collected and reused (within the 2 hours). This makes this product infinitely cheaper than any other epoxy mix, where the waste is the major part of the product. 6/ it doesn't create an expensive mess. It is easy to clean, easy to apply, easy, easy, easy. 7/ it SAVES A TON OF TIME. The ability to smooth it, reuse it, cut it, modify it, work on it without rushing, makes it possible to create a finish product in one step, with no need for sanding, no need for cleaning (both can be very time consuming with regular epoxy / fiberglass). 8/ it is NOT TOXIC like other epoxy! No crazy fumes when mixing, and the product won't burn a hole through your hands if you hold it. In fact, you can be in direct contact without feeling anything, and cleaning your hands after is a breeze. No more working with a respirator and gloves! As a disclaimer, I'd say that I don't know for a fact that it is not toxic, but it doesn't feel or smell toxic in any way. If you've been working with marine-tex, you'll know what i mean. 9/ Of course it dries by itself, which is normal for an epoxy, but I guess that if you're an artist, you care about that (as opposed to clay). This stuff is my new religion. Seriously. One thing, though: it is NOT WHITE. it is a light shade of gray, very pleasant, but not a white. However, it is epoxy, and can be tinted, painted, stained, varnished, whatever you need to do to color match (which is always necessary anyways, even for white on white). BOATER FELLOW, DIYers, Homeowners, BUY THIS STUFF! As for artists, I don't know how it compares to other products, but my guess is that it will be pretty hard to beat this champ.

Best two part epoxy resin out there. sets rock hard and is drillable, sandable and can also be tapped if needed. Great for small repairs and also full model builds.

Great

Merece cada euro que se paga por ello. Genial para esculpir, sea lo que sea. Tienes un tiempo muy decente de trabajo antes de que se seque y así poder corregir cada error. Es epoxy, es decir, es super resistente y se adhiere a cualquier cosa. No se malgasta porque coges y mezclas lo estrictamente necesario, es casi como plastilina y además no es tóxico como cualquier otro Epoxy. En serio, merece la pena comprarlo.

Je m'en suis servie pour customiser une pop DIY et c'est tout simplement parfait ! Facile à travailler. Par conter, ça sèche vraiment vite, il vaut mieux faire plusieurs séances de petits travaux pour éviter d'en jeter. Mais vraiment, le résultat est top et la peinture adhère bien dessus !

Mi diletto nel restauro e ho trovato questo prodotto veramente eccellente : molto duttile da lavorare quando è fresco e perfezionabile con qualsiasi strumento quando si è indurito.Il risultato per me è stato più che soddisfacente. Si comporta esattamente come da descrizione. È un po' caro ma vale la pena provarlo.