GE Rocker Dimmer Switch Rocker On Off Light Switch Dimmer Switches for LED Lights Single Pole or 3 Way Dimmer Light Switch Energy Saving UL Listed White 10464

Swapped this into a 3-way setup using the included diagram and had no issues. You’ve got four wires (two red, one black, one green), and as long as you match up the COM wire correctly, the rest is plug-and-play with wire nuts. What I like is how clean the rocker looks — no clunky dimmer dial, no weird LED glow, just a soft fade-on with a single tap and a smooth slide when you want it. Perfect for pairing with recessed lights or LED trims in a modern space. This replaced an older toggle switch and instantly made the wall feel more finished. Also, bonus points: it doesn’t buzz. That’s a must. Wiring was straightforward even with older copper. I’d recommend taking your time to trace which wire goes to the common terminal first — that’s the only step that matters. Simple, minimal, and does the job right. — Curated by Jaded John | #OrderlyCleanDesign

Easy to install, and it works well. One thing I think can be improved is to better explain the switch between Setting, C and L, and how to set the minimum lighting. I don't see any difference. This is why I call it robust.

The dimmer works fine, but there is a fraction of a second between turning it on and the light coming on. It’s just enough to make you wonder if it’s working. The instrucks are also a little small and lacking. They don’t tell you that you should not wrap the wire around the screw, but should stick it in the associated hole and the tighten the screw to connect the appropriate wire.

The best dimmer switch

Easy replacement for an older dimmer switch. Contacts are solid and build quality is not a problem.

This was a replacement for another brand switch that only lasted a couple years. The other brand was slightly easier to install but this one has better features like a very nice dimmer slide and a small light that illuminates when the switch is off which is great to locating in the dark. The other benefit is that works for single or 3 way switch applications. Great price.

Great little summer, and I like the fact you can keep a dimness level set when you turn on and off. The only issue I have is that I have the switch hooked up to 3 Maxxima 6" thin LED ceiling lights, while it works very well, no flicker or anything, it dims them very well; it's just that last 3rd of sliding the dimmer to the lowest setting (which works fine and perfect) it will not turn on at that lower setting. Once I slide it past halfway to full, it works fine in and off. It's a minor thing, and I think it it's because its connected to very low power LEDS, so not really an issue since the dimmer works fine, it's just the in at the lowest display setting not working, but again works fine as soon as you slide it up.

I bought this item because I thought General Electric products are generally well designed. This particular item is not up to usual GE design standards. There are four things I dislike about this product, which replaces an old dimmer switch that's been there for years, which has begun to produce flickering light. The four things I dislike are as follows: [1] The post that the dimmer knob plugs onto is too long. As a result there is too much gap between face plate and dimmer knob, which looks bad. [2] Unlike the dimmer switch this replaces, you cannot screw a standard faceplate with a rectangular slot flush with the wall, which looks terrible. This is because of poor design. At the base of the post that holds the dimmer control knob there is a 19/32" retaining nut which is too wide to pass through the 17/32" width of the slot of a standard face plate. As a result the faceplate stands away from the wall with about a 1/8" gap. Which looks terrible. The previous rotary switch did not have this problem. Replacing the original plate with one with a circular hole had one problem: the original was a special custom plate that cost a lot, carefully matched to the decor. [3] The dimmer switch it replaces was able to dim from zero light to full power. This dimmer switch will not dim to zero. Maybe this is a necessary safety feature ? Or is it just careless design ? [4] The wire ends you connect to the power wires are soft braided multistrand wire not stiff enough to work well with the stiff copper wire coming from the wall, when you twist on the wire connector nuts. Because of problems [1] and [2], I found installation a real hassle. and so am awarding just one star. I hate to think of spending time returning this frustrating product and hoping that the replacement will be as good as the old switch I am replacing. Overall a bad experience.

I have been waiting to purchase this dimmer for a long time. My dining room is very bright and hurt the eyes. Now with the dimmer, my living area and dining area look nice and cozy.

Muy buena calidad. Funciona perfecto y tiene mucho mejor precio que los Leviton

Arrived broken

L'échelle d'intensité est plutôt limitée pour la lampe branchée a ce variateur.

Easy to install. Works great. This switch is not used in a multi-switch setup.