Deluxe Carburetor Airflow Meter by Latest Rage

Shipping could have better protection. arrived in a very small blister pack. (1) The rubber cone boot requires seating in the meter gauge housing. **must have multi carb performane balance tune** after validating my quads twin carbs with this deluxe airflow meter... Intrigued to test. I was very close 5kg/h verses 3.5kg/h dialed in my right carb.. now both sync'd in at 5kg/h the idle was smoother. Very well balanced.. Works great, made a big improvement. Quality looks good, very simple design to use and compare airflow to Sync. Abolutely No air flow restriction. ** removed a spacer before the reeds re-synced both carbs 5kg/h. also sync'd a 2nd alike set-up. Both flawless results. Insane power band. Extreamely smooth idle. A must have sync tool. Or single carb to dial in the most effiecient idle. Ok price to balance ratio. Highly recommended! Slip the clutch, throw some dust. Drop a gear and disappear. Wear your helmet be observent. Enjoy your ride!

This takes all of the guesswork out of synching dual carburetors. I used it on my VW's Weber ICT 34s, and it showed me just how out of balance they were, even though they 'felt' right. Unbelievable that I went so long with them that far off, trusting in the Force or whatever. Now, I have clean and true acceleration, no overly rich side fighting with a lean side-- it is almost like having a new motor. I'd give this little 'snail' SIX stars if I could. So easy to use, such awesome results. Worth every penny!!

This Company did the right thing!!!!!!! My local package handlers must have been practicing for the super bowl because my box was not rectangular upon delivery. This is a vital tool to put the final touches on my Banshee. It has worked flawlessly and so has the company. Tool was separating at the seem due to being crushed by the local goons. Contacted company immediately and that was that. One message and today received a new replacement tool. Thank you very much. Tool worked flawlessly tonight and 60hp stock stroke is close. This bike is a absolute rocket. Wheels UP⬆️✌️

It worked better than I expected

It seemed to work really well for my banshee. I’ve never had it sounding so clean and even. The only reason I removed a star, was the lens pushed it and made it stop working until I figured out what had happened. Luckily I was able to fix it and finish the job. Definitely happy overall, but I wish it was a little stronger

Muy buen producto

Used this device to sync dual down draft carbs on a vw 1600cc engine. The sensitivity of the tool is great. I have no question that both carbs are flowing the same amount of air at the same throttle position. Also works great to check and see that the throttle linkage matches. Most of the time one carb leads the other because of the linkage being slightly off. With this little guy you can get that problem dialed in also. Don’t pay attention to the bad review of this tool that compares it to a German one. You are measuring air flow. You want a sensitive tool/meter. The sensitivity leads to fine tuning!

Worked great to monitor and balance the airflow with eight throttle bodies on a V8 engine. The gauge is easy to read from many angles. The stopper fit was a bit small but was able to still wedge into the throttle bodies and seal. A next size up would be a better fit in this specific application, though I have no complaints about how well this functioned. I think this is an indispensable tool for this kind of work.