What is the outer diameter of the threaded part, and will this sensor work with water?

Yes, it will work with water. I believe the outer diameter is 1/4" male NPT thread. That said, you can always use a bushing to adapt it to whatever you are screwing it into (e.g. make it work with a 3/8" NPT female fitting).

I want to use this for a lab experimental procedure: will I be able to retrieve the pressure data in real time?

That depends on what you mean by "real time." It outputs an analog voltage that is a linear slope ranging from 0.5 volts (or close to that) for 0 Psi up to 4.5 volts (or close to that) for the upper range of Psi per sensor (150 Psi for the one I purchased). I assume there is some minimal latency for the analog circuitry inside the sensor to convert mechanical energy to electrical energy, but on your end, as I'm doing, you'll need to use an ADC (analog to digital converter) to process the data digitally, which has its own set of latencies depending on processing speed, bit resolution, etc. For my purposes, it's close enough to real time since I'm using an arduino board with my main loop time of less than 20 milliseconds with several of these sensors, and other sensors.

Manufacturer	AUTEX
Brand	AUTEX
Item Weight	2.08 ounces
Package Dimensions	4.02 x 2.13 x 2.01 inches
Item model number	GSND-0556629788
Is Discontinued By Manufacturer	No
Manufacturer Part Number	GSND-0556629788
OEM Part Number	150 Psi
Special Features	Pressure transducer/sender/sensor compatible with oil, fuel, air, water

AUTEX

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة