ESR 2 Pack Camera Lens Protector Compatible with iPad iPad Pro11/13 Inch 2025/2024, Pro 12.9/11 Inch (2022/2021/2020), 9H Anti-Scratch Tempered Glass, HD Clarity, 3D Full Coverage

These were a perfect fit for the cameras and flash on my iPad Pro 12.9” 2020, seem of a good protective standard and have no noticeable impact on photographs I have taken with them installed; either with or without flash or with any of the lenses. The pack consists of 2 of the camera protectors, which come individually in little soft-touch sleeves. Each one also comes with a tear open sachet containing a small camera cleaning microfibre cloth, a wet alcohol wipe and a dust removal sticker; it’s a really nice touch to get two of these packs, should you ever want to remove the first protector due to it getting worn or coming loose in future and need to clean off any adhesive residue/prepare the surface for the installation of the new one. The quality of these is top notch, from the packaging and cleaning accessories to the instructions; all are really great, and the rip open sachet of installation accessories had me more excited than something that perfunctory really should. The only thing I would say is, I did need a second attempt at installing these; not the fault of the product, but, lining up all 4 apertures of the protector with the corresponding lenses/flash centrally was somewhat tricky, but definitely worth doing right to prevent any haloing/vignetting that would imaginably occur with an off-register installation of these. I don’t think there’s really any way that the manufacturer could make this any easier, I suppose you could probably use the “tape hinge” technique to line it up prior to removing the adhesive backing and then swinging it into the already aligned position, in hindsight. Thankfully though, my misaligned one was easy enough to peel off and still had enough stick to reapply properly on attempt 2. Really feels good to have the camera protected, as I find the way I hold the iPad I was previously at risk of touching it when hitting the button or even putting it away or affixing the Apple Pencil to the right side to charge. I also feel fine about lifting/putting my iPad down now, as the lens protrusion always gave me the massive fear of scratches/breaks before (even housed in a case). Couldn’t recommend these any more highly, all I would say is take your time when installing them; potentially make a tape hinge as some screen protectors’ instructions suggest to ensure you get your alignment spot on.

These did, and are still doing, the job really well. Good quality at a good price 👍

Good quality, easy to apply

My iPad Pro was recently replaced after the lens broke - despite treating the tablet with great care and having not used the camera at all. So I decided to purchase a lens protector before I took the replacement iPad out of the box. There aren’t many choices. I didn’t want a plastic cover and needed to make sure the protector would fit through the Magic Keyboard lens opening. The ESR lens protector is very thin and small enough for use with the Magic Keyboard without obstructing it. The installation is a little flimsy. I couldn’t get it to sit precisely. I didn’t want to fiddly with the protector too much as I didn’t want to risk damaging it. I can’t really tell if the lens protector diminishes the picture quality. And time will tell if this product makes for a robust lens protection. It is on the pricey side though.

Great protection and looks great, easy to fit

As expected from ESR

Job. Done

With the constantly increasing quality and feature sets of newer smart phones and tablets, protecting the lens array is now becoming essential. This 2-pack lens protector from ESR meets all the expected demands. It is 9H hardness rating which is the current standard for screen protectors. It is scratch resistant and shaped to perfectly match the lens array on iPad Pro 2020 series. It is easy to fit and allows you a degree of insurance, and optimism, that if the worst should occur, one of the most important features of your device will be protected. Whichever manufacturer's lens protector you choose, It is certainly not expensive, and it would seem almost foolhardy not to fit one to your iPad Pro. The video shows the contents of the package and how easy it is to prepare and fit the lens cover.

Gives a decent protection to the back camera from scratches and dust. A must buy product for all ipad pro users. Easy to install with all the wipes and stickers provided. Overall a good purchase but very costly ofc.

Ottima protezione per la fotocamera posteriore dell'iPad Pro 2020 (sia 11 che 12.9 pollici). Il fatto che la protezione sporga fa sì che neanche la sporgenza della scocca (e non solo le lenti) tocchi il piano sul quale l'iPad viene appoggiato.

recently purchased the SR 2 Pack Camera Lens Protector, and I couldn't be more satisfied with the product! The protectors fit perfectly on my phone’s camera lens, providing a layer of protection without affecting the quality of my photos. Here’s what I loved about them: Crystal Clear Transparency: The lens protectors are so clear that they don’t interfere with the sharpness or colors of my photos. No distortion or blurriness at all! Easy Installation: The package came with easy-to-follow instructions and all the tools needed for a hassle-free installation. I had both protectors applied in less than five minutes without any bubbles or alignment issues. Durable and Scratch Resistant: After a few weeks of use, my lens protector is still in perfect condition. It's handled some rough situations and even a few accidental drops without a scratch or crack on the lens. Affordable: For the price, you get two high-quality protectors, which is great in case one gets damaged or if you need to replace it in the future.

不器用な自分でもよく出来ました。

Je trouve que c’est esthétiquement pas terrible, fait le job, installation facile avec tout les accessoires qu’il faut !