10x 1m Lengths

A great product. I am a mediocre DIYer at best, but even I was able to make a decent job of hiding some cables with these channels and joiners. Each manufacturer of this type of product takes a slightly different approach, so don't make assumptions if you have used a "similar" product. Tips: Don't stick the channel too close to the adjacent wall otherwise there will not be room to clip on the joiner. These joiners (unlike those in some systems) have clips that go into the channel. You have to cut the channel covers so that there is a gap between sections to allow the joiners to be clipped in place. It's a little more work than the other type, but I think it results in a set up where the joiner is much less likely to get knocked off. Plastic spiral wrap makes a good transition at the end, if needed (see photo). Although it would look better if I had allowed a bit more slack.

Decent quality self-adhesive trunking. Did the job I needed to perfectly.

I've used a lot of D-line products and their trunking is excellent. This joint pack however is a bit tricky to get a good looking finish with unless you're extremely precise with your cuts so I've generally only ended up using the 90 degree corners and just ignored any of the straight joints as I've found it looks better just aligning the trunking sections directly together. If you need these for corners then they do look good but they're a bit on the expensive side so hard to recommend just for that.

Perfect

Cable trunking did an excellent job hiding 4 HDMI cables and 1 power lead, all five cables were hidden nicely. Very easy to fit as the front of the trunking unclips so you can place the cables inside and once fitted you clip the front back on, I've still got plenty of trunking left as I only needed a little. I've recently stuck green tape on the trunking to blend with the wall. Job was completed in less than ten minutes using a hacksaw to cut and plastic backing removed and placed on the wall to stick. Excellent value for money and did an excellent job.

This trunking size is good, and these joints are good.

an expensive purchase to get 2 end caps becos u cant buy them seperately !! even at most DIY stores they are always either stolen, not stocked or the shelf is always empty of these packaged parts.... u can only but the bundle pack

A+