It has a plastic or aluminum housing?

Yeah, old question, but as said above. Both the 510 and 'older but still available' 410 have aluminum housings. I've had my 410 (same gun, just doesn't take the 'narrow' flat staples or something) for a few years, great stapler. Just ALWAYS pay attention to the staple being loaded and what setting you're using. The wrong 'mode' can cause a jam that wrecks the spring loader mechanism, and ruins it...so i've read. I've never had a problem/jam so far, but always keep an eye on that. Made custom lattice for a deck 'skirt' out of strips from leftover 2x4 PT pine, was perfect for that.Not sure what Dewalt did between the 410 and 510 availability, but 410's are still on the shelf at my local HD. Some are saying the 510 was discontinued, as were the specific 'extra' staples it accepted.

How is this dwhttr510 different from dwhttr410? fyi - this part is not listed on dewalt website or product catalog.

This DeWalt 510 purchase has become a nightmare for me. Before I go into my rant, that I'll keep brief, I'll answer your question and thank you for asking; your situation answered a problem I had.The `5' and the `4' in the model number evidently relates to the number of types of staples the unit can use; as does the `sub-title' of the respective unit, ie. the 510 is `5-in-1', the 410 is `4-in-1'.The 510 accommodates the `NARROW FLAT' staple, the 410 does not.This is the problem I had that your question enlightened for me. Leading up to my purchase of the 510 I had gone to the DeWalt site for staple compatibility info. My reason for considering a new stapler was so I could trash my Swingline #800 piece of junk. However, I accumulated a full stock of staples, and wanted a stapler that would use my stock, (NOT researching it more is on my shoulders, that was the first of my problems; having faith in a `known top brand' was my second).In Home Depot I played with all the brands and styles, and was impressed with the 510's dual-pressure switch and how easy it was to compress (the 410 did not exist at the time); my Swingline #800 required 3 hands, and STILL smashed more staples than it drove properly !!!Checking staple compatibility at both Home Depot and Amazon left questions in mind, so I went on DeWalt's site. There I found the Model 510 and the DeWalt staples it used. Now that those site pages are GONE (as you also discovered) I can't go back to see what confused me, nor the `small print' that said something to the effect of `discontinued' or `clearance'. The `discontinued' staple matter didn't bother me because I was happy (though apparently still `confused') that the compatibility of other brands of staples would work, including my stock.So, I ordered the DeWalt DWHTTR510 from Amazon.When my shipment from Amazon came in, I immediately got my stock of staples with the intent of stapling EVERYTHING in sight with my new `toy'. WRONG !!! The staples won't fit in the 510 !!!I got back on DeWalt's site to try to find my problem . . . . HARK !!! . . . . the 510 no longer exists, and ALL of the DeWalt part numbers for their staples are different from what they were previously; including those on Amazon and the 510 package !!!This is where your question answered one of mine; the `discontinued' staples I saw were removed from DeWalt's line because they would only fit in the 510 . . . . which was also removed from stock.The 510 was their `Top of the Line' model, now the 410 is (at least, this week). The 2-position power switch is only on the 410 & 510 models.To this day, the DeWalt 510 is sitting staple-less and useless. The project I needed it for was completed with my PoS Swingline 800. Eventually, I'll try to find some `other brand' staples that will work in it; or use it as a hammer.Those reading this, take heed; like many products on Amazon, and the like, this appears to be a dumping ground for discontinued and obsolete items - - - - DO YOUR RESEARCH before hitting `SUBMIT' !!!

Jams frequently? Any suggestions?

I have not had this problem since I figured out how to insert the staples. In my old staplers I inserted the staples from the rear but that was just not how this one works (insert from the front). The only other thing I can think of is that maybe the staples you are using are the wrong size for this device. I wanted to use staples that were too large and they didn't work, but when I dropped down to the right size range the device pretty much never jams. I also have a DeWalt hammer stapler that loads the same way and that never jams either. Good luck!

You have several options. They are all on the side of the stapler. I bought arrow brand nails and staples. Main tip to know is load the staples through the front of the stapler not the back! Took me a lot of time to figure that one.

Desertcart Logo

Join PRO & Unlock Exclusive Perks!

قم بتنزيل التطبيق

نحن مصدر العناصر من

الإمارات
UK
الهند
USA
اليابان

خدمات العملاء

معلومات عنا

دعم العملاء

علاماتنا التجارية الأخرى:Hewyn|Selfship

المراجعات

S**S

DIY projects must have

I have been doing a lot of diy projects around my house and bought this for my stair runner reno. Love anything dewalt but this was a major upgrade from my craft store staple gun. Super lightweight but high functioning. Never jammed once and you can tell it’s good quality and will last.

13.11.2025

D**S

Won't Fail You

This is a Go Getter staple gun!! Love the two choices of power. Quality was built into this tool. I've bought many in the past but now exceed this one. Worth the money for sure and the money isn't all that bad. As long as you use clean staples and nails your good to go. I use this a lot. Does not fail you with jams. Not for me so far anyway. I like it a heck of a lot!

13.01.2025

R**P

Reasonably priced

Love it. Works great. Easy to use

12.02.2026

J**E

Versatility and quality !

Nice multi-Tacker in one plus power and grip. Great value !

27.10.2025

S**Y

Strong and solid

Haven't used all 5 types yet, but I've used a couple and besides a few jams, this works like a charm. Feels really strong and really solid quality like DeWalt usually does. Depending on what you're doing, you may need some strong hands.

31.12.2025

J**E

HERE ARE THE COMPATIBLE STAPLES/BRADS FOR THIS TOOL

For those who would like to know what's compatible, this information is straight from the manual for this tool: Staple & Brad Compatibility HEAVY DUTY Staples Sizes supported: 1/4" (6mm) 5/16" (8mm) 3/8" (10mm) 1/2" (12mm) 9/16" (14mm) Compatible brands/models: DEWALT®: DWHTTA704, DWHTTA705, DWHTTA706, DWHTTA708 STANLEY®: TRA704, TRA705, TRA706, TRA708, TRA709 Arrow®: T50® --- CABLE Staples Sizes supported: 3/8" (10mm) 7/16" (11mm) 1/2" (12mm) 9/16" (14mm) Compatible brands/models: STANLEY®: CT106, CT107, CT108, CT109 Arrow®: T25™ --- NARROW FLAT CROWN Staples Sizes supported: 3/8" (10mm) 1/2" (12mm) Compatible brands/models: STANLEY®: CT306, CT308 Arrow®: T20™ --- LIGHT DUTY Staples Sizes supported: 1/4" (6mm) 5/16" (8mm) 3/8" (10mm) 1/2" (12mm) 9/16" (14mm) Compatible brands/models: STANLEY®: TRA204, TRA205, TRA206, TRA208, TRA209 Arrow®: JT21® --- 18 Gauge Brad Nails Sizes supported: 1/2" (12mm) 5/8" (15mm) Compatible brands/models: DEWALT®: DWHTBN050, DWHTBN625 STANLEY®: SWKBN050, SWKBN625 Arrow®: BN18™

23.01.2026

A**Y

versatile and works great

Wasn't sure I needed another stapler, but this one handles so many different kinds of fasteners that I decided I would give it a whirl. Only tried a couple different lengths of staples so far, but it works like a champ. Glad I got it.

17.12.2025

W**S

Worst Dewalt product I’ve ever bought

This staple gun is awful. I don’t know if I just got a bad one and they are typically good, but I’ve never used a worse stapler. This successfully drives a staple ~20% of the time. With smaller gauge staples it routinely fires multiple staples and usually leaves a couple jammed in the barrel regardless of how the switches are set. With large staples they fail to penetrate whatever surface I’m trying to drive them into and it jams constantly. It was performing so badly I picked up a dollar general stapler and it’s WAY better than this piece of junk. If I could give this 0 stars I would

16.09.2025

A**D

J'ai pas roussi cet article

23.04.2023

S**E

Bought this to upholstery my kitchen chairs, I got it for its versatility of using strong and light staples but also the other type of staples for various projects. At first it jammed a lot and I realized it was because I had the wrong settings for the staples. Good prices, strong and quality products will definitely buy again

1.12.2024

V**V

top

19.02.2026

C**R

Excelente producto, muy buena calidad 👌🏻👌🏻👌🏻, vino con el empaque un poco roto pero todo bien

23.11.2025

L**.

Bom produto

5.06.2025

DEWALT DWHTTR510 5-in-1 Multi-Tacker

التفاصيل

الوصف

المراجعات

الأسئلة الشائعة