Goupchn 5PCS Banana Plug Silicone Test Leads Kit 4mm Fully Insulated Safety Shrouded Stackable Banana Plug with Alligator Crocodile Clips Test Fork Back Probe Pins for Multimeter

This is an awesome set that has come in quite handy at our BMW repair shop. The cables are super flexible & the attachments give you plenty of testing options. The only criticism might be that the alligator clips are a bit stiffly sprung. Still the set was well worth it

With the advent of the use of smaller and smaller component parts - plugs, jacks, connectors, etc. in appliances and automobiles it has become difficult sometimes to find probes and connections which will allow measurement of voltages, resistance, etc. in order to trouble shoot problems.I was happy to find a set of probes that allow access to some of the smallest components in order to check for continuity. I was especially gratified to find this set is compatible with my Craftsman VOM. The jacks for the seat occupant sensor of my Mercedes E350 are very tiny. There is a probe with a needle point for accessing the tiny wires.I have had many times when I needed a third hand to hold two probes on points and hold the meter at the same time. I also have found that if I had a third hand I could probably drink more beer with grace - but that's another review. The important part of this is the use of the included alligator clamps.The importance of a good set of probes cannot be overlooked. If you can't pick up a signal your meter is essentially useless. This true when you are 10 or 15' away from the point being measured. There are 4 ea. leads that are 3' long. The plug end of one lead will fit the jack end of a second lead. With the four leads supplied with this package you can be 12' away from the meter. If you have leads that were supplied with your meter you can plug into the new leads and have a total length of approx. 14' - 15'.If you look at the photo on the left - Lower Right Corner - you can see a green lead plugged into a yellow lead. Very innovative and easy to do.These leads are very good. Look carefully at the photo on the Right. It shows the meter. At the bottom left of the meter you can see the type of jack used. If your meter looks like that you are golden.Good product

The back probe pins are the best probes I have ever found. I use a multimeter everyday and i really like that you can piggy back the banana plugs in this kit and the back probe pins are the best i have ever used. They are not too thin and are extremely sharp. Most back probe pins you can not push it through a wire if you want. Most of the. are too thin and will just bend. These ones are great. You can go through thick insulation easily because they are sturdy and sharp. They are also not brittle. If you want you can bend the. to a desired and angle for reaching some difficult spots. I love them. The alligator clips are kind of weak though. They need a bigger opening and stronger closing stream. Still this kit is worth the price. If i could buy the probes separately I would definitely get extras.

Wires feel like good quality. The ends are slightly cheaper feeling but look premium. The rest of the kit is the same quality you are expecting .

Comparable to matco set

They do what they are supposed to do and have held up very well so far.

I received the probes today and first measured the wire resistance. It comes to ~17 milliohms per meter (the length of probe). That corresponds to ~16 AWG. The actual wire resistance may be a bit lower as I measured with inserted paddle contacts, so plug resistance is also included in the measurement. They are certainly thinner than advertised 14AWG and can be used with ~5-10A circuits; 15A might be a bit too high.To tell truth, I did not expect them to be 14AWG or thicker, they are fine for everyday voltage measurements.But the leads are very flexible, and the idea of insertable end probes is neat. The alligator clips are not silicon and are not flexible, but they consist of two rigid spring-loaded jaws and should work at low temperatures. The needle probes are also very handy, sharp and rigid.So my professional impression is positive.

Just needed some extra clips for testing voltages, etc. and these will do fine. Only complaint is the alligator clips are kind of weak and jaws were smaller and have less grip than I hoped. Stackable feature is nice to have.