[2+3 Pack] LϟK Designed for Samsung Galaxy Note 20 Ultra 5G 6.9 Inch, 2 Pack TPU Film Screen Protector & 3 Pack Camera Lens Protector, Ultrasonic Fingerprint Supported, Locate Tool Precise Alignment

I resisted getting a TPU protector because I thought that it would feel cheap and make decay the quality of the graphics on my Note 10 plus. I wish that I had tried it years ago, when I first purchased the phone. I had a new screen installed recently and want to protect it since, unfortunately, the glass on this phone is not very scratch resistant and without a protector, it gets badly scratched quickly, even when treated very carefully. My first screen was scratched up immediately and I just lived with it. I want to keep the new screen pristine! I have had this protector on the phone for a week and I love it! Unlike the expensive Whitestone dome glass protector I tried (which cracked within 24 hours, with no impact), this protector is able to withstand the normal wear and tear of using a phone. Also, the fingerprint reader did not work with the glass protector. It works perfectly with the TPU protector. I have it on a Note 10 plus. This protector is exactly what I have been looking for. It does really seem to be self healing. A tiny bubble developed on the second day I had it and the bubble disappeared within a few hours. I like the feel of the protector on my finger and with the S-pen. Those who complained about marks from the S-pen must be pressing hard, I use y S-pen a lot and it has made no marks on the protector. Also, the sides are well adhered to the phone. I suspect that the complaints about it not adhering to the curved screen are from people who did not follow the instructions. You need to rub with the applicator toward the edge, before removing the last piece of protective film and then rub for a while on all edges, with a microfiber clothe under your finger. I would describe this last step as "working it in".

I had to get a warranty replacement on my last phone because the phone fell out of my pocket when I crashed my mountain bike and the screen got all scratches up. That phone had a liquid glass protector that was basically painted on. It worked great... Or so I thought. It was supposedly warrantied, which was why I trusted it, until I submitted a claim after the damage and learned it only lasts a year. Whoops. Because when it wears out, you don't really notice. It was like nothing was there, which was why it was so great, but that's because it's like it was not there in the bad ways too. (My gf has it on hers too and she a small hairline crack it didn't prevent either.) So, after the failure of the paint on style I wanted to try something new. I was nervous about this one because it's not the tempered glass I've come to know and love (and trust) on earlier phones. But with the curved screens on new phones, the tempered glass just doesn't always work as well, definitely not providing full screen coverage. This one does, it covers the full screen with little notches for the camera and an actual tempered glass protector for the rear cameras and sensors. I'd say the sensitivity of the fingerprint reader is only very slightly reduced, it almost always works just as well as if it wasn't there. And the self healing nature makes it feel very soft, and it works. I kinda knicked the screen against a corner the other day and it left a noticeable indentation, but it had healed by the end of the day and was no longer noticeable. Installation is a little tricky to avoid getting dust and bubbles, but they provide good tools and instructions, and what screen protector isn't hard to install without bubbles or dust? You get full screen coverage, been using with a slim case just fine, corners/edges starting down/adhered. Really like! Would buy again!

Forward: This protector does not seem to do well with the Ringke black and clear case from my experience. https://www.amazon.com/gp/product/B07VDCKJF4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Update: This screen protector has no issues with the X-Dora case. Is not peeling up the sides at all. Still 4 stars, and still good. The install is not hard, but its not simple. Once you've done it once it's a lot easier. I like the multi layered design of the protector application, but I screwed up the first one because I was "rushing". Pay attention to the video, watch it through then use it as a guide, yes it's in English and many other languages. Protector #1 in the trash... Protector 2 went on like a champ, smooth, clear, no bubbles, insert pat on the back here... a quick wipe of the microfiber cloth and back in the Ringke case... and it separated the screen protector from the phone both corners at the top where the camera is. No worries though, took it out of the case and smoothed it right down, looked good as new... back in the case and it separated again. Guess I put it on misaligned. Smooth it back down and now there are bubbles. Protector 2 in the trash. Protector 3 install... Goes on like a champ again, this time I was more attentive to the alignment making sure the gaps were even to keep the case edges from separating the protector... Back in the case, and the same result. The case started to separate the protector from the top at both corners.... ugh. Conundrum, leave the case off or buy new screen protectors cause this one is most likely going in the trash too. I like the protector. It is nice and clean, installation was not bad after a test run, but hey, they give you three. As it just so happens the do not like to play well with my choice of phone case. I'm not mad... not even annoyed. At the end of the day, its a good screen protector, at a good price for 3. I just wouldn't recommend it if you have the Ringke case. If I am lucky I will get to try it with the X-Dora today and update https://www.amazon.com/gp/product/B07TTK4L8T/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Okay, so seriously this is by far the easiest and best screen protector I've purchased. The people that gave it 1 star obviously didn't follow directions because it's almost impossible to get bubbles if you do. I currently have the Note 10+ and the pre-installed screen protector cracked so I needed a new one. I bought two tempered glass ones prior to this and sent both back because they wouldn't read my fingerprints (Not this company). I'm not a fan of the tempered glass in general so I went with this one and honestly I'm amazed. On my prior Note I had an expensive screen protector that I could replace for free and I thought that one was pretty easy to install but this one is by far superior when it comes to installation design. The written instructions were easy to follow, everything is included for it to come out perfect, and really the process was genius. It made so much sense to do it this way and there's not one single bubble, piece of dust, or flaw. Besides that, my screen is crystal clear, you can't even tell it's on, and the touch sensitivity, including the fingerprint reader works perfectly. It also covers the curves on the side of phone and it didn't peel up at all when putting back on my case. I just put it on so I can't really review on the protection if I dropped it or did something that would scratch the screen but I'm super impressed with it so far.

I didn't realize it has been 3 years since I bought this protector. I just now put on the 2nd protector from the pack. I'm glad I saved the instructions. The guide tool makes it easy and the supplies that come with it make it go on smoothly. And it gives tips (i.e. turning on screen to ensure light aligns with camera). It's very durable. My screen looks new underneath. Sorry, I didn't think to take pictures. But it lasted 3 years of scratches, drops, bumps, etc. And I only changed it because the edges were pulling up because of the case. Definitely recommend.

I love the ease of installation. The alignment tool isn't as unique as they'd want you to believe, but it still works great. I loved the fact these are thinner than other brands leading to less imprinting from S-Pen use, and that that is left behind tends to go away within hours. Truly looks great when installed... ...that is until you put the phone in a case! I have a Samsung Smart Clear View cover, and it pulled the corners of the screen protector up. I thought, ok, I'll take it out of the case and let it sit; may the adhesive needs time to settle? It wouldn't be the first time. I waited the better part of the day and overnight. Put it back in the case and all seemed good. I went to work. Taking the phone out of my pocket, all four corners had pealed up, now two of them were stuck to the plastic of the case and upon opening, it pulled 1/2 of it up. I tried to re-apply, but the damage was done. Enter the second screen protector in the package. I installed it and once again, super easy and clean to install. I let it sit on my desk all day and just used the connection to my PC to use the phone. No biggie. I got it home, still out of a case and the screen guard was perfect. Two days later, still out of the case, and I think I'm good. I gently put the phone into a Spigen case. So far so good. I set the phone on the coffee table where it stayed until I got ready for bed. I picked up the phone and both sides, from top to bottom, and popped up. I took it back out of the case, pressed the sides down and they stuck. Back into the case. The next morning, both sides were popped up again. I'm done. I really liked the way this felt and looked, but if I can't keep it from popping up on the sides, even when the case only grips the corners, I can't use it. I had to order another brand. The problem is, they make theses, as do many companies, so they cover the whole curve of the screen, even the parts that aren't really screen. Unfortunately, these parts are the areas cases grip the phone. Thus far, I've only found one brand that has worked great, but it's thicker - which is why I tried this.

THIS IS A LONG ONE PLEASE READ EVERYTHING Great Product, easy to install, after installing it does have a tendency to lift from the sides due to the nature of the curved screen, if they would have used a thicker and stronger glue it would cause issues with the fingerprint reader, The fingerprint reader works great you do have to press a bit harder than if u didn't have a screen protector that is due to the phone having an ultrasonic reader. So if any one is to blame its Samsung for curving the screen in the first place and changing the fingerprint scanner to an ultrasonic scanner. The old gen before ultrasonic worked even through glass protectors So what I have done to resolve the issue is install this screen protector, and also I bought a unicorn beetle case or also known as (SUPCASE) for my phone, the case has a plastic frame on it that covers the edges of the lifting screen protector thus holding them down and also giving it a smooth seamless finish, also don't add your fingerprint first do it after you install the screen protector, I like to program the same finger twice it works more efficiently I see so many people complaining about how there phone broke... this as a plastic screen protector to pervent scratches not to protect your phone against harsh drops, put on a solid case and take care of your phone an you should be fine, skinny pretty cases don't work P.S. also go into your settings then display scroll down half way and you'll see touch sensitivity turn it on, makes the phone work better with screen protectors

UPDATE 10/2/20: Dropped my rating from 5 to 4 stars. I use the S-Pen very frequently for taking notes and digital art, and the screen protector is soft enough that the pen leaves indents in it. This has given me issues with writing and drawing with the S-Pen, where pen strokes will drop or the pressure sensitivity is no longer smooth. It still seems to function well as a screen protector, but considering I bought a Note phone to use the pen, it's not for me. ORIGINAL REVIEW: First, the part of screen protectors that always troubles me, the installation, is pretty novel for this product. It comes with a plastic guide that slots into the USB-C port so that the protector is guaranteed to be applied straight. Also, the procedure you use to remove the backing from the adhesive side of the protector makes sure that dust doesn't have time to collect on the adhesive. It worked perfectly for me and gave me a screen free of bubbles. The package also includes alcohol wipes, guide stickers, and dust removal stickers for each protector, plus a microfiber cloth. I use this screen protector with a clear kickstand case from Samsung. The top and bottom edges of the screen protector does not touch the case, but the side edges of the protector rest underneath the sides of the case. Very occasionally, some bubbles will form on these edges, but it's easily resolved by lifting up the soft part of the case where the bubble is and allowing the bubble to escape. It's not a huge issue for me, and it's by far the least hassle I've had using a screen protector and a case simultaneously with a curved display. One thing I've observed over the past couple of weeks is that there are now a lot of indents in the protector from daily S-Pen use. I only ever notice it if the screen is off and there is light reflecting off it. It hasn't really impacted the screen's touch or S-Pen sensitivity, and I don't see it at all when the display is on. I'll update this review if this changes down the road.

Si la recomiendo porque para los telefonos con pantalla curva es muy difícil encontrar protector para pantalla que les quede bien, queda un 99% como la de fábrica, prácticamente invisible, si es verdad que se la superficie se auto recupera de las hundiduras por uñas o por la spen al escribir con presión; Recomendado, al menos que quieras algo mas fuerte ,en ese caso sería la de vidrio; Felicitaciones por la entrega ya que fue muy rápida.

The best thing I did in my life is buying this screen protector

While I wasn't looking forward to having to settle for a non-glass screen protector, this one made the switch a piece of cake. This review is a bit long winded but if you're on the edge this may push you over to buying one of these. It's damn near impossible to find a reliable tempered glass screen protector for any phone with a curved edge display. Which is surprising considering at this point almost every phone has some degree of edge curve. However after hours of searching online I came across this screen protector and figured I'd give it a try. The installation process is actually very straight forward, just watch the video and follow along. The included adapter makes it even easier as well. I noticed during installation that the included microfiber left some very small scratches on the protector as I was cleaning it, I grabbed one of my own that I had laying around to see if it was the protector itself and it seems that given the right pressure you can leave very small scratches on the surface that a keen eye may notice. I suspect however that these scratches are fine enough that they'll go away on their own with regular use. As for the protector once it's installed, it barely feels like it's there. The fingerprint reader works like a charm albeit you may need to re-register your fingerprint to get it 100%. Visibly theres also no difference to the screen and the protector becomes invisible once put on. This is a benefit of a non glass protector as they usually use a dot matrix to improve sensitivity that some may notice under certain lighting conditions as well as just normal refraction you'll get from another piece of glass resting ontop of your display. I know I'm starting to sound like a hokey spokesman for the brand but trust me I'm just a guy who's spent far too long installing useless, overpriced, complicated, screen protectors that I know when a good one comes along. Pros ~ Good value (especially for a 2 pack) Easy installation (take your time and follow the video) Adhesive actually sticks to the edges of the screen (a bonafide miracle at this point honestly) Includes 3 glass camera protectors as well Cons ~ Not going to provide any drop protection vs. a tempered glass protector Included microfiber can be a tad scratchy In conclusion, this screen protector is all you need to keep your Note 20 ultra looking prestine, for the price you can't beat it and you could honestly spend a lot more and get less than what you're getting here. Just click that order button and put an end to your search. Cheers, Halen

El producto viene viene empacado es fácil de instalar siguiendo las instrucciones pero cero resistencia no tengo ni una semana con él y ya está roto el protector

The package comes with an alignment tool for an easy peasy flawless install of the protector, even on the edges. The film protector is unbelievably smooth and feels like glass under your fingertips. The screen protector is very responsive to the touch and feels like you're tapping and swiping on the actual Gorilla Glass.